2 layers100 × 80 mm
2 layers75.8 × 91.3 mm
- Size
- 75.8 × 91.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 29
- Nets
- 34
- Pads
- 85
- Tracks, vias
- 183, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 26 May 2023
- Updated
- 21 Dec 2023
Overview
WLS5 is an open-source printed circuit board by bwillaert, from the bwillaert/WaterLevelSensor repository on GitHub. It is a 2-layer board of 75.8 × 91.3 mm with 29 parts on 34 nets, routed with 183 tracks and 0 vias.
It is built around the BC547 and IRF9540NS. Its parts include 8 resistors, 4 capacitors, 4 connectors, 2 transistors and 1 switch. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
2Parts
29| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | 100n | Capacitor_THT:C_Disc_D7.0mm_W2.5mm_P5.00mm | C2, C3, C4 |
| 2 | 10K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3, R10 |
| 2 | 1K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4, R6 |
| 2 | 47K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R5, R7 |
| 1 | OLED Display | TerminalBlock:TerminalBlock_Altech_AK300-4_P5.00mm | J4 |
| 1 | 100M | Capacitor_THT:CP_Radial_D8.0mm_P5.00mm | C1 |
| 1 | 220E | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 33K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | Arduino_Nano_Every | Module:Arduino_Nano | A1 |
| 1 | BC547 | Package_TO_SOT_THT:TO-92_Inline | Q1 |
| 1 | Battery | TerminalBlock:TerminalBlock_Altech_AK300-2_P5.00mm | J2 |
| 1 | Calibrate max | Potentiometer_THT:Potentiometer_Bourns_3296W_Vertical | RV1 |
| 1 | DIAGNOSTICS | Button_Switch_THT:SW_PUSH_6mm | SW1 |
| 1 | IN+ | TestPoint:TestPoint_THTPad_2.0x2.0mm_Drill1.0mm | IN+ |
| 1 | IN- | TestPoint:TestPoint_THTPad_2.0x2.0mm_Drill1.0mm | IN- |
| 1 | IRF9540N | Package_TO_SOT_THT:TO-220-3_Vertical | Q2 |
| 1 | PushButton | TerminalBlock:TerminalBlock_Altech_AK300-2_P5.00mm | J3 |
| 1 | Sensor | TerminalBlock:TerminalBlock_Altech_AK300-2_P5.00mm | J1 |
| 1 | UP+ | TestPoint:TestPoint_THTPad_2.0x2.0mm_Drill1.0mm | OUT+ |
| 1 | UP- | TestPoint:TestPoint_THTPad_2.0x2.0mm_Drill1.0mm | OUT- |
More from bwillaert/WaterLevelSensor
2- 2 layers28 × 79 mm
Similar boards
- 2 layers
Weller loddestasjon
kagjerde/Arduino-based-soldering-station
This is an Arduino soldering station using Weller RT soldering tips
34 parts5 - 2 layers199 × 57.5 mm
IROC U Charging
24bec124-sketch/IROC-U-Charging-PMOS
Developed for Team Arrow as part of IRoC-U (ISRO Robotics Challenge - URSC), a national student competition hosted by the Indian Space Research Organization (ISRO).
48 parts1 - 2 layers55 × 485 mm
- 2 layers130 × 95 mm
PlantBreakoutBoard
sirihallqvist/PlantBreakoutBoard
Run the following commands to update and download dependencies.
61 parts1 - 2 layers97 × 67 mm
Soldering iron 936A + t12 compatible
anshchawla521/DIY_T12_iron
This repository conatins all the files for the DIY soldering iron which is compatible with hakko 936 style station and is meant to be used as the replacement PCB for HAKKO 936 style clones.
103 parts - 2 layers271.8 × 114.3 mm
- 2 layers88 × 124.5 mm
EEE383 project
khalidislam377-gif/Bidirectional-H-bridge-motor-driver-with-MCU-and-controlling-buttons-and-knob
`An embedded control architecture and discrete power stage for bidirectional DC motor regulation, featuring finite-state machine logic, real-time telemetry, and a Rev 1.0 hardware post-mortem.`
31 parts - 2 layers126.7 × 163.3 mm
Questions
How big is the WLS5 PCB?
It measures 75.8 × 91.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the WLS5 use?
29 parts, built around the BC547 and IRF9540NS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the WLS5 KiCad files?
From the bwillaert/WaterLevelSensor repository on GitHub, at the commit this page was made from: the board is PCB/WLS5/WLS5/WLS5.kicad_pcb and its schematic PCB/WLS/WLS/WLS.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the WLS5 design in my own project?
Its repository states no licence, so its author keeps all rights: ask bwillaert before reusing the design.