
In9 Music Visualizer RevC
cadenhillis/IN9-Music-Visualizer
Teensy 3.6 Based Music Visualizer utilizing the built-in audio library

Teensy 3.6 Based Music Visualizer utilizing the built-in audio library
In9 Music Visualizer RevC is an open-source printed circuit board by cadenhillis, from the cadenhillis/IN9-Music-Visualizer repository on GitHub. It is a 4-layer board of 127 × 76.2 mm with 105 parts on 101 nets, routed with 330 tracks and 93 vias.
It is built around the LMV358, LM3478MA and TPS561201DDC, with the FZT857TA, MUR860J and STF13NM60N among its other parts. Its parts include 38 resistors, 36 capacitors, 13 transistors, 4 connectors and 3 ICs. It belongs with the audio and music boards of this library.
Teensy 3.6 Based Music Visualizer utilizing the built-in audio library
11 IN9 Nixie tubes are driven thru low side BJT current sinks. Controllable thru the Teensy's PWM and powerful Audio Library.
The 12-150V boost supply is no laughing matter, by far the hardest to design -- as 11 IN9's can draw a peak of 20W. The medium power and high-voltage are quite a challenge for any electronics hobbiest.

| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 180 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R23, R24, R25, R26, R27, R28, R34, R35, R36, R37, R38 |
| 11 | 2.2k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R17, R18, R19, R20, R21, R22, R29, R30, R31, R32, R33 |
| 11 | 4.7uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C26, C27, C28, C29, C30, C31, C32, C33, C34, C35, C36 |
| 11 | FZT857TA | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | Q3, Q4, Q5, Q6, Q7, Q8, Q9, Q10, Q11, Q12, Q13 |
| 6 | 0.1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C3, C4, C14, C18, C21 |
| 4 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R5, R6, R16 |
| 4 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6, C7, C19, C20 |
| 4 | 1uF | Capacitor_SMD:C_2220_5650Metric_Pad1.97x5.40mm_HandSolder | C10, C11, C12, C13 |
| 2 | 100uF | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C5, C22 |
| 2 | 22uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C24, C25 |
| 2 | 49.9k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R12, R14 |
| 2 | 82uF | Capacitor_THT:CP_Radial_D18.0mm_P7.50mm | C8, C9 |
| 2 | PWR_IN | My_Library:640456-2 | J1, J2 |
| 1 | 0.0 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R10 |
| 1 | 0.16uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C15 |
| 1 | 1.6k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R11 |
| 1 | 10nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C17 |
| 1 | 180k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8 |
| 1 | 1M | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R9 |
| 1 | 20 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7 |
| 1 | 20k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4 |
| 1 | 22pF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C23 |
| 1 | 3.3nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C16 |
| 1 | 330 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 1 | 330uH | My_Library:L_Murata_6000B | L1 |
| 1 | 39m | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R13 |
| 1 | 4.7uH | Inductor_SMD:L_Bourns_SRN6045TA | L2 |
| 1 | 52.3k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R15 |
| 1 | 620pF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 1 | 69.8k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | DMN6140L-13 | Package_TO_SOT_SMD:SOT-23_Handsoldering | Q1 |
| 1 | IN9_MOUNTING_BOARD | Connector_PinHeader_2.54mm:PinHeader_2x06_P2.54mm_Vertical | J4 |
| 1 | LM3478 | Package_SO:SO-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | LMV358 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | MIC_INPUT | My_Library:640456-3 | J3 |
| 1 | MUR860J | Diode_SMD:D_SMC_Handsoldering | D1 |
| 1 | STF13NM60N | Package_TO_SOT_THT:TO-220-3_Vertical | Q2 |
| 1 | TPS561201 | Package_TO_SOT_SMD:SOT-23-6 | U3 |
| 1 | Teensy 3.6 | My_Library:Teensy3.6 | MCU1 |
| 1 | V6560W | My_Library:V6560W | HS1 |
The 99 most common of 105 parts.

cadenhillis/IN9-Music-Visualizer
Teensy 3.6 Based Music Visualizer utilizing the built-in audio library

cadenhillis/IN9-Music-Visualizer
Teensy 3.6 Based Music Visualizer utilizing the built-in audio library

cadenhillis/nixie-tube-clock
custom high-voltage boost power supply and nessesary drivers to control IN-12A and IN13 nixies with an adafruit itsybitsy nRF32



Teslafly/Moxie_drive_mini_drv
A motor drive based off https://github.com/vedderb/bldc-hardware using the drv8353 and toshiba fets




dchwebb/Kishoof
Eurorack Wavetable Synthesizer; Dual channel; 64MB internal storage accessed via USB
It measures 127 × 76.2 mm and has 4 copper layers, 1.6 mm thick.
105 parts, built around the LMV358, LM3478MA, TPS561201DDC and FZT857TA. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the cadenhillis/IN9-Music-Visualizer repository on GitHub, at the commit this page was made from: the board is In9 Music Visualizer PCB/In9 Music Visualizer RevC.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask cadenhillis before reusing the design.