2 layers141.1 × 126.8 mm
Calculator
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
74 parts915
2 layers112.4 × 60.5 mm
5uH LISN
bvernoux/EMC_5uH_LISN45Open Source Hardware Dual 5µH LISN(Line Impedance Stabilization Network)
- Size
- 112.4 × 60.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 74
- Nets
- 29
- Pads
- 148
- Tracks, vias
- 87, 449
- Pours
- 10
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 1 Sep 2021
- Updated
- 14 Sep 2023
Overview
5uH LISN is an open-source printed circuit board by bvernoux, from the bvernoux/EMC_5uH_LISN repository on GitHub, published under the MIT licence. It is a 2-layer board of 112.4 × 60.5 mm with 74 parts on 29 nets, routed with 87 tracks and 449 vias.
Its parts include 32 resistors, 12 capacitors, 12 inductors, 8 connectors and 4 diodes.
README
README.md5µH LISN(Line Impedance Stabilization Network)
Open Source Hardware Dual 5µH DC LISN with 10dB Attenuator and Transient Limiter for Spectrum Analyzer EMC work.
A LISN is a Line Impedance Stabilization Network used in conducted emissions testing.
The AIM of this Dual LISN is to be used for EMC pre-testing with frequency range 30kHz(or lower) to 110MHz(or up to 150MHz or more).
This open source hardware LISN V1 R0 include following features:
-
Designed with fully open source tools like KiCad 5.99 Nightly
-
Improvement in this design:
- Added simulation with LTSpice of the 10dB Attenuator / Transient Filter (with default 1N4148 and BAV99 see Simu dir)
- Modified Supply & DUT "+ GND -" to be separated by 19.06mm for 4mm BANANA JACK for BNC adapter
- Use BAV99 instead of 1N4148W Diodes (improve 10dB Attenuator and Transient Limiter to be flat up to >200MHz)
- Replace Keystone 575-4 by Keystone 575-8 (as the 575-4 was too short)
- Added more via for better thermal transfer/decoupling around capacitors ...
-
Dual LISN in one aluminum box(Hammond 1590B)
- Maximum current: 5A
- Nominal operating voltage range: 0V to 60V DC
- Include 10dB Attenuator and Transient Limiter for each SMA connector to be connected to a Spectrum Analyzer
- Max. 1W / 30dBm if 50°C Temperature raise is allowed
- The Transient limiter is a 9kHz HP filter, which is also a dc block.
This work is heavily based on work from others mainly Jay_Diddy_B & Noy from EEVBLOG forum.
See all links related to the original Dual 5µH LISN:
- https://www.eevblog.com/forum/projects/5uh-lisn-for-spectrum-analyzer-emcemi-work/75/
- https://www.eevblog.com/forum/projects/5uh-lisn-for-spectrum-analyzer-emcemi-work/msg3420102/#msg3420102
Video related to EMC Conducted Emissions / LISN:
- Rohde Schwarz video Understanding LISNs:
- This video explains the design and function of a LISN (line impedance stabilization network) and how LISNs are used in conducted EMC testing.
- https://www.youtube.com/watch?v=QPJzp66Yvzs
- EMC Conducted Emissions: How to connect and set up a LISN:
- In this video Dr. Ali Shirsavar shows how you can connect and set up a LISN ready for pre-compliance testing of EMC conducted emissions.
- https://www.youtube.com/watch?v=28oDdL9RnWM
Parts
74| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 1.1uH | 5uH_LISN:WE-HCI_7030_7040_7050 | L1, L2, L3, L4, L5, L7, L8, L9, L10, L11 |
| 8 | 432R | Resistor_SMD:R_0805_2012Metric | R19, R20, R21, R22, R23, R24, R25, R26 |
| 6 | BANANA_CONN | 5uH_LISN:BANANA_CONN | J3, J4, J5, J6, J7, J8 |
| 4 | 0R | Resistor_SMD:R_1206_3216Metric | R9, R10, R13, R14 |
| 4 | 2.2uF | Capacitor_SMD:C_1210_3225Metric | C5, C6, C7, C8 |
| 4 | 470nF | Capacitor_SMD:C_0805_2012Metric | C11, C12, C13, C14 |
| 4 | MOUNT-PAD-ROUND4.1 | 5uH_LISN:4,1-PAD | H1, H2, H3, H4 |
| 4 | SOT23-DIODEDUAL | 5uH_LISN:SOT23-DIODEDUAL | D1, D2, D3, D4 |
| 2 | 100nF | Capacitor_SMD:C_1206_3216Metric | C15, C16 |
| 2 | 12.1R | Resistor_SMD:R_1206_3216Metric | R7, R8 |
| 2 | 18.2R | Resistor_SMD:R_1206_3216Metric | R27, R28 |
| 2 | 1R | Resistor_SMD:R_1218_3246Metric | R3, R4 |
| 2 | 1mH | 5uH_LISN:COILCRAFT_1008PS | L6, L12 |
| 2 | 22uF | Capacitor_SMD:C_2220_5650Metric | C1, C2 |
| 2 | 243R | Resistor_SMD:R_0805_2012Metric | R11, R12 |
| 2 | 274R | Resistor_SMD:R_0805_2012Metric | R15, R16 |
| 2 | 30.1R | Resistor_SMD:R_1206_3216Metric | R17, R18 |
| 2 | 562R | Resistor_SMD:R_0805_2012Metric | R29, R30 |
| 2 | 619R | Resistor_SMD:R_0805_2012Metric | R31, R32 |
| 2 | 825R | Resistor_SMD:R_0805_2012Metric | R5, R6 |
| 2 | 909R | Resistor_SMD:R_0805_2012Metric | R1, R2 |
| 2 | Conn_SMA | Connector_Coaxial:SMA_Wurth_60312002114503_Vertical | J1, J2 |
| 2 | S30-A75X | 5uH_LISN:S30-A400X | GD1, GD2 |
Similar boards
- 2 layers49 × 44 mm
Simple keeb reuser
CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.
74 parts253GPL-3.0 - 2 layers49 × 49 mm
OSBMS Balancer Rev1 sot323
Teslafly/Dead-OpenBMS-dead
A scalable, open source battery management system
74 parts248 - 2 layers72.4 × 72.4 mm
SerialResonantFilter
profdc9/RFBitBanger
A QRP digital transceiver created from readily available parts for off-the-grid maintenance
74 parts222 - 2 layers58 × 65 mm
- 2 layers110 × 60 mm
Arduino Spot Welder
KaeptnBalu/Arduino_Spot_Welder_V3
This is the Kicad project for V3.1 The Arduino Board was not changed, only the Mosfet Board got a updgrade.
74 parts207GPL-3.0 - 2 layers51.5 × 89 mm
- 2 layers165.7 × 152.4 mm
/Revision%202.0/KiCAD/8-Bit%20CPU%2032k.kicad_pcb.jpg?size=s&soon)
8-Bit CPU 32k
slu4coder/Minimal-UART-Computer-1-2
Legacy: Version 1 and 2 of my TTL-only CPU featuring UART I/O, an expansion port, 512KB SSD at up to 10MHz clock speed
74 parts184
Questions
How big is the 5uH LISN PCB?
It measures 112.4 × 60.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the 5uH LISN use?
74 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the 5uH LISN KiCad files?
From the bvernoux/EMC_5uH_LISN repository on GitHub, at the commit this page was made from: the board is 5uH_LISN.kicad_pcb and its schematic 5uH_LISN.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the 5uH LISN design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).