
Controller
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

Danalock is an open-source printed circuit board by bullestock, from the bullestock/danalock-wired repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 25.4 × 31.6 mm with 11 parts on 24 nets, routed with 91 tracks and 7 vias.
Its parts include 3 resistors, 3 connectors, 2 capacitors, 2 ICs and 1 diode. It belongs with the ESP32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 100 | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | 100n | Capacitor_SMD:C_0603_1608Metric | C1, C2 |
| 1 | 220 | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | Conn_01x02 | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J1 |
| 1 | Conn_01x03 | Connector_PinHeader_2.00mm:PinHeader_1x03_P2.00mm_Vertical | J3 |
| 1 | Conn_01x07 | Connector_PinHeader_2.00mm:PinHeader_1x07_P2.00mm_Vertical | J2 |
| 1 | DSN-MINI-360 | hal9k:DSN-MINI-360 | U2 |
| 1 | ESP32mini_shield_inner | hal9k:ESP32mini_shield_inner | U1 |
| 1 | LED | LED_THT:LED_Rectangular_W5.0mm_H2.0mm | D1 |

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards


FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!


tardate/LittleArduinoProjects
a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!

basilfx/TRADFRI-Hacking
Hacking IKEA TRÅDFRI products, such as light bulbs, window blinds and other accessories.
It measures 25.4 × 31.6 mm and has 2 copper layers, 1.6 mm thick.
11 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the bullestock/danalock-wired repository on GitHub, at the commit this page was made from: the board is kicad/danalock.kicad_pcb and its schematic kicad/danalock.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).