

TigerCub, an accessible PocketQube platform.
- Size
- 42 × 42 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 10
- Nets
- 84
- Pads
- 110
- Tracks, vias
- 98, 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 16 Apr 2024
- Updated
- 8 Oct 2025
Overview
Obc is an open-source printed circuit board by candacedo, from the candacedo/tigercub-pq repository on GitHub, published under the MIT licence. It is a 2-layer board of 42 × 42 mm with 10 parts on 84 nets, routed with 98 tracks and 1 via.
Its parts include 5 connectors and 1 IC. It belongs with the NXP (LPC, Kinetis, i.MX RT) boards of this library.
README
README.mdTigerCub PocketQube Platform
TigerCub, an accessible, mission-agnostic PocketQube platform.
TigerCub is a satellite bus in the PocketQube form factor, designed to be accessible to students and amateur nanosatellite developers. It uses primarily commercial-off-the-shelf (COTS) components and relatively simple custom-designed PCBs, lowering barriers of entry for developers who are venturing into the PocketQube world.
I developed TigerCub for my undergraduate senior independent work. The vast majority of design work is complete and some subsystems have been tested in laboratory environments, but the satellite bus has yet to undergo full functional testing and testing in flight-like environments. Please use at your own risk.
Technical Overview
TigerCub includes the following subsystems:
- on-board computer and attitude determination system,
- electrical power system,
- radio communication system, and
- chassis.
The on-board computer/attitude determination system features an Arduino-programmable Teensy 4.0 as well as a COTS IMU and COTS MicroSD storage from SparkFun. The communication system uses the RockBLOCK 9603, a compact and lightweight communications module that transmits and receives via the Iridium network. The electrical power system is composed of a power management and distribution module designed by BHDynamics, custom-designed solar panels, and a Lithium-ion battery. These subsystems are all integrated into a sheet-metal chassis, with additional space for a payload.
All CAD was created in PTC Creo Parametric (Version 9.0.0.0), which is free for students. All schematics and PCB designs were created in KiCAD, a free EDA software.
Documentation
For additional technical and operational details, including design decisions, bill of materials, power and thermal analyses, and sample code, see the "TigerCub_Report" PDF file in the repository. Please reach out to cdo32 [at] gatech [dot] edu or mgalvin [at] princeton [dot] edu for further questions.
Future Work & Things to Fix
A few features that should to be fixed/added (not an exhaustive list):
- Kill switches should serve as a break point between the battery and the on-board computer instead of just being connected to the on-board computer. This will involve some redesign of the backplate and wire routing.
- Flight software needs to be developed for the EPS module and expanded upon for the flight computer. (See technical report for additional details.)
- The RockBLOCK radio system has two electrolyic supercapacitors that are a potential outgassing risk. These should be swapped out for space-qualified capacitors.
- The thermal analysis (see technical report) suggests that the spacecraft may operate outside the temperature limits of the battery. The battery should be insulated to protect it from temperature extremes. See technical report for a few suggestions.
Parts
10| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole_Pad | thesis:MountingHole_2.5mm_Pad | H1, H2, H3, H4 |
| 1 | 53048-0510 | thesis:530480510 | J3 |
| 1 | 530480210 | thesis:Molex_Picoblade_2x1_horz | J6 |
| 1 | Teensy4.0 | thesis:Teensy40 | U2 |
| 1 | ~ | Connector_PinSocket_2.00mm:PinSocket_1x05_P2.00mm_Vertical | J5 |
| 1 | ~ | Connector_PinSocket_2.00mm:PinSocket_1x10_P2.00mm_Vertical | J1 |
| 1 | ~ | Connector_PinSocket_1.27mm:PinSocket_2x20_P1.27mm_Vertical | J4 |
More from candacedo/tigercub-pq
3- 2 layers42 × 42 mm

- 2 layers50 × 45.5 mm

- 2 layers58 × 64 mm

Similar boards
- 2 layers57 × 55.2 mm

LogicAnalyzer
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software
10 parts5.1kGPL-3.0 - 2 layers32.2 × 15.4 mm

Protector
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.
10 parts4.3kMIT - 2 layers14.4 × 10.1 mm

Q3Q SWAB A1-00 Temperature + Test Points + OPT3001
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
10 parts2.1k - 2 layers26 × 18 mm

- 2 layers44.3 × 30.5 mm

Lime2-SATA RevA
OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C
10 parts1.5k - 2 layers150 × 50 mm

Breakout 55pin 963063-15-Connector
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
10 parts1.2k - 2 layers17.8 × 43.2 mm

Nano Adapter
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
10 parts1.1kGPL-3.0 - 2 layers53.9 × 23.2 mm

Buffer
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
10 parts1kGPL-3.0
Questions
How big is the Obc PCB?
It measures 42 × 42 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Obc use?
10 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Obc KiCad files?
From the candacedo/tigercub-pq repository on GitHub, at the commit this page was made from: the board is OBC1/obc.kicad_pcb and its schematic Backplate/kill-switch.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Obc design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).