
Panel
calithameridi/corevus
High-flexibility, low-cost mechatronics controller for 3D printers

High-flexibility, low-cost mechatronics controller for 3D printers
Toolboard bridge is an open-source printed circuit board by calithameridi, from the calithameridi/corevus repository on GitHub. It is a 2-layer board of 50 × 30 mm with 43 parts on 32 nets, routed with 59 tracks and 0 vias.
It is built around the TPS54335ADDA and DPO2039DAB. Its parts include 14 resistors, 12 capacitors, 6 connectors, 2 ICs and 2 diodes. It belongs with the interfaces and adapters boards of this library.
Copyright 2024 by meridi (myself), all rights reserved until I decide on a suitable license
Corevus-G v0.6 printer mainboards are available for evaluation and beta testing. Join the discord:
discord (dot) gg (slash) W 5 m a f w 2 k Y h. See the Corevus-G v0.6 manual here for more information.
High performance, low-ish price control board for 3D printers.

(For older hardware releases, also see the CvG v0.4 manual)
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_DIN965 | H1, H2, H3, H4 |
| 3 | 100kΩ | PCM_ME_passives:0402R | R8, R13, R14 |
| 2 | 220kΩ | PCM_ME_passives:0402R | R2, R3 |
| 2 | 220μF 35V | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C8, C9 |
| 2 | 22μF 25V | Capacitor_SMD:C_1206_3216Metric | C5, C6 |
| 2 | 5.1kΩ | PCM_ME_passives:0402R | R11, R12 |
| 1 | 100nF | PCM_ME_passives:0402C | C4 |
| 1 | 100nF 25V | PCM_ME_passives:0402C | C12 |
| 1 | 10A | corevus:XF-506P | F1 |
| 1 | 10μF 50V | Capacitor_SMD:C_1206_3216Metric | C1 |
| 1 | 12V SRD-C | Relay_THT:Relay_SPDT_SANYOU_SRD_Series_Form_C | K1 |
| 1 | 18kΩ | PCM_ME_passives:0402R | R1 |
| 1 | 1kΩ | PCM_ME_passives:0402R | R10 |
| 1 | 1x2P | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | 1x3P | corevus:PinHeader_1x03_P2.54mm_Vertical | J5 |
| 1 | 1μF | PCM_ME_passives:0402C | C11 |
| 1 | 2.2nF | PCM_ME_passives:0402C | C2 |
| 1 | 220μF 25V | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C7 |
| 1 | 24kΩ | PCM_ME_passives:0402R | R4 |
| 1 | 2P 9.5mm | corevus:Kefa_KF8500-8.5-2P | J4 |
| 1 | 3.3kΩ | PCM_ME_passives:0603R | R6 |
| 1 | 33pF | PCM_ME_passives:0402C | C3 |
| 1 | 47kΩ | PCM_ME_passives:0603R | R5 |
| 1 | 47kΩ | PCM_ME_passives:0402R | R7 |
| 1 | ??μH | corevus:L_Changjiang_FXL0640 | L1 |
| 1 | ?F | Capacitor_SMD:C_1206_3216Metric | C10 |
| 1 | DPO2039 | Package_DFN_QFN:VQFN-16-1EP_3x3mm_P0.5mm_EP1.6x1.6mm | U2 |
| 1 | Grn | PCM_ME_passives:0603LED | D1 |
| 1 | MF3 2x04P | corevus:Molex_Micro-Fit-3.0_430450813 | J2 |
| 1 | Red | PCM_ME_passives:0603LED | D2 |
| 1 | TPS54335A | Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.95x4.9mm_Mask2.71x3.4mm_ThermalVias | U1 |
| 1 | USB-C 16P | corevus:USB_Type-C_16p | J1 |
| 1 | XH 1x2P | corevus:JST_XH_1x02 | J6 |
| 1 | xkΩ | PCM_ME_passives:0402R | R9 |

calithameridi/corevus
High-flexibility, low-cost mechatronics controller for 3D printers

calithameridi/corevus
High-flexibility, low-cost mechatronics controller for 3D printers

calithameridi/corevus
High-flexibility, low-cost mechatronics controller for 3D printers

calithameridi/corevus
High-flexibility, low-cost mechatronics controller for 3D printers

calithameridi/corevus
High-flexibility, low-cost mechatronics controller for 3D printers

calithameridi/corevus
High-flexibility, low-cost mechatronics controller for 3D printers

calithameridi/corevus
High-flexibility, low-cost mechatronics controller for 3D printers

calithameridi/corevus
High-flexibility, low-cost mechatronics controller for 3D printers

calithameridi/corevus
High-flexibility, low-cost mechatronics controller for 3D printers

calithameridi/corevus
High-flexibility, low-cost mechatronics controller for 3D printers

calithameridi/corevus
High-flexibility, low-cost mechatronics controller for 3D printers

calithameridi/corevus
High-flexibility, low-cost mechatronics controller for 3D printers


generationmake/Stromwaechter_PCB
PCB with current sensors for 12 V battery systems

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

rusefi/rusefi
rusefi - GPL internal combustion engine control unit


jrsteensen/OpenHornet
OpenHornet 1:1 F/A-18C Simulator Repository


tebl/RC6502-Apple-1-Replica
An expandable SBC-version of the Apple 1 computer, easy to get started with and lot of cool stuff that can be added to it!
It measures 50 × 30 mm and has 2 copper layers, 1.6 mm thick.
43 parts, built around the TPS54335ADDA and DPO2039DAB. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the calithameridi/corevus repository on GitHub, at the commit this page was made from: the board is hardware/toolboard-bridge/toolboard-bridge.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask calithameridi before reusing the design.