

Controller
- Size
- 35 × 21.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 45
- Nets
- 41
- Pads
- 152
- Tracks, vias
- 329, 178
- Pours
- 8
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 22 Jun 2024
- Updated
- 18 Aug 2026
Overview
Controller is an open-source printed circuit board by c4deszes, from the c4deszes/bike-front-light repository on GitHub. It is a 2-layer board of 35 × 21.7 mm with 45 parts on 41 nets, routed with 329 tracks and 178 vias.
It is built around the MCP2021A-330E/SN, ILD8150 and SDT23C15L02. Its parts include 17 capacitors, 13 resistors, 4 ICs, 4 diodes and 2 connectors. It belongs with the SAM D and SAM boards of this library.
Main components
3MCP2021A-330E/SN
SOIC-8-40℃~+125℃ 1 6V~18V Thermal shutdown protection、Bus Fault Protection、Local wake-up、Bus wake-up、Low-power mode、TXD timeout protection、Slope control Transceiver ±15kV SOIC-8 LIN Transceivers ROHSMicrochip TechnologyLIN TransceiversILD8150
SOIC-8-150mil-40℃~+150℃ 1 1.5A 2kHz~2MHz 8V~80V Analog、PWM Buck Built-in DC-DC Under Voltage Protection、Over-Temperature Protection (OTP) SOIC-8-150mil LED Drivers ROHSInfineon TechnologiesLED DriversSDT23C15L02
SOT-23-55℃~+150℃ 15V 16.7V 1uA 2 350W@8/20us 38V 5A 60pF Bidirectional ESD IEC 61000-4-2 SOT-23 ESD and Surge Protection (TVS/ESD) ROHSBrightkingESD And Surge Protection (TVS/ESD)
Parts
45| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 10k | Resistor_SMD:R_0402_1005Metric | R300, R301, R401, R402, R502, R503, R504, R505, R507 |
| 5 | 100n | Capacitor_SMD:C_0402_1005Metric | C303, C400, C402, C404, C500 |
| 3 | 10u | Capacitor_SMD:C_0805_2012Metric | C300, C401, C403 |
| 3 | 2.2u | Capacitor_SMD:C_0805_2012Metric | C405, C502, C504 |
| 2 | 1k | Resistor_SMD:R_0402_1005Metric | R400, R501 |
| 2 | 220p | Capacitor_SMD:C_0603_1608Metric | C302, C506 |
| 2 | M2 | MountingHole:MountingHole_2.2mm_M2_Pad_TopOnly | H1, H2 |
| 2 | SS34F-DC | Diode_SMD:D_SMA | D200, D501 |
| 1 | 100u | Capacitor_SMD:CP_Elec_4x5.3 | C501 |
| 1 | 10n | Capacitor_SMD:C_0402_1005Metric | C505 |
| 1 | 10uH | Inductor_SMD:L_0805_2012Metric | L400 |
| 1 | 22n | Capacitor_SMD:C_0603_1608Metric | C503 |
| 1 | 22u | Capacitor_SMD:C_0805_2012Metric | C301 |
| 1 | 22u | local:ASPI-6045 | L500 |
| 1 | 47k | Resistor_SMD:R_0402_1005Metric | R506 |
| 1 | 520m | Resistor_SMD:R_1206_3216Metric | R500 |
| 1 | ATSAMC21E18A-MNT | Package_DFN_QFN:VQFN-32-1EP_5x5mm_P0.5mm_EP3.5x3.5mm | U400 |
| 1 | BAS3005B02 | Diode_SMD:D_SOD-523 | D500 |
| 1 | Conn_02x01 | local:2pinConnector | J500 |
| 1 | Conn_ARM_SWD_TagConnect_TC2030-NL | Connector:Tag-Connect_TC2030-IDC-NL_2x03_P1.27mm_Vertical | J400 |
| 1 | ERT-J0ER103J | Resistor_SMD:R_0402_1005Metric | TH400 |
| 1 | ILD8150 | Package_SO:Infineon_PG-DSO-8-27_3.9x4.9mm_EP2.65x3mm | U500 |
| 1 | MCP2021A-330E/SN | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U300 |
| 1 | SDT23C15L02 | Package_TO_SOT_SMD:SOT-23 | D300 |
| 1 | ~ | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | U100 |
More from c4deszes/bike-front-light
4- 4 layers35 × 21.7 mm

- 4 layers35 × 21.7 mm

- 2 layers

- 2 layers22.4 × 21.3 mm

Similar boards
- 2 layers65.8 × 21.8 mm

- 2 layers37 × 32.5 mm

- 2 layers30 × 61.3 mm

- 2 layers97 × 78.5 mm

Dumbpad
imchipwood/dumbpad
Simple 4x4 numpad with rotary encoder. Powered by QMK via ATmega32u4 Pro Micro
45 parts517GPL-2.0 - 2 layers49.8 × 88.9 mm

- 2 layers26.5 × 34.4 mm

PicoLoaderNSB
makeo/PicoLoader
A cheap and easy to install modchip for the Nintendo GameCube!
45 parts320GPL-2.0 - 2 layers40.2 × 19 mm

- 2 layers63.5 × 63.5 mm

Main pcb
peterkrull/quad
Firmware, hardware and documentation for my autonomous quad copter project
45 parts210GPL-3.0
Questions
How big is the Controller PCB?
It measures 35 × 21.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Controller use?
45 parts, built around the MCP2021A-330E/SN, ILD8150 and SDT23C15L02. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Controller KiCad files?
From the c4deszes/bike-front-light repository on GitHub, at the commit this page was made from: the board is hw/design/controller_ild8150/controller.kicad_pcb and its schematic hw/design/connector-pcb/connector-pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Controller design in my own project?
Its repository states no licence, so its author keeps all rights: ask c4deszes before reusing the design.