Skip to the content
2 layers27 × 12 mmUsb conn, the printed circuit board in 3D

Various usb firmware downloader boards

Size
27 × 12 mm
Copper layers
2
Thickness
1.6 mm
Parts
9
Nets
9
Pads
53
Tracks, vias
109, 0
Pours
1
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
15 Aug 2024
Updated
31 Oct 2024

Overview

Usb conn is an open-source printed circuit board by buganini, from the buganini/usb-dl repository on GitHub. It is a 2-layer board of 27 × 12 mm with 9 parts on 9 nets, routed with 109 tracks and 0 vias.

It is built around the SPX3819M5-L-3-3. Its parts include 6 connectors, 2 resistors and 1 IC.

Main components

1

README

README.md

USB

text
Application: ESP32-C3
Pinouts: 2.54 2.0 1.27 1.0
* G: Gnd
* +: USB D+
* -: USB D-
* V: 3.3v or 5v output

ESP32

text
Application: ESP32
Pinouts: 2.54 2.0
* En
* IO0
* Gnd
* RX
* TX
* V: 3.3v or 5v output

Parts

9
QtyValueFootprintReferences
25.1kResistor_SMD:R_0603_1608MetricR1, R2
1Conn_01x04_PinConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ1
1Conn_01x04_PinConnector_PinHeader_2.00mm:PinHeader_1x04_P2.00mm_VerticalJ2
1Conn_01x04_PinConnector_PinHeader_1.27mm:PinHeader_1x04_P1.27mm_VerticalJ4
1Conn_01x04_PinConnector_PinHeader_1.00mm:PinHeader_1x04_P1.00mm_VerticalJ6
1Conn_01x06_PinConnector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_VerticalJ5
1SPX3819M5-L-3-3Package_TO_SOT_SMD:SOT-23-5U1
1USB_C_Receptacle_USB2.0_14PConnector_USB:USB_C_Receptacle_XKB_U262-16XN-4BVC11J3

More from buganini/usb-dl

1
  • 2 layers35 × 17 mmEsp32, the printed circuit board in 3D

    Esp32

    buganini/usb-dl

    Various usb firmware downloader boards

    22 parts

Similar boards

  • 2 layers30 × 60 mmSplitFlapDriverATtiny1616V4, the printed circuit board in 3D

    SplitFlapDriverATtiny1616V4

    adamgmakes/SplitFlapDisplay

    A modular, 3D-printed split-flap display controllable over RS485 from a Raspberry Pi. Each module holds 64 characters and modules can be chained together to build a display of any width.

    25 parts190
  • 4 layers35.6 × 17.8 mmLofive, the printed circuit board in 3D

    Lofive

    mwelling/lofive

    RISC-V microcontroller board based on SiFive FE310.

    35 parts161
  • 2 layers25.6 × 23 mmBreakout, the printed circuit board in 3D

    Breakout

    skorokithakis/tiny-ESP8266-breakout

    A very small and basic ESP8266 breakout board

    12 parts115BSD-2-Clause
  • 4 layers15.2 × 19 mmOpenlager, the printed circuit board in 3D

    Openlager

    d-ronin/openlager

    STM32F4 based logging dongle for HIGH RATE logging

    30 parts111
  • 2 layers31.4 × 20.6 mmWindow sensor V5, the printed circuit board in 3D

    Window sensor V5

    gadjet/Window-Door-sensor-Version-5

    Version 5 of the Window/Door sensor project this time with ultra low current consumption

    32 parts70GPL-2.0
  • 6 layers76 × 46.4 mmRp2350 driver, the printed circuit board in 3D

    Rp2350 driver

    sequoia-hope/rp2350-motor-controller

    An RP2350 based brushless motor controller

    291 parts39
  • 2 layers120 × 66 mmIo daughterboard, the printed circuit board in 3D

    Io daughterboard

    kbob/MinimumViableSynth

    A virtual analog synthesizer with lots of knobs and buttons.

    136 parts28GPL-3.0
  • 2 layers41.3 × 44.5 mmPCMCIA SRAM, the printed circuit board in 3D

    PCMCIA SRAM

    f1ac0/PCMCIA-SRAM

    4MB PCMCIA SRAM for Amiga 600 and 1200

    23 parts26

Questions

How big is the Usb conn PCB?

It measures 27 × 12 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Usb conn use?

9 parts, built around the SPX3819M5-L-3-3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Usb conn KiCad files?

From the buganini/usb-dl repository on GitHub, at the commit this page was made from: the board is usb/usb-conn.kicad_pcb and its schematic esp32/esp32.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Usb conn design in my own project?

Its repository states no licence, so its author keeps all rights: ask buganini before reusing the design.