2 layers65.8 × 55.9 mm
CatponentX
Absolucy/CatponentX
An internal mod for the original Xbox that provides high-quality component (YPbPr) output
34 parts9
2 layers59.1 × 90.6 mm
Rp2040 keyboard
byrantech/macropad2ZMK oriented embedded RP2040-based 9-key macropad with USB-C, extra GPIO, SWD and select THT components.
- Size
- 59.1 × 90.6 mm
- Copper layers
- 2
- Parts
- 57
- Nets
- 68
- Pads
- 239
- Tracks, vias
- 392, 76
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20230410)
- Created
- 11 May 2023
- Updated
- 11 May 2023
Overview
Rp2040 keyboard is an open-source printed circuit board by byrantech, from the byrantech/macropad repository on GitHub, published under the MIT licence. It is a 2-layer board of 59.1 × 90.6 mm with 57 parts on 68 nets, routed with 392 tracks and 76 vias.
It is built around the RP2040, W25Q32JVSSIQ and AP2112K-3.3, with the WP914IDT among its other parts. Its parts include 16 capacitors, 11 diodes, 11 switches, 10 resistors and 3 ICs. It belongs with the keyboards and input boards and the RP2040 boards of this library.
Main components
4
RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)
W25Q32JVSSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 133MHz 1uA 2.7V~3.6V 20 Years 32Mbit 3ms SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASH
AP2112K-3.3
SOT253.3V 600mA CMOS Low Dropout Linear Regulator with EnableDiodes IncorporatedUncategorised
WP914IDT
插件,3x2mm20mA 2V 4mcd 617nm 627nm Red Red Lens 插件,3x2mm LED Indication - Discrete ROHSKingbrightLED Indication - Discrete
README
README.mdmacropad
Parts
57| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3, C4, C5, C6, C8, C9, C10 |
| 9 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D3, D4, D5, D6, D7, D8, D9, D10, D11 |
| 9 | KEYSW | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW9 |
| 5 | 1uF | Capacitor_SMD:C_0603_1608Metric | C7, C11, C14, C15, C16 |
| 3 | 10K | Resistor_SMD:R_0603_1608Metric | R4, R5, R10 |
| 2 | 1K | Resistor_SMD:R_0603_1608Metric | R6, R9 |
| 2 | 27 | Resistor_SMD:R_0603_1608Metric | R7, R8 |
| 2 | 27pF | Capacitor_SMD:C_0603_1608Metric | C12, C13 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric | R2, R3 |
| 2 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW10, SW11 |
| 1 | 12MHz | Crystal:Crystal_HC49-4H_Vertical | Y1 |
| 1 | 1N5817 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D2 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | Conn_01x05 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J3 |
| 1 | LOGO | logo_silk:ExeterEngineeringClubSmall10x10 | G*** |
| 1 | LOGO | logo_silk:ExeterEngineeringClub | G*** |
| 1 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm_ThermalVias | U1 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | W25Q32JVSS | Package_SO:SOIC-8_5.23x5.23mm_P1.27mm | U3 |
| 1 | WP914IDT | LED_THT:LED_D3.0mm | D1 |
Questions
How big is the Rp2040 keyboard PCB?
It measures 59.1 × 90.6 mm and has 2 copper layers.
What parts does the Rp2040 keyboard use?
57 parts, built around the RP2040, W25Q32JVSSIQ, AP2112K-3.3 and WP914IDT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Rp2040 keyboard KiCad files?
From the byrantech/macropad repository on GitHub, at the commit this page was made from: the board is rp2040_keyboard/rp2040_keyboard.kicad_pcb and its schematic rp2040_keyboard/rp2040_keyboard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Rp2040 keyboard design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers184 × 80.5 mm
Prometheus PCB
TheContrappostoShop/Apollo
Control Board for the Prometheus mSLA Printer.
129 parts13CERN-OHL-S-2.0 - 4 layers98 × 124.4 mm
Piberry.beepy
CarbonComputers/Piberry-12
PiBerry v12 marks the final and most refined revision of the PiBerry handheld Linux terminal. Designed with both form and function in mind, this version brings together the best elements of previous iterations while…
132 parts9MIT - 2 layers84 × 98 mm
- 2 layers151 × 95 mm
Deneme
g210101021/OpenStylophone-RP2040
Overview • Technical Summary • Architecture • Hardware Audit & Remediation • Schematic Subsystems • PCB Layout • Firmware Roadmap • Bill of Materials • Author
143 parts - 4 layers70.6 × 98.6 mm
Custom keyboard
Loredati-svg/RP2040-Macropad
Custom 9-key macropad with 2 rotary encoders, powered by RP2040 – KiCad PCB design
84 parts - 2 layers85 × 56 mm
Chocolate croissant
namnlos-io/chocolate_croissant
It's a Raspberry Pi Pico on a Raspberry Pi B+
21 partsMIT - 4 layers96 × 74 mm
Tellmelight rev a1
qiaoyo/TellMeLight
TellMeLight is designed for ai hardware full-lifetime cycle.
52 parts