Skip to the content
2 layers100 × 110 mmComb Filter, the printed circuit board in 3D

EuroRack sytle analog synthasizer designs

Size
100 × 110 mm
Copper layers
2
Thickness
1.6 mm
Parts
168
Nets
142
Pads
504
Tracks, vias
46, 0
Pours
4
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
25 Nov 2020
Updated
23 Feb 2025

Overview

Comb Filter is an open-source printed circuit board by BruteClaw, from the BruteClaw/Analog-Synth repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 100 × 110 mm with 168 parts on 142 nets, routed with 46 tracks and 0 vias.

Its parts include 77 resistors, 44 capacitors, 17 connectors and 4 ICs. It belongs with the audio and music boards of this library.

README

README.md

Analog-Synth

Analog Synthasizer Designs

These are designs for EuroRack compatable synthasizer modules.

Each module is designed as a seperate project in KiCAD Each folder includes a BOM from Mouser.com, the Gerber Files if you just want to have a board printed and a PDF of the schematic.

I have taken insparation from all over the web including Music From Outer Space, Yusynth and Look Mom no Computer. Some designs are outright copies of their schematic with my board layout design.

Look in Overal Design.xlsx for where I have gotten the design from And current progress on the designs.

All designs are without waranty, please build at your own risk, I have not tested any of these designs at this time. If you build any of them, you assume responsibiltiy for any potential damage to your existing equipment.

Parts

168
QtyValueFootprintReferences
1833kResistors_SMD:R_1210_HandSolderingR1, R2, R3, R4, R5, R15, R23, R25, R30, R36, R39, R41, R49, R54, R59, R66 +2
12AudioJack1_SwitchCustom_Library:Mono_Jack_3.5mm_Switch_Switchcraft_35RAPC2AH3J1, J3, J4, J5, J6, J7, J8, J9, J10, J11, J12, J13
11220Resistors_SMD:R_1210_HandSolderingR13, R14, R28, R31, R45, R46, R57, R58, R64, R71, R72
1010kResistors_SMD:R_1210_HandSolderingR8, R10, R16, R22, R24, R26, R33, R38, R40, R44
10PTL20Custom_Library:PLT20FADE1, FADE2, FADE3, FADE4, FADE5, FADE6, FADE7, FADE8, FADE9, FADE10
915kResistors_SMD:R_1210_HandSolderingR6, R12, R27, R29, R42, R43, R55, R56, R70
8100kCustom_Library:PVG5ARV1, RV3, RV4, RV7, RV8, RV11, RV12, RV15
820kCustom_Library:PVG5ARV2, RV5, RV6, RV9, RV10, RV13, RV14, RV16
7150kResistors_SMD:R_1210_HandSolderingR11, R20, R32, R48, R50, R62, R73
60.0022uFCapacitors_SMD:C_1210_HandSolderingC24, C25, C31, C35, C36, C37
6100pFCapacitors_SMD:C_1210_HandSolderingC2, C3, C4, C27, C29, C32
50.0047uFCapacitors_SMD:C_1210_HandSolderingC11, C15, C18, C19, C22
50.01uFCapacitors_SMD:C_1210_HandSolderingC5, C9, C14, C33, C38
5180kResistors_SMD:R_1210_HandSolderingR21, R35, R51, R67, R74
40.022uFCapacitors_SMD:C_1210_HandSolderingC17, C21, C23, C30
4100uFCapacitors_SMD:CP_Elec_6.3x5.8C40, C41, C42, C43
456kResistors_SMD:R_1210_HandSolderingR17, R18, R19, R53
4Conn_01x07Pin_Headers:Pin_Header_Straight_1x07_Pitch2.54mmJ14, J15, J16, J17
4TL074Housings_SOIC:SOIC-14_3.9x8.7mm_Pitch1.27mmU1, U2, U3, U4
30.047uFCapacitors_SMD:C_1210_HandSolderingC6, C12, C16
20.0015uFCapacitors_SMD:C_1210_HandSolderingC7, C34
20.47uFCapacitors_SMD:C_1210_HandSolderingC1, C28
2100kResistors_SMD:R_1210_HandSolderingR37, R63
222uFCapacitors_SMD:CP_Elec_5x5.8C39, C44
2330Resistors_SMD:R_1210_HandSolderingR76, R77
2470pFCapacitors_SMD:C_1210_HandSolderingC20, C26
268kResistors_SMD:R_1210_HandSolderingR34, R61
2820pFCapacitors_SMD:C_1210_HandSolderingC8, C13
291kResistors_SMD:R_1210_HandSolderingR47, R60
11k5Resistors_SMD:R_1210_HandSolderingR75
1220kResistors_SMD:R_1210_HandSolderingR69
122uFCapacitors_SMD:C_1210_HandSolderingC10
14k7Resistors_SMD:R_1210_HandSolderingR65
164k9Resistors_SMD:R_1210_HandSolderingR52
16k8Resistors_SMD:R_1210_HandSolderingR68
1Conn_02x05_Odd_EvenPin_Headers:Pin_Header_Straight_2x05_Pitch2.54mmJ2

More from BruteClaw/Analog-Synth

12
  • 2 layers100 × 100 mmNAND, the printed circuit board in 3D

    NAND

    BruteClaw/Analog-Synth

    EuroRack sytle analog synthasizer designs

    89 parts10GPL-3.0
  • 2 layers100 × 100 mmNOT, the printed circuit board in 3D

    NOT

    BruteClaw/Analog-Synth

    EuroRack sytle analog synthasizer designs

    89 parts10GPL-3.0
  • 2 layers100 × 100 mmNOR THT, the printed circuit board in 3D

    NOR THT

    BruteClaw/Analog-Synth

    EuroRack sytle analog synthasizer designs

    89 parts10GPL-3.0
  • 2 layers100 × 100 mmNOT THT, the printed circuit board in 3D

    NOT THT

    BruteClaw/Analog-Synth

    EuroRack sytle analog synthasizer designs

    89 parts10GPL-3.0
  • 2 layers100 × 110 mmLFO, the printed circuit board in 3D

    LFO

    BruteClaw/Analog-Synth

    EuroRack sytle analog synthasizer designs

    79 parts10GPL-3.0
  • 2 layers100 × 110 mmLFO THT, the printed circuit board in 3D

    LFO THT

    BruteClaw/Analog-Synth

    EuroRack sytle analog synthasizer designs

    79 parts10GPL-3.0
  • 2 layers200 × 120 mmPower Supply THT, the printed circuit board in 3D

    Power Supply THT

    BruteClaw/Analog-Synth

    EuroRack sytle analog synthasizer designs

    57 parts10GPL-3.0
  • 2 layers80 × 110 mmADSR Envelope, the printed circuit board in 3D

    ADSR Envelope

    BruteClaw/Analog-Synth

    EuroRack sytle analog synthasizer designs

    55 parts10GPL-3.0
  • 2 layers80 × 110 mmADSR Envelope THT, the printed circuit board in 3D

    ADSR Envelope THT

    BruteClaw/Analog-Synth

    EuroRack sytle analog synthasizer designs

    55 parts10GPL-3.0
  • 2 layers200 × 120 mmPower Supply, the printed circuit board in 3D

    Power Supply

    BruteClaw/Analog-Synth

    EuroRack sytle analog synthasizer designs

    53 parts10GPL-3.0
  • 2 layers54 × 100 mmVCF, the printed circuit board in 3D

    VCF

    BruteClaw/Analog-Synth

    EuroRack sytle analog synthasizer designs

    48 parts10GPL-3.0
  • 2 layers54 × 100 mmVCF THT, the printed circuit board in 3D

    VCF THT

    BruteClaw/Analog-Synth

    EuroRack sytle analog synthasizer designs

    48 parts10GPL-3.0

Similar boards

  • 2 layers344.4 × 130.8 mmSesame, the printed circuit board in 3D

    Sesame

    str-dst/sesame

    Alice type ergo keyboard using only THT parts

    168 parts331
  • 2 layers284.7 × 94.2 mmSST60HS, the printed circuit board in 3D

    SST60HS

    dededecline/SST60

    168 parts107GPL-3.0
  • 2 layers102 × 102 mmMRR ESPE, the printed circuit board in 3D

    MRR ESPE

    maplerainresearch/MRR_ESPE

    MRR ESPE 3D printer control board

    168 parts39
  • 2 layers85 × 40 mmSnapNodes RP2, the printed circuit board in 3D

    SnapNodes RP2

    shBLOCK/TileGlobeMC

    Project Structure ----- - tileglobe: game logic - datagen/mod: a fabric modding environment for extracting/generating data from vanilla (e.g.

    168 parts21
  • 2 layers100 × 100 mmMcu, the printed circuit board in 3D

    Mcu

    cs2dsb/coffee_assistant

    Free and open source software distributed under the terms of both the [MIT License][lm] and the [Apache License 2.0][la].

    168 parts10Apache-2.0
  • 2 layers265.7 × 87.7 mmCorne choc, the printed circuit board in 3D

    Corne choc

    idank/keyboards

    This repo contains pcb and 3d files for keyboards. The keyboards are adaptations of popular open source keyboards with a variety of changes.

    168 parts10CC-BY-SA-4.0
  • 2 layers312.3 × 119 mmFrost, the printed circuit board in 3D

    Frost

    ayaangrover/frost

    A 75% mechanical keyboard

    168 parts2
  • 2 layersCurry2, the printed circuit board in 3D

    Curry2

    etf-lth/rasdaq

    Rasdaq Raspberry Pi Data Acquisition: Hardware, Firmware, Tools

    168 parts2

Questions

How big is the Comb Filter PCB?

It measures 100 × 110 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Comb Filter use?

168 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Comb Filter KiCad files?

From the BruteClaw/Analog-Synth repository on GitHub, at the commit this page was made from: the board is Unfinished Designs/Comb_Filter/Comb_Filter.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Comb Filter design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).