6 layers29 × 51.5 mm
Bugg led r4
bugg-resources/bugg-hardware-led
This repository contains the KiCad source files for the LED PCB of the Bugg recording device.
22 parts
2 layers29 × 51.5 mm
Safeproject led r3
bugg-resources/bugg-hardware-ledThis repository contains the KiCad source files for the LED PCB of the Bugg recording device.
- Size
- 29 × 51.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 22
- Nets
- 27
- Pads
- 76
- Tracks, vias
- 152, 25
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20210424)
- Created
- 23 Nov 2022
- Updated
- 13 Dec 2023
Overview
Safeproject led r3 is an open-source printed circuit board by bugg-resources, from the bugg-resources/bugg-hardware-led repository on GitHub. It is a 2-layer board of 29 × 51.5 mm with 22 parts on 27 nets, routed with 152 tracks and 25 vias.
It is built around the IN-P32TATRGB and FH12A-20S-0.5SH(55). Its parts include 9 resistors, 3 diodes and 2 connectors.
Main components
2IN-P32TATRGB
PLCC-4-30℃~+85℃ 1.9mm 120° 2.8mm 3.5mm B:300mcd、R:280mcd、G:900mcd B:470nm、R:630nm、G:530nm Common Anode G:525nm、B:468nm、R:624nm R:2.2V~2.6V、G:3.2V~3.6V、B:3.2V~3.6V R:20mA、G:20mA、B:20mA R:70mW、G:90mW、B:90mW Water Clear PLCC-4 RGB LEDs ROHSInoluxRGB LEDs
FH12A-20S-0.5SH(55)
SMD,P=0.5mm,卧贴-40℃~+85℃ 0.3mm 0.5mm 20P 2mm Gold Hinged Lid Phosphor bronze Surface Mount, Right Angle Top Contact SMD,P=0.5mm,卧贴 FFC, FPC (Flat Flexible) Connector Assemblies ROHSHirose ElectricFFC, FPC (Flat Flexible) Connector Assemblies
README
README.md
bugg-hardware-led
This repository contains the KiCad source files for the LED PCB of the Bugg recording device.
For a full overview of the design of the Bugg recording device and practical assembly instructions please refer to the Bugg hardware handover document.
Electronics overview
BoM
Parts
22| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 22R | Resistor_SMD:R_0603_1608Metric | R201, R202, R203, R204, R205, R206, R207, R208, R209 |
| 4 | MountingHole_3.2mm_M3_DIN965 | MountingHole:MountingHole_3.2mm_M3_DIN965 | H201, H202, H203, H204 |
| 3 | IN-P32TATRGB | LED_SMD:LED_Avago_PLCC4_3.2x2.8mm_CW | LED201, LED202, LED203 |
| 2 | Fiducial | Fiducial:Fiducial_1mm_Mask2mm | FID1, FID2 |
| 2 | MountingHole | H205, H206 | |
| 1 | 2314844-8 | jeffmakes-footprints:PinSocket_2x04_P2.00mm_Vertical_SMD_Bottom_or_Top_Entry_AMPMODU | J201 |
| 1 | FH12A-20S-0.5SH | Connector_FFC-FPC:Hirose_FH12-20S-0.5SH_1x20-1MP_P0.50mm_Horizontal | J202 |
More from bugg-resources/bugg-hardware-led
4- 2 layers29 × 51.5 mm
Bugg led r5
bugg-resources/bugg-hardware-led
This repository contains the KiCad source files for the LED PCB of the Bugg recording device.
22 parts - 2 layers29 × 51.5 mm
Safeproject led r2
bugg-resources/bugg-hardware-led
This repository contains the KiCad source files for the LED PCB of the Bugg recording device.
20 parts - 2 layers29 × 46.5 mm
Safeproject led r1
bugg-resources/bugg-hardware-led
This repository contains the KiCad source files for the LED PCB of the Bugg recording device.
18 parts
Similar boards
- 4 layers57.3 × 109 mm
Safeproject main r3
bugg-resources/bugg-hardware-main
This repository contains the KiCad source files for the main PCB of the Bugg recording device.
173 parts2 - 4 layers29.8 × 38.1 mm
- 2 layers158 × 11 mm
Daylight Matchstick
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
22 parts1.1kGPL-3.0 - 2 layers57 × 65 mm
Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
22 parts1kGPL-3.0 - 2 layers81 × 57.2 mm
RP2040-Macropad
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
22 parts915 - 2 layers54.6 × 70.9 mm
BeagleLogic Cape
abhishek-kakkar/BeagleLogic
A Software Suite that implements a logic analyzer with the PRU on the BeagleBone / BeagleBone Black.
22 parts479GPL-3.0 - 2 layers66.4 × 24.5 mm
Connecting piece
Chrismettal/flipper-zero-backpacks
Backpack-style addon boards for the Flipper Zero!
22 parts456 - 2 layers51 × 70 mm
Questions
How big is the Safeproject led r3 PCB?
It measures 29 × 51.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Safeproject led r3 use?
22 parts, built around the IN-P32TATRGB and FH12A-20S-0.5SH(55). The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Safeproject led r3 KiCad files?
From the bugg-resources/bugg-hardware-led repository on GitHub, at the commit this page was made from: the board is r3/src/safeproject-led-r3.kicad_pcb and its schematic r1/src/safeproject-led-r1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Safeproject led r3 design in my own project?
Its repository states no licence, so its author keeps all rights: ask bugg-resources before reusing the design.