

DU UC V1 - Minnow
STM32L552ZET6Q Breakout "Minnow"
- Size
- 48.1 × 69.6 mm
- Copper layers
- 6
- Thickness
- 1.15 mm
- Parts
- 145
- Nets
- 222
- Pads
- 819
- Tracks, vias
- 2,188, 667
- Pours
- 30
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 5 Aug 2025
- Updated
- 24 Dec 2025
Overview
DU UC V1 - Minnow is an open-source printed circuit board by bruinformula, from the bruinformula/Minnow-Breakout-PCB repository on GitHub. It is a 6-layer board of 48.1 × 69.6 mm with 145 parts on 222 nets, routed with 2,188 tracks and 667 vias.
It is built around the STM32L552ZET6Q, TCAN334GD and TPS25961DRV, with the 74HC4051, PSM712-LF-T7 and TPS7B8733QKVURQ1 among its other parts. Its parts include 48 resistors, 39 capacitors, 18 diodes, 10 ICs and 6 transistors. It belongs with the STM32 boards of this library.
Main components
8STM32L552ZET6Q
LQFP-144(20x20)-40℃~+85℃ 1.71V~3.6V 110MHz 111 12bit 12bit 256KB 32 Bit 512KB ARM Cortex-M33 Built-in FLASH LQFP-144(20x20) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)TCAN334GD
SOIC-8-40℃~+125℃ 1 20uA 3.3V 55mA 5Mbps CAN FD Transceiver Low-power mode、Wake-up function、TXD dominant timeout、ESD protection、Undervoltage Protection、Thermal shutdown protection、Bus fault protection SOIC-8 CAN Transceivers ROHSTexas InstrumentsCAN TransceiversTPS25961DRV
WSON-6(2x2)-40℃~+125℃ 0.75mm 1 100mA~2A 106mΩ 2.7V~19V 2mm 2mm Integrated FET Overcurrent Protection、Short-Circuit Protection、Under-voltage lockout、Thermal Protection Surface Mount WSON-6(2x2) Surge Protection Devices (SPDs) ROHSTexas InstrumentsSurge Protection Devices (SPDs)74HC4051
SOP-16-40℃~+85℃ 1 170MHz 28ns 29ns 3V~9V 5ns 5pF 80Ω 8:1 SOP-16 Analog Switches, Multiplexers ROHSWuxi I-core ElecAnalog Switches, MultiplexersPSM712-LF-T7
SOT-23-55℃~+150℃ 12V 13.3V 19V 1uA、20uA 30A@8/20us、34A@8/20us 600W@8/20us 75pF IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 TVS Unidirectional SOT-23 ESD and Surge Protection (TVS/ESD) ROHSPROTEKESD And Surge Protection (TVS/ESD)TPS7B8733QKVURQ1
TO-252-4-40℃~+150℃@(Tj) 1 21uA 3.3V 40V 475mV@(450mA) 500mA 70dB@(1kHz) Fixed PG Pin、Over Current Protection、Over Temperature Protection Positive TO-252-4 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsBSS84
SOT-23-55℃~+150℃ 1 P-Channel 130mA 2.8pF 24.6pF 2V 3.2Ω@5V 300mW 4.7pF 50V 590pC@10V SOT-23 MOSFETs ROHSDiodes IncorporatedMOSFETsMMBT3904
SOT-23-55℃~+150℃ 1 NPN 100 100nA 200mA 200mW 300MHz 300mV 40V 6V NPN SOT-23 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)
Parts
145| Qty | Value | Footprint | References |
|---|---|---|---|
| 21 | 100n | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C403, C504, C505, C506, C508, C514, C516, C519, C521, C1101, C1102, C1601, C1602, C1603, C1604, C1605 +5 |
| 8 | 220 | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R1101, R1102, R1103, R1104, R1105, R1106, R1107, R1108 |
| 8 | Red | Diode_SMD:D_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1101, D1102, D1103, D1104, D1105, D1106, D1107, D1108 |
| 6 | 1u | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C301, C302, C303, C304, C305, C306 |
| 6 | 47k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R901, R902, R903, R904, R905, R906 |
| 5 | 100k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R403, R404, R1407, R1408, R1704 |
| 5 | 10k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R401, R402, R501, R1701, R1801 |
| 5 | 120 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R702, R703, R1301, R1502, R1503 |
| 5 | BSS84 | Package_TO_SOT_SMD:SOT-23 | Q701, Q702, Q1301, Q1501, Q1502 |
| 4 | 22 | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R1802, R1803, R1804, R1805 |
| 4 | SolderJumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged_Pad1.0x1.5mm | JP1801, JP1802, JP1803, JP1804 |
| 4 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP1805, JP1806, JP1807, JP1808 |
| 4 | White | Diode_SMD:D_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D701, D702, D1501, D1502 |
| 3 | 100 | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R405, R406, R409 |
| 3 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C517, C701, C1501 |
| 2 | 10u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C201, C203 |
| 2 | 120 | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R701, R1501 |
| 2 | 18p | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C401, C402 |
| 2 | 20V | Diode_SMD:D_SMB | D1401, D1402 |
| 2 | 22p | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C509, C510 |
| 2 | 360 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1402, R1405 |
| 2 | 390 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1403, R1406 |
| 2 | 4.7k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R407, R408 |
| 2 | 7.0p | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C501, C502 |
| 2 | CAN_TERM | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP701, JP1501 |
| 2 | TCAN334G | Package_TO_SOT_SMD:TSOT-23-8 | U701, U1501 |
| 2 | TPS25961 | Package_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm | U1401, U1402 |
| 1 | 1.5k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R1703 |
| 1 | 16MHz, 7pF | bfr_crystals:ABM3-16.000MHZ-D2Y-T | Y502 |
| 1 | 20p | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C404 |
| 1 | 270 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1404 |
| 1 | 32.768kHz, 1.2pF | Crystal:Crystal_SMD_2012-2Pin_2.0x1.2mm_HandSoldering | Y501 |
| 1 | 36k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1702 |
| 1 | 3V3 | Diode_SMD:D_SOD-123 | D901 |
| 1 | 470 | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R1401 |
| 1 | 600m | Diode_SMD:D_SOD-323_HandSoldering | D1701 |
| 1 | 74HC4051 | Package_SO:TSSOP-16_4.4x5mm_P0.65mm | U1101 |
| 1 | 8MHz 5pF | Crystal:Crystal_SMD_5032-2Pin_5.0x3.2mm_HandSoldering | Y401 |
| 1 | AVDD_SEL | Jumper:SolderJumper-3_P1.3mm_Bridged2Bar12_Pad1.0x1.5mm_NumberLabels | JP301 |
| 1 | Conn_02x05_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical_SMD | J1801 |
| 1 | Green | Diode_SMD:D_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1301 |
| 1 | LOGO | bfr_logos:BFR_Small | G*** |
| 1 | MCU_RST | Button_Switch_SMD:SW_Push_1P1T-SH_NO_CK_KMR2xxG | SW501 |
| 1 | MMBT3904 | Package_TO_SOT_SMD:SOT-23 | Q1701 |
| 1 | MX25R3235FM2xx1 | Package_SO:SOIC-8_5.3x5.3mm_P1.27mm | U901 |
| 1 | MicroUSB | Connector_USB:USB_Micro-B_Molex-105133-0001 | J1701 |
| 1 | PSM712-LF-T7 | Package_TO_SOT_SMD:SOT-23 | U1701 |
| 1 | SODIMM-260 | bfr_connectors:SODIMM-260 DDR4 | J201 |
| 1 | STLINK | LED_SMD:LED_0603_1608Metric | D401 |
| 1 | STLINK_RST | Button_Switch_SMD:SW_Push_1P1T-SH_NO_CK_KMR2xxG | SW401 |
| 1 | STM32F103CBTx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U401 |
| 1 | STM32L552ZET6Q | Package_QFP:LQFP-144_20x20mm_P0.5mm | U501 |
| 1 | TPS7B8733QKVURQ1 | Package_TO_SOT_SMD:TO-252-5_TabPin3 | U301 |
| 1 | VDDIO_SEL | Jumper:SolderJumper-3_P1.3mm_Bridged2Bar12_Pad1.0x1.5mm_NumberLabels | JP503 |
| 1 | VDDUSB_SEL | Jumper:SolderJumper-3_P1.3mm_Bridged2Bar12_Pad1.0x1.5mm_NumberLabels | JP501 |
| 1 | VREF_SEL | Jumper:SolderJumper-3_P1.3mm_Bridged2Bar12_Pad1.0x1.5mm_NumberLabels | JP502 |
The 144 most common of 145 parts.
Similar boards
- 4 layers91.6 × 84.4 mm

- 4 layers92 × 88.9 mm

Cubesat obc
ephemeridis/cubesat_obc
A small CubeSat On-Board Computer with lots of processing headroom, utilizing a low power ARM Cortex M33 processor at its core.
311 parts2MIT - 4 layers255.9 × 224.5 mm

Central control unit
RomLab/pcb-system-for-underfloor-heating-v2.0
PCB for underfloor heating system
929 parts1 - 2 layers51 × 18.5 mm

Entree
tuna-f1sh/entree
Entree is a USB-C CAN interface designed to fully support CANnectivity - gets the CAN party started!
78 parts89 - 4 layers90 × 90 mm

Sahel pcb
Aliou8/SAHEL-SPECTRA-RF
CubeSat for educational purposes. It is based on an STM32H7 MCU for data handling and uses two CC1125 radios for communication. The software is developed using a Zephyr-like RTOS.
172 parts2GPL-3.0 - 2 layers84 × 138.6 mm

- 4 layers50 × 60 mm

Canarynode
aboller1212/canarynode
Custom CAN sensor node: STM32G474 + IMU + environmental, USB-C, 4-layer PCB
65 parts1 - 4 layers54 × 86 mm

Questions
How big is the DU UC V1 - Minnow PCB?
It measures 48.1 × 69.6 mm and has 6 copper layers, 1.15 mm thick.
What parts does the DU UC V1 - Minnow use?
145 parts, built around the STM32L552ZET6Q, TCAN334GD, TPS25961DRV and 74HC4051. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the DU UC V1 - Minnow KiCad files?
From the bruinformula/Minnow-Breakout-PCB repository on GitHub, at the commit this page was made from: the board is DU UC V1 - Minnow.kicad_pcb and its schematic DU UC V1 - Minnow.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the DU UC V1 - Minnow design in my own project?
Its repository states no licence, so its author keeps all rights: ask bruinformula before reusing the design.