
Panel
calithameridi/corevus
High-flexibility, low-cost mechatronics controller for 3D printers

High-flexibility, low-cost mechatronics controller for 3D printers
Corevus toolboard panelize2 is an open-source printed circuit board by calithameridi, from the calithameridi/corevus repository on GitHub. It is a 4-layer board of 80 × 80 mm with 364 parts on 71 nets, routed with 2,488 tracks and 500 vias.
It is built around the STM32G431KBU3, 74LVC1G17Z and LIS2DE12, with the SPX3819M5-L-3-3, TMC2209-LA and TPS54302 among its other parts. Its parts include 136 capacitors, 84 resistors, 40 connectors, 24 ICs and 16 diodes. It belongs with the STM32 boards of this library.
Copyright 2024 by meridi (myself), all rights reserved until I decide on a suitable license
Corevus-G v0.6 printer mainboards are available for evaluation and beta testing. Join the discord:
discord (dot) gg (slash) W 5 m a f w 2 k Y h. See the Corevus-G v0.6 manual here for more information.
High performance, low-ish price control board for 3D printers.

(For older hardware releases, also see the CvG v0.4 manual)
| Qty | Value | Footprint | References |
|---|---|---|---|
| 44 | 4.7µF 50V | Capacitor_SMD:C_0805_2012Metric | C14, C14, C14, C14, C15, C15, C15, C15, C16, C16, C16, C16, C17, C17, C17, C17 +28 |
| 36 | 2.2µF | AlphaLib:0402C | C1, C1, C1, C1, C11, C11, C11, C11, C12, C12, C12, C12, C13, C13, C13, C13 +20 |
| 16 | 10kΩ | AlphaLib:0402R | R2, R2, R2, R2, R14, R14, R14, R14, R18, R18, R18, R18, R19, R19, R19, R19 |
| 16 | 10pF | AlphaLib:0402C | C2, C2, C2, C2, C3, C3, C3, C3, C24, C24, C24, C24, C25, C25, C25, C25 |
| 16 | 2.2kΩ | AlphaLib:0402R | R7, R7, R7, R7, R13, R13, R13, R13, R17, R17, R17, R17, R21, R21, R21, R21 |
| 12 | XH | corevus:JST_XH_1x02 | J5, J5, J5, J5, J6, J6, J6, J6, J7, J7, J7, J7 |
| 8 | 100mΩ | Resistor_SMD:R_0805_2012Metric | R5, R5, R5, R5, R6, R6, R6, R6 |
| 8 | 1kΩ | AlphaLib:0402R | R1, R1, R1, R1, R12, R12, R12, R12 |
| 8 | 33Ω | AlphaLib:0402R | R3, R3, R3, R3, R4, R4, R4, R4 |
| 8 | 510kΩ | AlphaLib:0402R | R8, R8, R8, R8, R20, R20, R20, R20 |
| 8 | AO3400 | Package_TO_SOT_SMD:SOT-23 | Q4, Q4, Q4, Q4, Q5, Q5, Q5, Q5 |
| 8 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H1, H1, H1, H2, H2, H2, H2 |
| 8 | XH | corevus:JST_XH_1x03 | J2, J2, J2, J2, J9, J9, J9, J9 |
| 4 | 100nF | AlphaLib:0402C | C10, C10, C10, C10 |
| 4 | 100nF 50V | AlphaLib:0402C | C23, C23, C23, C23 |
| 4 | 100kΩ | AlphaLib:0402R | R9, R9, R9, R9 |
| 4 | 100nF | AlphaLib:0402C | C29, C29, C29, C29 |
| 4 | 100nF | AlphaLib:0402C | C7, C7, C7, C7 |
| 4 | 100nF 16V | AlphaLib:0402C | C8, C8, C8, C8 |
| 4 | 100nF 50V | AlphaLib:0402C | C9, C9, C9, C9 |
| 4 | 10kΩ 3950K | AlphaLib:0402R | TH1, TH1, TH1, TH1 |
| 4 | 10nF | AlphaLib:0402C | C31, C31, C31, C31 |
| 4 | 10µF | Capacitor_SMD:C_0805_2012Metric | C33, C33, C33, C33 |
| 4 | 10µF 25V | Capacitor_SMD:C_0805_2012Metric | C32, C32, C32, C32 |
| 4 | 10µH | corevus:L_Changjiang_FTC2520 | L1, L1, L1, L1 |
| 4 | 150kΩ | AlphaLib:0402R | R11, R11, R11, R11 |
| 4 | 1x3P | corevus:PinHeader_1x03_P2.54mm_Vertical | J10, J10, J10, J10 |
| 4 | 20kΩ | AlphaLib:0402R | R10, R10, R10, R10 |
| 4 | 4.7kΩ | AlphaLib:0402R | R16, R16, R16, R16 |
| 4 | 4148 | corevus:D_SOD-323 | D1, D1, D1, D1 |
| 4 | 51Ω | AlphaLib:0402R | R15, R15, R15, R15 |
| 4 | 68pF | AlphaLib:0402C | C28, C28, C28, C28 |
| 4 | 74LVC1G17 | Package_TO_SOT_SMD:SOT-23-5 | U5, U5, U5, U5 |
| 4 | AO3401A | Package_TO_SOT_SMD:SOT-23 | Q3, Q3, Q3, Q3 |
| 4 | GZ1005 | AlphaLib:0402 | FB1, FB1, FB1, FB1 |
| 4 | Grn | AlphaLib:0402LED | D4, D4, D4, D4 |
| 4 | Grn | corevus:XL1606 | D3, D3, D3, D3 |
| 4 | LIS2DE12 | Package_LGA:LGA-12_2x2mm_P0.5mm | U1, U1, U1, U1 |
| 4 | MF3 | corevus:Molex_Micro-Fit-3.0_436500215 | J1, J1, J1, J1 |
| 4 | MF3 | corevus:XKB_X3025WRS-2x04E | J3, J3, J3, J3 |
| 4 | NMOS | corevus:MOSFET_DFN8 | Q2, Q2, Q2, Q2 |
| 4 | NetTie_2 | corevus:NetTie-2_SMD_Pad0.1mm | NT1, NT1, NT1, NT1 |
| 4 | RST | corevus:ShouHan_TS24CA | SW1, SW1, SW1, SW1 |
| 4 | Red | corevus:XL1606 | D2, D2, D2, D2 |
| 4 | SPX3819M5-L-3-3 | Package_TO_SOT_SMD:SOT-23-5 | U6, U6, U6, U6 |
| 4 | STM32G431KBU3 | Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.45x3.45mm | U3, U3, U3, U3 |
| 4 | TMC2209-LA | Package_DFN_QFN:TQFN-28-1EP_5x5mm_P0.5mm_EP3.25x3.25mm_ThermalVias | U4, U4, U4, U4 |
| 4 | TPS54302 | Package_TO_SOT_SMD:SOT-23-6 | U2, U2, U2, U2 |
| 4 | XH | corevus:JST_XH_1x04-Side | J4, J4, J4, J4 |
| 4 | XRCGB25 | Crystal:Crystal_SMD_2016-4Pin_2.0x1.6mm | Y1, Y1, Y1, Y1 |
| 4 | pinheader | corevus:PinHeader_1x08_P2.54mm_Vertical | J8, J8, J8, J8 |
| 2 | , |
The 350 most common of 364 parts.

calithameridi/corevus
High-flexibility, low-cost mechatronics controller for 3D printers

calithameridi/corevus
High-flexibility, low-cost mechatronics controller for 3D printers

calithameridi/corevus
High-flexibility, low-cost mechatronics controller for 3D printers

calithameridi/corevus
High-flexibility, low-cost mechatronics controller for 3D printers

calithameridi/corevus
High-flexibility, low-cost mechatronics controller for 3D printers

calithameridi/corevus
High-flexibility, low-cost mechatronics controller for 3D printers

calithameridi/corevus
High-flexibility, low-cost mechatronics controller for 3D printers

calithameridi/corevus
High-flexibility, low-cost mechatronics controller for 3D printers

calithameridi/corevus
High-flexibility, low-cost mechatronics controller for 3D printers

calithameridi/corevus
High-flexibility, low-cost mechatronics controller for 3D printers

calithameridi/corevus
High-flexibility, low-cost mechatronics controller for 3D printers

calithameridi/corevus
High-flexibility, low-cost mechatronics controller for 3D printers

DevCyclonekitten/Bambu-A1-Klipper
A repository about the development of modifying a bambu labs a1 printer to run on klipper


entropia/Teebeutel-Hardware
Teebeutel (eng. Teabag) is an electronic, Entropia themed con-badge for the GPN20, featuring an ESP32 microprocessor running micropython.


XyrusB2010/XYmatics-E64
A 5-axis Klipper mainboard, powered by a Raspberry Pi Compute Module and STM32F407

Robast-GmbH/PCB_Designs
This repository contains all the necessary files and instructions for the PCBs that are designed using KiCad. Here is an overview of the main components: - .github: Contains Github-specific configurations, including…

Tjeerdie/SPECTRE
Speeduino compatible engine control unit (ECU) based around black STM32F407VET6 board.

It measures 80 × 80 mm and has 4 copper layers, 1.6 mm thick.
364 parts, built around the STM32G431KBU3, 74LVC1G17Z, LIS2DE12 and SPX3819M5-L-3-3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the calithameridi/corevus repository on GitHub, at the commit this page was made from: the board is hardware/corevus-toolboard/corevus-toolboard-panelize2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask calithameridi before reusing the design.