
Lotus58 Glow 124
TweetyDaBird/Lotus-58-Classic
A split ergo linear keyboard derived from the Lily58 family

12u or 10u ortho split pcb
Graham cracker is an open-source printed circuit board by calvin-mcd, from the calvin-mcd/graham-cracker repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 233.8 × 76.2 mm with 131 parts on 84 nets, routed with 433 tracks and 6 vias.
Its parts include 48 diodes, 4 connectors, 4 switches and 2 ICs. It belongs with the nRF52 and nRF5x boards of this library.
The graham cracker is ortho split pcb using two XIAO BLEs for bluetooth connectivity. The pcb can either be used as 4x6 (12u wide) or 4x5 (10u wide) by breaking off one column of each side. Both smd and tht diodes as well as 2 MSK12C02 power switches are supported.
layout is by seirin_blu, pcb design by calvin-mcd.

seirin_blu will design a case suitable for 3d printing.
Please note that this project is a work in progress with no guarantees of a working outcome. No-one involved in this project is responsible for any usage issues that may arise. However, feel free to edit, modify and otherwise utilise these files.
This project is released under the GPL v3 License. Please refer to the LICENCE file.
And, as always big thanks to the 40s community!
Any questions, contact calvin0563 on Discord.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 50 | MX_SW_solder | PCM_marbastlib-mx:SW_MX_1u | MX1, MX2, MX10, MX11, MX12, MX13, MX14, MX15, MX16, MX17, MX18, MX19, MX20, MX21, MX22, MX23 +34 |
| 48 | D_Small | kbd:D3_TH_SMD_v2 | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +32 |
| 8 | MountingHole | MountingHole:MountingHole_2.2mm_M2_DIN965 | H1, H2, H3, H4, H5, H6, H7, H8 |
| 3 | LOGO | LOGO | G***, G***, G*** |
| 2 | 2 | PCM_marbastlib-mx:STAB_MX_P_2u | S2, S3 |
| 2 | 3 | PCM_marbastlib-mx:STAB_MX_P_3u | S1, S4 |
| 2 | 5.5mm | PCM_marbastlib-various:mousebites_5p5mm_easysnap | MB5, MB5 |
| 2 | Conn_01x02_Female | Connector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J1, J2 |
| 2 | Conn_01x02_Socket | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3, J4 |
| 2 | SW_SPDT | PCM_marbastlib-various:SW_MSK12C02-HB | PSW1, PSW2 |
| 2 | Seeeduino Xiao nRF52840 | PCM_marbastlib-xp-promicroish:Xiao_nRF52840_AH_Pogo | U1, U2 |
The 123 most common of 131 parts.

TweetyDaBird/Lotus-58-Classic
A split ergo linear keyboard derived from the Lily58 family

Ardumower/ardumower
Develop an open source robotic lawn mower (HW+SW reference platform)



seniorsoftwarevlogger/takmak
Takmak is the 65% orthogonal staggered columns split keyboard

tmarhguy/alu
8-bit combinational ALU built from scratch with 3,488 CMOS transistors (KiCad + SPICE + Logisim + 1.24M tests


xavierbasc/dm50
DM50 is a cheap, powerful, easy to build, open source hardware, and high precision calculator.
It measures 233.8 × 76.2 mm and has 2 copper layers, 1.6 mm thick.
131 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the calvin-mcd/graham-cracker repository on GitHub, at the commit this page was made from: the board is Project/graham cracker.kicad_pcb and its schematic Project/graham cracker.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).