
CommonSense
antsouchlos/commonsense-hw
A BLE-based PCB for measuring humidity and temperature

Stm32simh is an open-source printed circuit board by bson, from the bson/stm32simh repository on GitHub, published under the MIT licence. It is a 4-layer board of 80 × 80 mm with 96 parts on 172 nets, routed with 925 tracks and 231 vias.
It is built around the STM32H753ZIT6, CP2102N-EK and IS61WV204816BLL-10TLI, with the LAN8720A-CP, APTD1608LZGCK and MMZ1005D330CTD25 among its other parts. Its parts include 39 capacitors, 27 resistors, 7 diodes, 5 ICs and 5 connectors. It belongs with the STM32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 19 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C1, C2, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C21, C30, C31, C33 +3 |
| 11 | 15k | Resistor_SMD:R_0402_1005Metric | R1, R2, R3, R4, R5, R6, R7, R8, R9, R13, R23 |
| 7 | 100 | Resistor_SMD:R_0402_1005Metric | R19, R20, R24, R25, R26, R27, R28 |
| 5 | GRN | Diode_SMD:D_0603_1608Metric | D2, D3, D5, D6, D7 |
| 4 | 49.9 1/4W+ | Resistor_SMD:R_0805_2012Metric | R15, R16, R17, R18 |
| 4 | MountingHole | MountingHole:MountingHole_2.2mm_M2_ISO14580_Pad | H1, H2, H3, H4 |
| 3 | 4.7uF | Capacitor_SMD:C_0805_2012Metric | C6, C20, C32 |
| 2 | 0.1µF | Capacitor_SMD:C_0402_1005Metric | C26, C27 |
| 2 | 10µF 16V | Capacitor_SMD:C_0603_1608Metric | C29, C36 |
| 2 | 1pF | Capacitor_SMD:C_0402_1005Metric | C7, C8 |
| 2 | 1uF | Capacitor_SMD:C_0402_1005Metric | C22, C35 |
| 2 | 2.2uF | Capacitor_SMD:C_0603_1608Metric | C23, C24 |
| 2 | 33Ω @ 100MHz 400mA 240mΩ | Inductor_SMD:L_0402_1005Metric | L1, L2 |
| 2 | 34pF | Capacitor_SMD:C_0402_1005Metric | C38, C39 |
| 2 | 4.7µF | Capacitor_SMD:C_0805_2012Metric | C25, C28 |
| 2 | 5.1k | Resistor_SMD:R_0402_1005Metric | R11, R12 |
| 1 | 12.1k | Resistor_SMD:R_0402_1005Metric | R14 |
| 1 | 2.2µH 70MHz+ 1A+ 0.5Ω- | Inductor_SMD:L_Taiyo-Yuden_NR-24xx | L3 |
| 1 | 22µF 25V | Capacitor_SMD:C_0805_2012Metric | C37 |
| 1 | 25MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y3 |
| 1 | 30V 100mA | Diode_SMD:D_0603_1608Metric | D1 |
| 1 | 33k | Resistor_SMD:R_0402_1005Metric | R21 |
| 1 | 470pF | Capacitor_SMD:C_0402_1005Metric | C34 |
| 1 | 47k | Resistor_SMD:R_0402_1005Metric | R22 |
| 1 | 500nF | Capacitor_SMD:C_0402_1005Metric | C3 |
| 1 | ABS06W-32.768kHz-D-2-T DISC | Crystal:Crystal_SMD_2012-2Pin_2.0x1.2mm | Y1 |
| 1 | ARM JTAG | Package_SO:SOIC-10_3.9x4.9mm_P1mm | J2 |
| 1 | CP2102N | CP2102N-QFN:CP2102N-QFN20 | U4 |
| 1 | CR2032 | Battery:BatteryHolder_Keystone_1060_1x2032 | V1 |
| 1 | IS61WV204816BLL-10TLI | SOP50P2000X120-48N:SOP50P2000X120-48N | U2 |
| 1 | LAN8720A | Package_DFN_QFN:VQFN-24-1EP_4x4mm_P0.5mm_EP2.5x2.5mm | U3 |
| 1 | LM3671 3.3V | Package_TO_SOT_SMD:TSOT-23-5 | U5 |
| 1 | Micro_SD_Card_Det_Hirose_DM3AT | Connector_Card:microSD_HC_Hirose_DM3AT-SF-PEJM5 | J1 |
| 1 | NetTie_2 | NetTie:NetTie-2_SMD_Pad0.5mm | NT1 |
| 1 | OSHW | Symbol:OSHW-Logo_7.5x8mm_SilkScreen | H6 |
| 1 | RESET | Button_Switch_SMD:SW_SPST_CK_RS282G05A3 | SW1 |
| 1 | RJ45 | Connector_RJ:RJ45_Amphenol_RJMG1BD3B8K1ANR | J5 |
| 1 | SERIAL1 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | SP0503BAHT | Package_TO_SOT_SMD:SOT-143 | D4 |
| 1 | STM32H753ZIT6 | Package_QFP:LQFP-144_20x20mm_P0.5mm | U1 |
| 1 | USB_C_USB2.0_16P | Connector_USB:USB_C_Receptacle_HCTL_HC-TYPE-C-16P-01A | J3 |
It measures 80 × 80 mm and has 4 copper layers, 1.6 mm thick.
96 parts, built around the STM32H753ZIT6, CP2102N-EK, IS61WV204816BLL-10TLI and LAN8720A-CP. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the bson/stm32simh repository on GitHub, at the commit this page was made from: the board is stm32simh.kicad_pcb and its schematic ethernet.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).

antsouchlos/commonsense-hw
A BLE-based PCB for measuring humidity and temperature

OpenParol/OpenParol-Board
Open-source project for a 6-DOF robotic arm controller


agranlund/raven
Homemade MC68060 + DSP56303 Atari-compatible computer. Hardware, firmware, and software stack


LNH-team/Lost-NDS-TV
The Lost Nintendo DS Television Output, brought back to life

