

Reservoir Circuit
ECE 298 Reservoir Circuit Schematic and PCB Design, modeled in KiCad
- Size
- 70 × 57.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 34
- Nets
- 104
- Pads
- 201
- Tracks, vias
- 505, 42
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 22 Jul 2026
- Updated
- 5 Aug 2026
Overview
Reservoir Circuit is an open-source printed circuit board by bryan-bpms, from the bryan-bpms/Reservoir_Circuit repository on GitHub. It is a 2-layer board of 70 × 57.5 mm with 34 parts on 104 nets, routed with 505 tracks and 42 vias.
It is built around the CD74HC540E, L9110S and HC-SR04. Its parts include 10 capacitors, 6 ICs, 3 resistors, 3 connectors and 1 diode.
Main components
3CD74HC540E
PDIP-20-55℃~+125℃ 1 160uA 2V~6V 7.8mA 7.8mA 74HC 8 9ns@5V,15pF Tri-State PDIP-20 Buffers, Drivers, Receivers, Transceivers ROHSTexas InstrumentsBuffers, Drivers, Receivers, TransceiversL9110S
SOP-8-20℃~+80℃ 100nA 2.5A 3V~9V SOP-8 Brushed DC Motor Drivers ROHSMixicBrushed DC Motor DriversHC-SR04
-- Ultrasonic Receivers, Transmitters ROHSUniversal MicroelectronicsUltrasonic Receivers, Transmitters
README
README.mdECE 298 Reservoir Circuit Designs
ECE 298 Reservoir Circuit Schematic and PCB Design, modeled in KiCad. No longer maintained.
Parts
34| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 10nF | Capacitor_SMD:C_1206_3216Metric | C3, C4, C5, C6, C7, C8, C9 |
| 3 | 100 | PCM_SparkFun-Resistor:R_0603_1608Metric | R1, R2, R3 |
| 3 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3 |
| 2 | 25uF | Capacitor_SMD:C_Elec_3x5.4 | C1, C2 |
| 2 | ~ | CD74HC4049MT:SOIC127P600X175-16N | U3, U4 |
| 1 | 100pF | Capacitor_SMD:C_1206_3216Metric | C10 |
| 1 | CD74HC540E | CD74HC540M:SOIC127P1030X265-20N | U1 |
| 1 | CN10 | Connector_PinSocket_2.54mm:PinSocket_2x19_P2.54mm_Vertical | J2 |
| 1 | CN7 | Connector_PinSocket_2.54mm:PinSocket_2x19_P2.54mm_Vertical | J1 |
| 1 | ECE298_RS_PWR_EXT | Connector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | J3 |
| 1 | HC-SR04 | HC-SR04:XCVR_HC-SR04 | U2 |
| 1 | L9110S | L9110S:SOIC127P599X172-8N | U5 |
| 1 | LED_GRKB | LED_SMD:LED_Inolux_IN-PI554FCH_PLCC4_5.0x5.0mm_P3.2mm | D1 |
| 1 | Motor_DC | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | M2 |
| 1 | Motor_Servo | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | M1 |
| 1 | R_Potentiometer_US | Potentiometer_SMD:Potentiometer_Bourns_3314J_Vertical | RV1 |
| 1 | TP_GND | Connector_PinHeader_1.00mm:PinHeader_1x01_P1.00mm_Vertical | TP1 |
| 1 | TP_POT | Connector_PinHeader_1.00mm:PinHeader_1x01_P1.00mm_Vertical | TP2 |
| 1 | TP_RPM | Connector_PinHeader_1.00mm:PinHeader_1x01_P1.00mm_Vertical | TP4 |
| 1 | TP_SERVO | Connector_PinHeader_1.00mm:PinHeader_1x01_P1.00mm_Vertical | TP3 |
| 1 | ~ | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | DS1 |
| 1 | ~ | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | U6 |
Similar boards
- 2 layers200 × 200 mm

- 2 layers238.8 × 120.6 mm

- 2 layers82 × 62.5 mm

- 4 layers26.7 × 43.8 mm

- 2 layers96 × 120.1 mm

Side panel
ToonVanEyck/OpenFlap
The OpenFlap project aims to create a open source, affordable split-flap display for the makers and tinkerers of the world.
43 parts98 - 2 layers50 × 50 mm

- 2 layers80 × 60 mm

Placa principal
F-Iglesias/Balancin
A self-balancing robot I made in 2023 as final project for my electronics technical program in high-school.
19 parts - 2 layers80 × 60 mm

EnvMonitor
kennySzhucheng/EnvMonitor
🌡️ 智能环境监测站 | STM32F103C8T6 + FreeRTOS + ESP8266 | 温湿度/光照/测距/OLED菜单/ThingSpeak上云 | 从裸机到RTOS到KiCad PCB全流程
27 parts10
Questions
How big is the Reservoir Circuit PCB?
It measures 70 × 57.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Reservoir Circuit use?
34 parts, built around the CD74HC540E, L9110S and HC-SR04. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Reservoir Circuit KiCad files?
From the bryan-bpms/Reservoir_Circuit repository on GitHub, at the commit this page was made from: the board is Reservoir_Circuit.kicad_pcb and its schematic Reservoir_Circuit.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Reservoir Circuit design in my own project?
Its repository states no licence, so its author keeps all rights: ask bryan-bpms before reusing the design.