
ZArduino
zmaker/arduino_cookbook
gli sketch del nuovo progetto Arduino Cookbook e dei video di YouTube

PCB to get my stock pile of 328s used as Arduino
MyArduino is an open-source printed circuit board by bstrobel, from the bstrobel/MyArduino repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 56 × 69.3 mm with 32 parts on 30 nets, routed with 297 tracks and 5 vias.
It is built around the ATMEGA328P-PU. Its parts include 11 connectors, 9 capacitors, 4 resistors, 3 ICs and 2 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.
PCB to get my stock pile of 328s used as Arduino
Idee: Kleines generisches PCB bei Elecrow bestellten, um meine 328 einfach verbauen oder auf Steckbrett verwenden zu können.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole:MountingHole_2.7mm_M2.5_DIN965_Pad | J8, J9, J10, J11 | |
| 3 | 100n | Capacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mm | C2, C4, C6 |
| 2 | 22p | Capacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mm | C8, C9 |
| 2 | 470R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R3 |
| 2 | LED | LED_THT:LED_D3.0mm | D1, D2 |
| 1 | 100u | Capacitor_THT:CP_Radial_D7.5mm_P2.50mm | C1 |
| 1 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4 |
| 1 | 10n | Capacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mm | C7 |
| 1 | 10u | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C3 |
| 1 | 16MHz | Crystal:Crystal_HC18-U_Vertical | Y1 |
| 1 | 22u | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C5 |
| 1 | 240R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 5k | Potentiometer_THT:Potentiometer_Bourns_3296P_Horizontal | RV1 |
| 1 | AD | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J6 |
| 1 | ATmega328P-PU | Package_DIP:DIP-28_W7.62mm_Socket | U3 |
| 1 | GND | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | IOH | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J5 |
| 1 | IOL | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J7 |
| 1 | ISP | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J2 |
| 1 | LM317_TO220 | Package_TO_SOT_THT:TO-220-3_Vertical | U2 |
| 1 | MCP1700-5002E_TO92 | Package_TO_SOT_THT:TO-92_Inline | U1 |
| 1 | PWR | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW1 |
| 1 | VCC | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3 |

zmaker/arduino_cookbook
gli sketch del nuovo progetto Arduino Cookbook e dei video di YouTube

coseyfannitutti/discipad
17-key numpad assembled with only through hole components, including usb type-c

matthewcieplak/super-sixteen
Code and schematics for the Super Sixteen Eurorack sequencer

coseyfannitutti/romeo
Staggered 40% keyboard pcb that can be assembled with only through hole components, including USB Type-C

mattybrad/drumkid
Version 4 was the first successful working design, with full code, schematics, Gerbers, etc available on GitHub.


leomil72/LM80C
A Z80-based homebrew computer withTMS9918, AY-3-8910, Z80 CTC, Z80 PIO, and Z80 SIO

It measures 56 × 69.3 mm and has 2 copper layers, 1.6 mm thick.
32 parts, built around the ATMEGA328P-PU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the bstrobel/MyArduino repository on GitHub, at the commit this page was made from: the board is MyArduino.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).