Skip to the content
2 layers212.5 × 122.5 mmErgosmash, the printed circuit board in 3D

Pcb design for a ergonomic rectangle controller with a small footprint.

Size
212.5 × 122.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
41
Nets
40
Pads
200
Tracks, vias
565, 5
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
26 Aug 2022
Updated
26 Aug 2022

Overview

Ergosmash is an open-source printed circuit board by CarlFabian, from the CarlFabian/Ergosmash repository on GitHub, published under the MIT licence. It is a 2-layer board of 212.5 × 122.5 mm with 41 parts on 40 nets, routed with 565 tracks and 5 vias.

Its parts include 20 diodes, 20 switches and 1 IC. It belongs with the SAM D and SAM boards of this library.

README

README.md

Ergosmash [WIP]

Pcb design for a ergonomic rectangle controller with a small footprint.

Parts

41
QtyValueFootprintReferences
201N4148Diode_THT:D_DO-35_SOD27_P7.62mm_HorizontalD1, D2, D3, D4, D5, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20 +4
20SW_Pushgurtmail:Choc_PG1350_Choc_Spacing_1.8holesSW1, SW2, SW3, SW4, SW5, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20 +4
1SeeeduinoXIAOseeed:Seeeduino XIAO-MOUDLE14P-2.54-21X17.8MMU1

Similar boards

  • 2 layers70 × 35 mmTLF35584 breakout, the printed circuit board in 3D

    TLF35584 breakout

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    41 parts1.2k
  • 2 layers270 × 11 mmDaylight Disco, the printed circuit board in 3D

    Daylight Disco

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    41 parts1.1kGPL-3.0
  • 2 layers27.5 × 48.3 mmICE40DevBoard, the printed circuit board in 3D

    ICE40DevBoard

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    41 parts915
  • 2 layers45 × 25 mmEasy PD Sink, the printed circuit board in 3D

    Easy PD Sink

    openwch/ch32v003

    CH32V003 is an ultra-cheap RISC-V MCU with 2KB SRAM, 16KB flash, and up to 18 GPIOs that sells for under $0.10

    41 parts599
  • 2 layers97 × 78.5 mmDumbpad, the printed circuit board in 3D

    Dumbpad

    imchipwood/dumbpad

    Simple 4x4 numpad with rotary encoder. Powered by QMK via ATmega32u4 Pro Micro

    41 parts517GPL-2.0
  • 2 layers37 × 15 mmCanTactDist, the printed circuit board in 3D

    CanTactDist

    bondus/KlipperToolboard

    A 3D printer tool head controller board

    41 parts373GPL-3.0
  • 2 layers20.3 × 69.7 mmPG attiny404, the printed circuit board in 3D

    PG attiny404

    fabiansteiner/OpenValve

    3D-printable pinch valve for irrigation and sensor-driven liquid control.

    41 parts276CERN-OHL-S-2.0

Questions

How big is the Ergosmash PCB?

It measures 212.5 × 122.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Ergosmash use?

41 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Ergosmash KiCad files?

From the CarlFabian/Ergosmash repository on GitHub, at the commit this page was made from: the board is ergosmash.kicad_pcb and its schematic ergosmash.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Ergosmash design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).