2 layers142.5 × 106.4 mm
2 layers119 × 50 mm
Cable panel
c3h9dx/cable_panela cable cross panel for the h9 project
- Size
- 119 × 50 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 34
- Nets
- 13
- Pads
- 91
- Tracks, vias
- 161, 0
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 5 May 2019
- Updated
- 9 May 2019
Overview
Cable panel is an open-source printed circuit board by c3h9dx, from the c3h9dx/cable_panel repository on GitHub. It is a 2-layer board of 119 × 50 mm with 34 parts on 13 nets, routed with 161 tracks and 0 vias.
Its parts include 14 connectors, 5 switches and 1 resistor.
Parts
34| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | CG-90L | Capacitors_THT:C_Disc_D7.5mm_W5.0mm_P10.00mm | GDT1, GDT2, GDT3, GDT4, GDT5, GDT6, GDT7, GDT8, GDT9, GDT10 |
| 1 | 120R | Resistors_SMD:R_1206_HandSoldering | R1 |
| 1 | CAN0 | kfhlib:PCB-PLUS | J2 |
| 1 | CAN0_SHLD | Wire_Pads:SolderWirePad_single_1-2mmDrill | J8 |
| 1 | CAN1 | kfhlib:PCB-PLUS | J3 |
| 1 | CAN1 | Buttons_Switches_THT:SW_DIP_x2_W7.62mm_Slide_LowProfile | SW1 |
| 1 | CAN1_SHLD | Wire_Pads:SolderWirePad_single_1-2mmDrill | J9 |
| 1 | CAN2 | Buttons_Switches_THT:SW_DIP_x2_W7.62mm_Slide_LowProfile | SW2 |
| 1 | CAN2 | kfhlib:PCB-PLUS | J4 |
| 1 | CAN2_SHLD | Wire_Pads:SolderWirePad_single_1-2mmDrill | J10 |
| 1 | CAN3 | Buttons_Switches_THT:SW_DIP_x2_W7.62mm_Slide_LowProfile | SW3 |
| 1 | CAN3 | kfhlib:PCB-PLUS | J5 |
| 1 | CAN3_SHLD | Wire_Pads:SolderWirePad_single_1-2mmDrill | J11 |
| 1 | CAN4 | Buttons_Switches_THT:SW_DIP_x2_W7.62mm_Slide_LowProfile | SW4 |
| 1 | CAN4 | kfhlib:PCB-PLUS | J6 |
| 1 | CAN4_SHLD | Wire_Pads:SolderWirePad_single_1-2mmDrill | J12 |
| 1 | CAN5 | kfhlib:PCB-PLUS | J7 |
| 1 | CAN5 | Buttons_Switches_THT:SW_DIP_x2_W7.62mm_Slide_LowProfile | SW5 |
| 1 | CAN5_SHLD | Wire_Pads:SolderWirePad_single_1-2mmDrill | J13 |
| 1 | EARTH | kfhlib:Screw_Terminal_M4 | J14 |
| 1 | h9bus | Connectors:DB9MD | J1 |
The 30 most common of 34 parts.
Similar boards
- 2 layers26 × 30 mm
Microcontroller
FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop
34 parts1.1kCC-BY-4.0 - 2 layers171.2 × 72.9 mm
Amiga gfxcard old
mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog
34 parts1k - 2 layers53.5 × 62.5 mm
Led matrix
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
34 parts915 - 2 layers45 × 26 mm
- 2 layers41.7 × 25.7 mm
Headphones flex pcb rigid
strangeparts/niubi-headphones
Flexible circuit board design for adding a headphone jack to an iPhone 7
34 parts493MIT - 2 layers18.8 × 16.3 mm
- 2 layers127 × 69.9 mm
Ezcgi
baldengineer/bit-preserve
Project for capturing vintage, classic, aka old computer schematics in KiCad.
34 parts446
Questions
How big is the Cable panel PCB?
It measures 119 × 50 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Cable panel use?
34 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Cable panel KiCad files?
From the c3h9dx/cable_panel repository on GitHub, at the commit this page was made from: the board is cable_panel.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Cable panel design in my own project?
Its repository states no licence, so its author keeps all rights: ask c3h9dx before reusing the design.