Skip to the content
2 layers56 × 69.3 mmMyArduino, the printed circuit board in 3D

PCB to get my stock pile of 328s used as Arduino

Size
56 × 69.3 mm
Copper layers
2
Thickness
1.6 mm
Parts
32
Nets
30
Pads
116
Tracks, vias
297, 5
Pours
1
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
21 Jul 2019
Updated
21 Jul 2019

Overview

MyArduino is an open-source printed circuit board by bstrobel, from the bstrobel/MyArduino repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 56 × 69.3 mm with 32 parts on 30 nets, routed with 297 tracks and 5 vias.

It is built around the ATMEGA328P-PU. Its parts include 11 connectors, 9 capacitors, 4 resistors, 3 ICs and 2 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

1

README

README.md

MyArduino

PCB to get my stock pile of 328s used as Arduino

Idee: Kleines generisches PCB bei Elecrow bestellten, um meine 328 einfach verbauen oder auf Steckbrett verwenden zu können.

  • Größe um in direkt in kleines, günstiges Gehäuse verbaut werden zu können, das es bei Reichelt oder Conrad gibt
    • Gehäuse bei R heraussuchen, wenn Mindestgröße feststeht
  • Pin Header mit Belegung und Bezeichnung wie bei Arduino, aber nicht notwendigerweise so angeordnet, dass Arduino Shields darauf passen. Aber eventuell so, dass Einsatz kleiner Shields für SD-Karten oder Sensoren nicht blockiert wird.
  • Pin Header so anordnen, dass Verwendung auf Steckbrett möglich ist
  • Stromversorgung:
    • Optionale Bestückung mit LM317 inkl. Justier-Rs und Block-Cs
    • auch MCP1702 (LDO 5v) Regler -> Achtung: nicht pinkompatibel mit 78L05!
    • Stromversorgungsheader für direkte Versorgung oder an Regler-IC
  • ICP Header mit Standardbelegung
  • Resettaster
  • Arduino-LED an Port 13 vorsehen, muss ja nicht bestückt werden.
  • Quarzbestückung vorsehen
    • aber Ports auch herausführen
  • AREF-Cap: https://www.avrfreaks.net/forum/capacitor-aref-atmega328

Parts

32
QtyValueFootprintReferences
4 MountingHole:MountingHole_2.7mm_M2.5_DIN965_PadJ8, J9, J10, J11
3100nCapacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mmC2, C4, C6
222pCapacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mmC8, C9
2470RResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR2, R3
2LEDLED_THT:LED_D3.0mmD1, D2
1100uCapacitor_THT:CP_Radial_D7.5mm_P2.50mmC1
110kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR4
110nCapacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mmC7
110uCapacitor_THT:CP_Radial_D6.3mm_P2.50mmC3
116MHzCrystal:Crystal_HC18-U_VerticalY1
122uCapacitor_THT:CP_Radial_D6.3mm_P2.50mmC5
1240RResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR1
15kPotentiometer_THT:Potentiometer_Bourns_3296P_HorizontalRV1
1ADConnector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_VerticalJ6
1ATmega328P-PUPackage_DIP:DIP-28_W7.62mm_SocketU3
1GNDConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ4
1IOHConnector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_VerticalJ5
1IOLConnector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_VerticalJ7
1ISPConnector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_VerticalJ2
1LM317_TO220Package_TO_SOT_THT:TO-220-3_VerticalU2
1MCP1700-5002E_TO92Package_TO_SOT_THT:TO-92_InlineU1
1PWRConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ1
1SW_PushButton_Switch_THT:SW_PUSH_6mm_H5mmSW1
1VCCConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ3

Similar boards

  • 2 layers68.8 × 53.6 mmZArduino, the printed circuit board in 3D

    ZArduino

    zmaker/arduino_cookbook

    gli sketch del nuovo progetto Arduino Cookbook e dei video di YouTube

    46 parts269
  • 2 layers76.3 × 122.8 mmDiscipad pcb, the printed circuit board in 3D

    Discipad pcb

    coseyfannitutti/discipad

    17-key numpad assembled with only through hole components, including usb type-c

    63 parts221GPL-3.0
  • 2 layers111.3 × 106.4 mmSuper Sixteen v1, the printed circuit board in 3D

    Super Sixteen v1

    matthewcieplak/super-sixteen

    Code and schematics for the Super Sixteen Eurorack sequencer

    141 parts171
  • 2 layers247.6 × 99.2 mmRomeo pcb, the printed circuit board in 3D

    Romeo pcb

    coseyfannitutti/romeo

    Staggered 40% keyboard pcb that can be assembled with only through hole components, including USB Type-C

    138 parts148GPL-3.0
  • 2 layers90 × 140 mmDrumkid, the printed circuit board in 3D

    Drumkid

    mattybrad/drumkid

    Version 4 was the first successful working design, with full code, schematics, Gerbers, etc available on GitHub.

    70 parts137
  • 2 layers238.1 × 375.5 mmFramework, the printed circuit board in 3D

    Framework

    stevennguyen/framework

    Ortholinear keyboard with a knob

    197 parts131
  • 2 layersLM80C R6, the printed circuit board in 3D

    LM80C R6

    leomil72/LM80C

    A Z80-based homebrew computer withTMS9918, AY-3-8910, Z80 CTC, Z80 PIO, and Z80 SIO

    153 parts123GPL-3.0
  • 2 layers145.3 × 44.5 mmScout, the printed circuit board in 3D

    Scout

    oskitone/scout

    3D-printed, Arduino-compatible, 17-key mono synth. Squeeeee!

    48 parts114

Questions

How big is the MyArduino PCB?

It measures 56 × 69.3 mm and has 2 copper layers, 1.6 mm thick.

What parts does the MyArduino use?

32 parts, built around the ATMEGA328P-PU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the MyArduino KiCad files?

From the bstrobel/MyArduino repository on GitHub, at the commit this page was made from: the board is MyArduino.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the MyArduino design in my own project?

Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).