

SNES2TOWNS
Code for Fujitsu FM-7 and FM TOWNS series computers
- Size
- 67 × 50.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 20
- Nets
- 47
- Pads
- 110
- Tracks, vias
- 308, 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 30 Nov 2019
- Updated
- 11 Aug 2026
Overview
SNES2TOWNS is an open-source printed circuit board by captainys, from the captainys/FM repository on GitHub. It is a 2-layer board of 67 × 50.8 mm with 20 parts on 47 nets, routed with 308 tracks and 2 vias.
It is built around the 74HC157D and PCM13SMTR. Its parts include 7 resistors, 4 connectors, 2 capacitors, 2 ICs and 1 switch. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
274HC157D
SO-16-40℃~+125℃ 10ns@6.0V,50pF 160uA 2V~6V 5.2mA 5.2mA 74HC 8/4 Multiplexer Single Supply SOIC-16 Signal Switches, Multiplexers, Decoders ROHSNexperiaSignal Switches / Encoders & Decoders / MultiplexersPCM13SMTR
SMD-20℃~+85℃ 6V PC Pin Rectangular Columnar SP3T Surface Mount,Vertical SMD Slide Switches ROHSC&KSlide Switches
Parts
20| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 4.7K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R6, R7, R8 |
| 2 | 0.1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2 |
| 2 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
| 2 | 74HC157 | Package_DIP:DIP-16_W7.62mm_Socket | U1, U2 |
| 1 | 220 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 1 | ArduinoNANOP16_P30 | Connector_PinSocket_2.54mm:PinSocket_1x15_P2.54mm_Vertical | J9 |
| 1 | ArduinoNANOP1_P15 | Connector_PinSocket_2.54mm:PinSocket_1x15_P2.54mm_Vertical | J8 |
| 1 | DE9_Receptacle | Connector_Dsub:DSUB-9_Female_Vertical_P2.77x2.84mm | J1 |
| 1 | PCM13SMTR | Button_Switch_SMD:SW_SP3T_PCM13 | SW1 |
| 1 | SNES_CONTROLLER | SNES:SNES_Controller | J6 |
The 16 most common of 20 parts.
More from captainys/FM
8- 2 layers123.2 × 77.5 mm

- 2 layers123.2 × 77.5 mm

- 2 layers79.6 × 47.2 mm

- 2 layers79.1 × 50.5 mm

- 2 layers78.5 × 47.2 mm

- 2 layers26.7 × 40.6 mm

- 2 layers52.7 × 19.7 mm

- 2 layers19.9 × 40.4 mm

Similar boards
- 2 layers100 × 62 mm

Esp32s3aprs
mcapdeville/esp32s3aprs
ESP32s3 APRS beacon/tracker/logger, USB kiss TNC , USB audio FM tranceiver with Micropython shell
156 parts8CERN-OHL-S-2.0 - 4 layers54 × 64 mm

- 2 layers32.4 × 52.7 mm

Isolated UART
zemonkey/Isolated_UART
An isolated USB to UART/RS232/RS485 module using FT231XS.
32 parts - 2 layers77.5 × 29.2 mm

- 2 layers72 × 72 mm

Air quality pcb v6
NilsEngelbach/air-quality-pcb
Seventh iteration: ESP8266 → ESP32-C3 (native USB, no UART bridge), fixes from the v6 design review, right-angle switches with longer actuators, a STEMMA QT port for optional sensors, and charge-status sensing.
72 parts - 2 layers245.1 × 160 mm

8-Bit CPU 32k
slu4coder/Minimal-64x4-Home-Computer
My DIY TTL home computer with VGA and PS/2 and 4x the processing power of a Commodore C64 or Apple II.
139 parts326 - 2 layers229.9 × 111.8 mm

- 2 layers216 × 150 mm

Motherboard-101
artemisamsx/artemisa
Schematics, PCB designs and HDL simulations to build a 8-bits MSX computer
124 parts67
Questions
How big is the SNES2TOWNS PCB?
It measures 67 × 50.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the SNES2TOWNS use?
20 parts, built around the 74HC157D and PCM13SMTR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SNES2TOWNS KiCad files?
From the captainys/FM repository on GitHub, at the commit this page was made from: the board is TOWNS/KiCAD/SNES2TOWNS/SNES2TOWNS.kicad_pcb and its schematic TOWNS/KiCAD/AD-D15NEEquivalent/AD-D15NE/AD-D15NE.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the SNES2TOWNS design in my own project?
Its repository states no licence, so its author keeps all rights: ask captainys before reusing the design.