2 layers19 × 76 mm
Sub
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
15 parts3kApache-2.0
2 layers181.8 × 28.5 mm
Glider
bskari/eclipse-habCode for the Solid State Depot high altitude balloon 2017 eclipse launch
- Size
- 181.8 × 28.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 15
- Nets
- 42
- Pads
- 85
- Tracks, vias
- 135, 0
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 19 Jul 2017
- Updated
- 20 Jan 2026
Overview
Glider is an open-source printed circuit board by bskari, from the bskari/eclipse-hab repository on GitHub, published under the MIT licence. It is a 2-layer board of 181.8 × 28.5 mm with 15 parts on 42 nets, routed with 135 tracks and 0 vias.
Its parts include 13 connectors, 1 capacitor and 1 IC. It belongs with the ESP32 boards of this library.
README
README.mdeclipse-2017-hab
Code for the Solid State Depot high altitude balloon 2017 eclipse launch
Parts
15| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 5V buck boost | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2, J12 |
| 2 | Li-Ion Molex | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J4, J5 |
| 1 | C_Polarized | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C1 |
| 1 | ESP32-DevKit-USB-C | boards:ESP32-DevKit-USB-C | U1 |
| 1 | FM_jumper | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J11 |
| 1 | GT-U7 GPS | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Vertical | J1 |
| 1 | LSM303DLHC1 | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J3 |
| 1 | SD_card | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J10 |
| 1 | Servo 1 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J6 |
| 1 | Servo 2 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J7 |
| 1 | Servo 3 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J8 |
| 1 | Servo power | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J13 |
| 1 | Si4713_FM_transmitter | Connector_PinSocket_2.54mm:PinSocket_1x11_P2.54mm_Vertical | J9 |
Questions
How big is the Glider PCB?
It measures 181.8 × 28.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Glider use?
15 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Glider KiCad files?
From the bskari/eclipse-hab repository on GitHub, at the commit this page was made from: the board is glider/board/glider.kicad_pcb and its schematic glider/board/glider.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Glider design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers26.7 × 62.2 mm
Deniseadapter
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
15 parts1kGPL-3.0 - 2 layers100 × 44 mm
Videoslot
mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog
15 parts1k - 2 layers91 × 51 mm
BusinessCard
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
15 parts915 - 2 layers24.3 × 57.9 mm
Flosspods pro flex
kenp-io/not-for-airpods-repairs
The content of this repository is licensed under the WTFPL License. Please have a close look at the terms before using this material.
15 parts609WTFPL - 2 layers20.3 × 15.2 mm
L0 Load
Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
15 parts546MIT - 2 layers68 × 50 mm
EleLab v2 PowerFeed
Chrismettal/EleLab_v2
Cheap DIY lab system for hobbyists and the tinkering folk
15 parts531GPL-3.0 - 2 layers50.8 × 35.6 mm
