

Peripherals
- Size
- 76.5 × 61.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 42
- Nets
- 43
- Pads
- 156
- Tracks, vias
- 309, 20
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 29 Jul 2016
- Updated
- 27 Oct 2026
Overview
Peripherals is an open-source printed circuit board by bullestock, from the bullestock/chairbot repository on GitHub. It is a 2-layer board of 76.5 × 61.8 mm with 42 parts on 43 nets, routed with 309 tracks and 20 vias.
It is built around the IRFR5505TRPBF, MMBT3904 and SS34. Its parts include 10 connectors, 8 resistors, 8 transistors, 7 capacitors and 4 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
3IRFR5505TRPBF
TO-252-55℃~+150℃ 1 P-Channel 110mΩ@10V 120pF 18A 270pF 32nC@10V 4V 55V 57W 650pF P-Channel TO-252 MOSFETs ROHSInfineon TechnologiesMOSFETsMMBT3904
SOT-23-55℃~+150℃ 1 NPN 100 100nA 200mA 200mW 300MHz 300mV 40V 6V NPN SOT-23 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)SS34
SMA(DO-214AC)-55℃~+125℃ 3A 40V 500uA@40V 550mV@3A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky Diodes
Parts
42| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 1u | Capacitor_SMD:C_0805_2012Metric | C3, C4, C5, C6, C9 |
| 5 | JST XH | Connector_JST:JST_XH_B02B-XH-A_1x02_P2.50mm_Vertical | J3, J5, J6, J7, J8 |
| 4 | 10K | Resistor_SMD:R_0603_1608Metric | R2, R4, R6, R8 |
| 4 | 1k | Resistor_SMD:R_0603_1608Metric | R1, R3, R5, R7 |
| 4 | IRFR5505TRPBF | Package_TO_SOT_SMD:TO-252-3_TabPin2 | Q2, Q4, Q6, Q8 |
| 4 | MMBT3904 | Package_TO_SOT_SMD:SOT-23 | Q1, Q3, Q5, Q7 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 4 | SS34 | Diode_SMD:D_SMB | D1, D2, D3, D4 |
| 2 | 100u | Capacitor_SMD:CP_Elec_10x10 | C1, C2 |
| 2 | Conn_01x08 | Connector_JST:JST_XH_B08B-XH-A_1x08_P2.50mm_Vertical | J4, J9 |
| 2 | JST XH | Connector_JST:JST_XH_B05B-XH-A_1x05_P2.50mm_Vertical | J1, J2 |
| 1 | Arduino_Nano_v3.x | Module:Arduino_Nano | U1 |
| 1 | Conn_01x04 | Connector_JST:JST_XH_B04B-XH-A_1x04_P2.50mm_Vertical | J10 |
More from bullestock/chairbot
3- 2 layers66.9 × 100 mm

- 2 layers14.7 × 31.5 mm

- 2 layers66 × 27.9 mm

Similar boards
- 2 layers53.5 × 101.8 mm

Sony scopeman
lucysrausch/sony-scopeman
Hardware Design files of a replacement mainboard for the Sony Watchman FD-10. This turns it into a bluetooth and WiFi-enabled vector display.
135 parts69 - 2 layers155 × 70 mm

Payphone v1
sdylewski/Analog-Redial
A circuit board for old telephones to come back to life. Plug one or two phones in, and you can call the other phone, use bluetooth, connect to others via voip, and do a variety of other things with a plain old rotary…
137 parts46 - 2 layers148.6 × 192.2 mm

Badge
NuttyShell/NuttyBadge
NuttyBadge: A NuttyShell crafted multi-tool. Opensourced Hardawre and Software
169 parts31GPL-3.0 - 2 layers

- 2 layers77.2 × 67.9 mm

Transistor tester
vitaliy-bobrov/avr-transistor-tester
Component/Transistor tester based on famous AVR Transistor Tester
66 parts12 - 2 layers141.8 × 151.3 mm

- 2 layers128 × 70.5 mm

- 4 layers53 × 85 mm

Questions
How big is the Peripherals PCB?
It measures 76.5 × 61.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Peripherals use?
42 parts, built around the IRFR5505TRPBF, MMBT3904 and SS34. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Peripherals KiCad files?
From the bullestock/chairbot repository on GitHub, at the commit this page was made from: the board is pcb/peripherals/peripherals.kicad_pcb and its schematic pcb/chairbot/chairbot.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Peripherals design in my own project?
Its repository states no licence, so its author keeps all rights: ask bullestock before reusing the design.