2 layers69.4 × 89.9 mm
2 layers168.9 × 109.2 mm
Node old
CaptnSisko/CHARMCHeap Accessible Resilient Mesh for Remote Locations and Disaster Relief
- Size
- 168.9 × 109.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 64
- Nets
- 106
- Pads
- 279
- Tracks, vias
- 244, 79
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 26 Aug 2022
- Updated
- 8 Dec 2022
Overview
Node old is an open-source printed circuit board by CaptnSisko, from the CaptnSisko/CHARM repository on GitHub. It is a 2-layer board of 168.9 × 109.2 mm with 64 parts on 106 nets, routed with 244 tracks and 79 vias.
It is built around the NEO-M9N-00B, ADS1113IDGS and USB4140-GF-0070-C. Its parts include 21 resistors, 14 capacitors, 9 diodes, 6 ICs and 4 connectors.
Main components
3
NEO-M9N-00B
SMD-24P-167dBm -40℃~+85℃ 2.7V~3.6V 24s 2m 36mA@3.0V GPS、BDS、QZSS、Galileo、GLONASS RTC backup power UART、I2C、USB、SPI、JTAG SMD-24P GNSS Modules ROHSu-bloxGNSS Modules
ADS1113IDGS
MSOP10Ultra-Small, Low-Power, 4 Channels 16-Bit Analog-to-Digital Converter with Internal ReferenceTexas InstrumentsUncategorised
USB4140-GF-0070-C
SMD-25℃~+85℃ 1 3A 48V 6P Black Female Surface Mount,Vertical Type-C SMD USB Connectors ROHSGlobal Connector Technology (GCT)USB Connectors
Parts
64| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 0.1uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C3, C10, C13, C14 |
| 4 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5, R8, R12, R13 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | 220uF | UUD1C221MCL1GS:CAPAE660X800N | C4, C5, C7 |
| 3 | 50k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R9, R21 |
| 2 | 10uF | KiCad:EEE1AA220WR | C6, C12 |
| 2 | 22 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R19, R20 |
| 2 | 27 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R17, R18 |
| 2 | 4.7k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R14, R15 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R6 |
| 1 | 0 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | 10 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R16 |
| 1 | 100nF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C11 |
| 1 | 100uF | 16SVPC100M:16SVF180M | C8 |
| 1 | 100uH | 74437429203101:74437429203101 | L1 |
| 1 | 10uF | EEE-FN1E100R:EEE1AA220WR | C1 |
| 1 | 1N5819 | Diode_THT:D_A-405_P10.16mm_Horizontal | D6 |
| 1 | 1mF | 16SVPF1000M:16SVF1000M | C9 |
| 1 | 2.5A Fuse | Fuse:Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | F1 |
| 1 | 2.94k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7 |
| 1 | 20k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R10 |
| 1 | 220m | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4 |
| 1 | 27nH | Inductor_SMD:L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | L3 |
| 1 | 2x18650 | 1123:1123 | J2 |
| 1 | 330nF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C2 |
| 1 | 50 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R11 |
| 1 | 550mV | B520C-13-F:DIOM7959X250N | D3 |
| 1 | 550mV | SS24FL:SODFL3617X108N | D4 |
| 1 | 68uH | MSS1210-683MED:INDPM120120X1020N | L2 |
| 1 | ADS1113IDGS | Package_SO:TSSOP-10_3x3mm_P0.5mm | U1 |
| 1 | D_TVS | Diode_SMD:D_SOD-523 | D9 |
| 1 | IRF7404 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | Q1 |
| 1 | LED_BUCK | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D5 |
| 1 | LED_CHARGE | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2 |
| 1 | LED_GPS | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D8 |
| 1 | LED_USB | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | LED_WLAN | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D7 |
| 1 | LM2576SX-3.3_NOPB | LM2576SX-3.3_NOPB:KTT0005B | IC2 |
| 1 | LM2585S-12_NOPB | LM2585S-12_NOPB:TO170P1435X465-6N | IC3 |
| 1 | MCP73844-840I_MS | MCP73844:SOP65P490X110-8N | IC1 |
| 1 | NEO-M9N-00B | NEO-M9N-00B:NEOM9N00B | IC4 |
| 1 | OMEGA2_HEADER | Connector_PinSocket_2.00mm:PinSocket_1x06_P2.00mm_Vertical | J4 |
| 1 | Omega2S | Module:Onion_Omega2S | U2 |
| 1 | SW_POWER | L101011MS02Q:CKC5106-ND | SW1 |
| 1 | U.FL-R-SMT_01_ | U.FL-R-SMT_01_:UFLRSMT01 | J3 |
| 1 | USB4140-GF-0070-C | USB4140-GF-0070-C:USB4140GF0070C | J1 |
Questions
How big is the Node old PCB?
It measures 168.9 × 109.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Node old use?
64 parts, built around the NEO-M9N-00B, ADS1113IDGS and USB4140-GF-0070-C. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Node old KiCad files?
From the CaptnSisko/CHARM repository on GitHub, at the commit this page was made from: the board is hardware/node/node_old.kicad_pcb and its schematic hardware/node/node.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Node old design in my own project?
Its repository states no licence, so its author keeps all rights: ask CaptnSisko before reusing the design.
Similar boards
- 4 layers65 × 56 mm
- 2 layers103 × 86.5 mm
- 2 layers200 × 78 mm
- 2 layers28 × 32 mm
TransducerBLE
UT-yakusaku/WirelessIntestine
This is the code for a paper titiled "Wireless Recording and Autoencoder Denoising of Intestinal Activity in Freely Moving Rats"
24 parts - 2 layers
- 2 layers
Shift Control Unit
Nomalah/Budget-Racing-Electronics
All electronics for the budget racing vehicle
27 parts - 4 layers136.5 × 95.3 mm
ThrusterV3
RoboSubLA/wailord_electrical
RoboSubLA Wailord 2022-2023 Electrical Design Repository
70 partsGPL-3.0