
Readout splitter
BUNPC/NN22-Technical-Documents
Repository for the storage and dissemination of NN22 technical documents

Repository for the storage and dissemination of NN22 technical documents
Imu adapter is an open-source printed circuit board by BUNPC, from the BUNPC/NN22-Technical-Documents repository on GitHub. It is a 2-layer board of 29 × 21 mm with 4 parts on 6 nets, routed with 29 tracks and 0 vias.
It belongs with the sensors and measurement and interfaces and adapters boards of this library.
This is a splitter board designed to be plug-compatible with the TIGRIS one. See top-level README for some more details.
Connector from readout system is a Samtec SHF-117-01-L-D-SM shrouded 34-pin header with 0.05" pitch.
Detector connector is Samtec SFMC-118-02-S-D 36-pin socket strip with 0.05" pitch. Note that the TIGRIS schematic and layout use mirrored pinout for the detector connector (odd-even swap).
Designed LDOs:
The negative adjustable regulator should output -15.0V with the resistors shown. There is an additional filter in the design (R+C on front side) which can (according to the datasheet) reduce the noise a bit in the negative regulator. There is no such provision for the positive regulator.
This is a 4-layer board and a bit dense. There were a few compromises made in routing with shared vias, etc but hopefully it will be OK.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | MountingHole | MountingHole:MountingHole_2.5mm_Pad | H1, H2 |
| 1 | 1mm_SIP | Connector_PinHeader_1.00mm:PinHeader_1x06_P1.00mm_Vertical | J2 |
| 1 | 2x3_0.1in | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J1 |

BUNPC/NN22-Technical-Documents
Repository for the storage and dissemination of NN22 technical documents

BUNPC/NN22-Technical-Documents
Repository for the storage and dissemination of NN22 technical documents
%20imu-splitter/imu-splitter.kicad_pcb.jpg?size=s&soon)
BUNPC/NN22-Technical-Documents
Repository for the storage and dissemination of NN22 technical documents
%20imu-board/imu-board.kicad_pcb.jpg?size=s&soon)
BUNPC/NN22-Technical-Documents
Repository for the storage and dissemination of NN22 technical documents

BUNPC/NN22-Technical-Documents
Repository for the storage and dissemination of NN22 technical documents

BUNPC/NN22-Technical-Documents
Repository for the storage and dissemination of NN22 technical documents

BUNPC/NN22-Technical-Documents
Repository for the storage and dissemination of NN22 technical documents

joypad-ai/joypad-os
Universal controller firmware for building adapters, dongles, and custom controllers.


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

tardate/LittleArduinoProjects
a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!

drandyhaas/KiCadRoutingTools
A set of Python/Rust tools to aid routing in KiCad

osy/XG_Mobile_Station
Open source eGPU dock for ROG Ally and ROG Flow

Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

NVNTLabs/switch2-SDEX2M2
Micro SD Express to M.2 NVME Adapter for Nintendo Switch 2
It measures 29 × 21 mm and has 2 copper layers, 1.6 mm thick.
4 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the BUNPC/NN22-Technical-Documents repository on GitHub, at the commit this page was made from: the board is IMU-bundle/ninjanirs-imu-main/KiCAD/imu-adapter/imu-adapter.kicad_pcb and its schematic Hardware Main/Electronics/Detector Electronics/DET_Optode/flex-VEMD/flex-VEMD.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask BUNPC before reusing the design.