

EuroRack sytle analog synthasizer designs
- Size
- 100 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 89
- Nets
- 96
- Pads
- 306
- Tracks, vias
- 485, 63
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 25 Nov 2020
- Updated
- 23 Feb 2025
Overview
NOT is an open-source printed circuit board by BruteClaw, from the BruteClaw/Analog-Synth repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 100 × 100 mm with 89 parts on 96 nets, routed with 485 tracks and 63 vias.
It is built around the CD4069, LL4148 and MMBT3904. Its parts include 38 resistors, 19 connectors, 18 diodes, 6 transistors and 5 capacitors. It belongs with the audio and music boards of this library.
Main components
3CD4069
SOP-140℃~+60℃ 1 10mA 1V、2V、3V 1uA 24mA 25ns@15V,51pF 3V~15V 4.95V、9.95V、14.95V 4V、8V、12V 50mV、50mV、50mV 6 SOP-14 Inverters ROHSSlkorInvertersLL4148
LL-341 Independent 1V@10mA 200mA 4A 4ns 500mW 5uA@75V 75V LL-34 Switching Diodes ROHSMDDSwitching DiodesMMBT3904
SOT-23-55℃~+150℃ 1 NPN 100 100nA 200mA 200mW 300MHz 300mV 40V 6V NPN SOT-23 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)
README
README.mdAnalog-Synth
Analog Synthasizer Designs
These are designs for EuroRack compatable synthasizer modules.
Each module is designed as a seperate project in KiCAD Each folder includes a BOM from Mouser.com, the Gerber Files if you just want to have a board printed and a PDF of the schematic.
I have taken insparation from all over the web including Music From Outer Space, Yusynth and Look Mom no Computer. Some designs are outright copies of their schematic with my board layout design.
Look in Overal Design.xlsx for where I have gotten the design from And current progress on the designs.
All designs are without waranty, please build at your own risk, I have not tested any of these designs at this time. If you build any of them, you assume responsibiltiy for any potential damage to your existing equipment.
Parts
89| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | 1K | Resistors_SMD:R_1210_HandSoldering | R1, R10, R13, R16, R21, R23, R25, R27, R29, R31, R33, R34, R35, R36, R37, R38 +2 |
| 12 | 2k7 | Resistors_SMD:R_1210_HandSoldering | R3, R6, R9, R12, R15, R18, R22, R24, R26, R28, R30, R32 |
| 12 | AudioJack1_Switch | Custom_Library:Mono_Jack_3.5mm_Switch_Switchcraft_35RAPC2AH3 | J1, J2, J3, J4, J5, J6, J14, J15, J16, J17, J18, J19 |
| 12 | LED | LEDs:LED_Rectangular_W3.9mm_H1.9mm | D1, D2, D3, D4, D5, D6, D13, D14, D15, D16, D17, D18 |
| 7 | 100K | Resistors_SMD:R_1210_HandSoldering | R2, R5, R8, R11, R14, R17, R19 |
| 6 | Conn_01x08 | Pin_Headers:Pin_Header_Straight_1x08_Pitch2.54mm | J7, J8, J9, J10, J12, J13 |
| 6 | LL4148 | Diodes_SMD:D_MiniMELF_Handsoldering | D7, D8, D9, D10, D11, D12 |
| 6 | MMBT3904 | TO_SOT_Packages_SMD:SOT-23 | Q1, Q2, Q3, Q4, Q5, Q6 |
| 5 | C | Capacitors_SMD:C_1210_HandSoldering | C1, C2, C3, C4, C5 |
| 2 | TL074 | Housings_SOIC:SOIC-14_3.9x8.7mm_Pitch1.27mm | U1, U2 |
| 1 | 10K | Resistors_SMD:R_1210_HandSoldering | R20 |
| 1 | CD4069 | Housings_SOIC:SOIC-14_3.9x8.7mm_Pitch1.27mm | U3 |
| 1 | Conn_02x08_Odd_Even | Pin_Headers:Pin_Header_Straight_2x08_Pitch2.54mm | J11 |
More from BruteClaw/Analog-Synth
12- 2 layers100 × 110 mm

- 2 layers100 × 100 mm

- 2 layers100 × 100 mm

- 2 layers100 × 100 mm

- 2 layers100 × 110 mm

- 2 layers100 × 110 mm

- 2 layers200 × 120 mm

- 2 layers80 × 110 mm

- 2 layers80 × 110 mm

- 2 layers200 × 120 mm

- 2 layers54 × 100 mm

- 2 layers54 × 100 mm

Similar boards
- 2 layers100 × 45 mm

Transcribe
cyberboy666/_transcribe_
midi to rs232 bridge - for performance control of old video mixers and switchers
28 parts20 - 4 layers115.7 × 44.5 mm

RS36512VDCDriver
Aykut-Gencer-KARACA/RS-36512VDC3A-MotorDriver-Hbridge
Bu proje, bir önceki çalışmamda kullandığım RS-365 serisi 12 V DC / 3 A motoru çift yönlü ve hız kontrollü sürmek için tasarlanmış bir H-köprü kartıdır.
57 parts - 2 layers149.1 × 150.3 mm

Encoder
charbel-j-estephan/Fm_Stereo_Encoder_Decoder
FM stereo encoder and decoder with 19 kHz pilot, designed in LTspice and KiCad.
170 parts - 2 layers95 × 72 mm

Bionic
Shrijal2410/BionicArm
Our project aims to provide a realistic, functional prosthetic hand for those who have lost theirs. We're not delving into mastering neurology; instead, we're focusing on using muscle sensor data (EMG) to control the…
39 parts - 2 layers348.1 × 120.9 mm

Nummacro
digitalrane/ec0board
QMK AT90USB1286 Mechanical TKL Keyboard - Retrofit for Kogan Mechanical TKL
370 parts12 - 2 layers185.9 × 120 mm

KwartzLab SensorBoard Rev3-Panel
kwartzlab/Environmental-Sensor
The source for the environmental sensors used at Kwartzlab
200 parts3 - 4 layers18.9 × 20.9 mm

555 SMD
tro-nic/555_SMD
Small board to use in breadboads projects. #LM555 SMD on #PCB 4 layers, One inch module.
16 parts1 - 2 layers83.4 × 141 mm

Questions
How big is the NOT PCB?
It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the NOT use?
89 parts, built around the CD4069, LL4148 and MMBT3904. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the NOT KiCad files?
From the BruteClaw/Analog-Synth repository on GitHub, at the commit this page was made from: the board is Surface Mount Designes/Logic_Gates/NOT/NOT.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the NOT design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).