2 layers44.1 × 57.5 mm
4 layers44.1 × 57.5 mm
Design files TM
bu-gsLab/module_thermal_mockup2ETL thermal mockup of a module
- Size
- 44.1 × 57.5 mm
- Copper layers
- 4
- Thickness
- 1.2 mm
- Parts
- 84
- Nets
- 90
- Pads
- 250
- Tracks, vias
- 770, 131
- Pours
- 371
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 18 Mar 2024
- Updated
- 26 Jun 2026
Overview
Design files TM is an open-source printed circuit board by bu-gsLab, from the bu-gsLab/module_thermal_mockup repository on GitHub. It is a 4-layer board of 44.1 × 57.5 mm with 84 parts on 90 nets, routed with 770 tracks and 131 vias.
Its parts include 13 resistors, 8 ICs, 7 capacitors, 1 connector and 1 crystal.
README
README.mdDescription
Project Structure
.
├── README.md
├── control-board
│ ├── fimware_CB
│ ├── hardware
│ └── software_CB
├── database
│ └── ...
├── module_pcb_thermal_mockup
│ ├── firmware_TM
│ ├── hardware
│ └── software_TM
├── other
│ ├── README.md
│ └── TMP121-test
└── ssh_tunnel.pngParts
84| Qty | Value | Footprint | References |
|---|---|---|---|
| 48 | TestPoint | TestPoint:TestPoint_Pad_1.0x1.0mm | 5V, E1, E2, E3, E4, GND, L1, L2, L3, L4, T1:1, T1:2, T1:3, T1:4, T1:5, T1:6 +32 |
| 8 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R6, R7, R8, R9, R10, R11, R12 |
| 4 | 0.1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C6, C7, C8 |
| 4 | ETROC_bumpbond_dummy | ETL:ETROC2_bumpbonds | U1, U2, U3, U4 |
| 3 | TMP121 | Package_TO_SOT_SMD:SOT-23-6 | U7, U8, U9 |
| 2 | 12.6 | unl_silab:ETROC_Heater_Serpantine | R1, R2 |
| 2 | 33pF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4, C5 |
| 2 | 40k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3 |
| 1 | 1M | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R14 |
| 1 | 32kHz | Crystal:Crystal_SMD_3215-2Pin_3.2x1.5mm | Y1 |
| 1 | AD77x8 | Package_SO:SOIC-28W_7.5x18.7mm_P1.27mm | U5 |
| 1 | Conn_02x06_Counter_Clockwise | Connector_PinHeader_2.54mm:PinHeader_2x06_P2.54mm_Vertical_SMD | J1 |
The 78 most common of 84 parts.
More from bu-gsLab/module_thermal_mockup
2- 4 layers68.6 × 53.3 mm
Similar boards
- 4 layers95 × 95 mm
Esp32 wled controller
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
84 parts915 - 4 layers160 × 100 mm
Rosco m68k
rosco-m68k/rosco_m68k
Design, documentation and software for the Really Old School Computer (M68K)
84 parts200 - 4 layers46.5 × 40 mm
- 4 layers58.2 × 78 mm
FujiNet INTV Rev0
FujiNetWIFI/fujinet-hardware
Schematics and design files for FujiNet hardware
84 parts142 - 4 layers38.1 × 17.8 mm
1bitsy
1Bitsy/1bitsy-hardware
Small breadboard friendly STM32 (eventually other mcu's too) eval boards with exposed JTAG and SWD for the use with Black Magic Probe and others!
84 parts66 - 4 layers45.8 × 69.5 mm
Microsynkie
mirdej/synkie
The Synkie is a modular open source analog video processor, developed by Michael Egger, Max Egger and Flo Kaufmann
84 parts47 - 4 layers49.8 × 25.5 mm
Corevus toolboard
calithameridi/corevus
High-flexibility, low-cost mechatronics controller for 3D printers
84 parts25 - 4 layers47.1 × 33 mm
GamePad I2S audio
intergalaktik/Extension_Boards_for_Olimex_GateMate
Simple extension boards for Olimex GateMate FPGA Board
84 parts20
Questions
How big is the Design files TM PCB?
It measures 44.1 × 57.5 mm and has 4 copper layers, 1.2 mm thick.
What parts does the Design files TM use?
84 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Design files TM KiCad files?
From the bu-gsLab/module_thermal_mockup repository on GitHub, at the commit this page was made from: the board is module_pcb_thermal_mockup/hardware/design-files_TM/design-files_TM.kicad_pcb and its schematic bumpbonds_mockup/hardware/design-files_BM/design-files_BM.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Design files TM design in my own project?
Its repository states no licence, so its author keeps all rights: ask bu-gsLab before reusing the design.