Skip to the content
2 layers65 × 47.4 mmUsb pd water controller, the printed circuit board in 3D

USB C PD pump controller for small plants

Size
65 × 47.4 mm
Copper layers
2
Thickness
1.6 mm
Parts
67
Nets
81
Pads
273
Tracks, vias
373, 139
Pours
27
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
30 May 2026
Updated
30 May 2026

Overview

Usb pd water controller is an open-source printed circuit board by CarloMara, from the CarloMara/usbc-esp32-pump-controller repository on GitHub. It is a 2-layer board of 65 × 47.4 mm with 67 parts on 81 nets, routed with 373 tracks and 139 vias.

It is built around the ESP32-S3-MINI-1-N8, CYPD3177-24LQXQ and AO3400A, with the SS34 and DMP3013SFV among its other parts. Its parts include 23 resistors, 11 capacitors, 8 transistors, 8 connectors and 7 diodes. It belongs with the power boards and the ESP32 boards of this library.

Main components

5

Parts

67
QtyValueFootprintReferences
91kResistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR4, R5, R6, R7, R8, R9, R10, R11, R12
7TestPoint_SmallTestPoint:TestPoint_Pad_D1.0mmTP1, TP3, TP4, TP5, TP6, TP7, TP8
6100Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR16, R17, R18, R19, R20, R21
6AO3400APackage_TO_SOT_SMD:SOT-23Q3, Q4, Q5, Q6, Q7, Q8
6MOTORConnector_PinHeader_2.00mm:PinHeader_1x02_P2.00mm_VerticalJ3, J5, J6, J7, J8, J9
6SS34Diode_SMD:D_SMAD2, D3, D4, D5, D6, D7
510KResistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR2, R13, R14, R15, R22
41uFCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC2, C3, C6, C7
30.1uFCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC4, C5, C8
210uFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC9, C10
222Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR23, R24
2DMP3013SFVPackage_SON:Diodes_PowerDI3333-8Q1, Q2
10.1ufCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC11
115VDiode_SMD:D_1206_3216Metric_Pad1.42x1.75mm_HandSolderD1
13.3uFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC1
147kResistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR3
1CYPD3177-24LQPackage_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.75x2.75mmU1
1ESP32-S3-MINI-1RF_Module:ESP32-S2-MINI-1U2
1SW_PushButton_Switch_SMD:SW_Push_SPST_NO_Alps_SKRKSW1
1Screw_Terminal_01x02Connector_PinHeader_2.00mm:PinHeader_1x02_P2.00mm_VerticalJ2
1USB_C_ReceptacleConnector_USB:USB_C_Receptacle_GCT_USB4110J1

Similar boards

  • 2 layersMy power supply, the printed circuit board in 3D

    My power supply

    malcops/ps_pcb

    KICAD power supply project (TPS54560)

    68 parts1
  • 4 layers62 × 42 mmHybrid Controller, the printed circuit board in 3D

    Hybrid Controller

    DesignStraub/ringwheel-hybrid-drone

    A 5-inch FPV drone whose prop ducts fold down and become wheels. Design study in Fusion 360 and KiCad, CC BY-NC-SA 4.0.

    103 parts
  • 4 layers58.5 × 120.9 mmMainPCB, the printed circuit board in 3D

    MainPCB

    LEDs-by-glowingkitty/GlowTower

    A beautiful looking LED lamp for lighting up your home or setting the right mood at house parties - with animations that can react to music.

    155 parts9GPL-3.0
  • 6 layers140 × 100 mmSbc baseboard, the printed circuit board in 3D

    Sbc baseboard

    calicopizzadelivery/sbc-development-baseboard

    Baseboard for remote management of an attached SBC: K64 MCU as USB HID to the target and Ethernet to the workstation, six switched USB-A ports, isolated SPDT relays, level-shifted console, switched target power

    271 partsApache-2.0
  • 4 layers57.1 × 33.9 mmSabiaR1 v2, the printed circuit board in 3D

    SabiaR1 v2

    CarloCBragagnolo/SABIAR1

    Project files for the Sabiá R1 flight computer

    64 partsGPL-3.0
  • 2 layers68.4 × 36.7 mmEmf beacon, the printed circuit board in 3D

    Emf beacon

    PolybiusBiotech/led_beacon

    The PCBA and firmware for the controllable LED Beacons.

    134 parts
  • 4 layers100 × 75 mmFreedo radio, the printed circuit board in 3D

    Freedo radio

    CappyT/freedo

    Local coordinator for tado V3+ heating devices, with a Home Assistant integration and add-on

    135 parts33Apache-2.0

Questions

How big is the Usb pd water controller PCB?

It measures 65 × 47.4 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Usb pd water controller use?

67 parts, built around the ESP32-S3-MINI-1-N8, CYPD3177-24LQXQ, AO3400A and SS34. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Usb pd water controller KiCad files?

From the CarloMara/usbc-esp32-pump-controller repository on GitHub, at the commit this page was made from: the board is usb_pd_water_controller.kicad_pcb and its schematic usb_pd_water_controller.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Usb pd water controller design in my own project?

Its repository states no licence, so its author keeps all rights: ask CarloMara before reusing the design.