

Controller
- Size
- 35 × 21.7 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 53
- Nets
- 50
- Pads
- 205
- Tracks, vias
- 408, 187
- Pours
- 12
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 22 Jun 2024
- Updated
- 18 Aug 2026
Overview
Controller is an open-source printed circuit board by c4deszes, from the c4deszes/bike-front-light repository on GitHub. It is a 4-layer board of 35 × 21.7 mm with 53 parts on 50 nets, routed with 408 tracks and 187 vias.
It is built around the MCP2021A-500E/SN, BUK6Y24-40PX and BUK7Y7R0-40HX, with the BZT52C20-TP and SDT23C15L02 among its other parts. Its parts include 17 capacitors, 16 resistors, 6 diodes, 4 ICs and 3 transistors. It belongs with the SAM D and SAM boards of this library.
Main components
5MCP2021A-500E/SN
SOIC-8-40℃~+125℃ 1 1 6V~18V Transceiver SOIC-8 LIN Transceivers ROHSMicrochip TechnologyLIN TransceiversBUK6Y24-40PX
LFPAK56(PowerSO-8)-55℃~+175℃ 1 P-Channel 1.25nF 100pF 24mΩ@10V 2V 35nC@10V 39A 40V 66W LFPAK56(PowerSO-8) MOSFETs ROHSNexperiaMOSFETsBUK7Y7R0-40HX
LFPAK56(PowerSO-8)-55℃~+175℃ 1 N-channel 1.63nF 139pF 3.6V 40V 571pF 64W 68A 7.4nC@10V 7mΩ@10V N-Channel LFPAK56(PowerSO-8) MOSFETs ROHSNexperiaMOSFETsBZT52C20-TP
SOD-123-65℃~+150℃ 1 Independent 100nA@14V 18.8V~21.2V 20V 225Ω 500mW 55Ω SOD-123 Zener Diodes ROHSMicro Commercial ComponentsZener DiodesSDT23C15L02
SOT-23-55℃~+150℃ 15V 16.7V 1uA 2 350W@8/20us 38V 5A 60pF Bidirectional ESD IEC 61000-4-2 SOT-23 ESD and Surge Protection (TVS/ESD) ROHSBrightkingESD And Surge Protection (TVS/ESD)
Parts
53| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 10k | Resistor_SMD:R_0402_1005Metric | R300, R301, R401, R402, R502, R507, R509, R510 |
| 7 | 100n | Capacitor_SMD:C_0402_1005Metric | C303, C400, C402, C404, C501, C504, C506 |
| 4 | 10u | Capacitor_SMD:C_0805_2012Metric | C300, C401, C403, C502 |
| 4 | 20k | Resistor_SMD:R_0402_1005Metric | R503, R504, R505, R508 |
| 2 | 2.2u | Capacitor_SMD:C_0805_2012Metric | C405, C503 |
| 2 | BAS3005B02 | Diode_SMD:D_SOD-523 | D501, D502 |
| 2 | M2 | MountingHole:MountingHole_2.2mm_M2_Pad_TopOnly | H1, H2 |
| 2 | SS34F-DC | Diode_SMD:D_SMA | D200, D500 |
| 1 | 0.430 | Resistor_SMD:R_1206_3216Metric | R500 |
| 1 | 100u | Capacitor_SMD:CP_Elec_4x5.3 | C500 |
| 1 | 10uH | Inductor_SMD:L_0805_2012Metric | L400 |
| 1 | 15u | local:ASPI-6045 | L500 |
| 1 | 1k | Resistor_SMD:R_0402_1005Metric | R400 |
| 1 | 220p | Capacitor_SMD:C_0603_1608Metric | C302 |
| 1 | 22n | Capacitor_SMD:C_0402_1005Metric | C505 |
| 1 | 22u | Capacitor_SMD:C_0805_2012Metric | C301 |
| 1 | 2N7002 | Package_TO_SOT_SMD:SOT-23 | Q502 |
| 1 | 4.7k | Resistor_SMD:R_0402_1005Metric | R506 |
| 1 | 50m | Resistor_SMD:R_0805_2012Metric | R501 |
| 1 | ATSAMC21E18A-MNT | Package_DFN_QFN:VQFN-32-1EP_5x5mm_P0.5mm_EP3.5x3.5mm | U400 |
| 1 | BUK6Y24-40PX | Package_TO_SOT_SMD:LFPAK56 | Q500 |
| 1 | BUK7Y7R0-40HX | Package_TO_SOT_SMD:LFPAK56 | Q501 |
| 1 | BZT52C20-TP | Diode_SMD:D_SOD-123 | D503 |
| 1 | Conn_02x01 | local:2pinConnector | J500 |
| 1 | Conn_ARM_SWD_TagConnect_TC2030-NL | Connector:Tag-Connect_TC2030-IDC-NL_2x03_P1.27mm_Vertical | J400 |
| 1 | ERT-J0ER103J | Resistor_SMD:R_0402_1005Metric | TH400 |
| 1 | MCP2021A-500E/SN | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U300 |
| 1 | SDT23C15L02 | Package_TO_SOT_SMD:SOT-23 | D300 |
| 1 | TLD509x | Package_SO:Infineon_PG-TSDSO-14-22 | U500 |
| 1 | ~ | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | U100 |
More from c4deszes/bike-front-light
4- 4 layers35 × 21.7 mm

- 2 layers35 × 21.7 mm

- 2 layers

- 2 layers22.4 × 21.3 mm

Similar boards
- 2 layers41.7 × 108.9 mm

- 2 layers37 × 32.5 mm

- 4 layers28.7 × 26 mm

Minifoc esc
murexrobotics/electrical
Highly integrated electronics design and printed circuit boards (PCBs) for the MATE ROV Competition. Attempt the impossible.
53 parts192MIT - 4 layers115 × 85.8 mm

- 4 layers83 × 70 mm

Dual converter pi filter module V1.0
Rack-Robotics/Powercore-V3
electrical-discharge power supply, open-source
53 parts85 - 4 layers14 × 16.5 mm

TLM v1
azerimaker/Penguino-SAMR34
This repo contains all the necessary design and fabrication files for the Penguino SAMR34 RF module and its Feather breakout board.
53 parts61 - 4 layers40 × 23 mm

- 4 layers120.6 × 72.4 mm

Questions
How big is the Controller PCB?
It measures 35 × 21.7 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Controller use?
53 parts, built around the MCP2021A-500E/SN, BUK6Y24-40PX, BUK7Y7R0-40HX and BZT52C20-TP. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Controller KiCad files?
From the c4deszes/bike-front-light repository on GitHub, at the commit this page was made from: the board is hw/design/controller_tld509x/controller.kicad_pcb and its schematic hw/design/connector-pcb/connector-pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Controller design in my own project?
Its repository states no licence, so its author keeps all rights: ask c4deszes before reusing the design.