
Base promicro
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

all controlled by a rust-powered STM32G031 micro!
G031 sht40 is an open-source printed circuit board by brrastak, from the brrastak/g031_sht40 repository on GitHub. It is a 2-layer board of 75 × 47 mm with 30 parts on 29 nets, routed with 195 tracks and 59 vias.
Its parts include 8 connectors, 4 capacitors, 4 ICs, 3 resistors and 1 diode. It belongs with the STM32 boards of this library.
Consists of:
all controlled by a rust-powered STM32G031 micro!

Enable threshold: 3.92V
Disable threshold: 3.60V
Unfortunately, the system doesn't work when supplied by 2.5V.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_3.5mm | H1, H2, H3, H4 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R3 |
| 2 | 2F | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C1, C4 |
| 2 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J6, J7 |
| 2 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H5, H6 |
| 2 | Screw_Terminal_01x02 | project:1725656 | J1, J4 |
| 1 | 0,1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3 |
| 1 | 10u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2 |
| 1 | 220 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | AEM10941 module | project:AEM10941 module | U1 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J5 |
| 1 | Conn_01x06_Pin | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J2 |
| 1 | Conn_01x08_Pin | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J8 |
| 1 | E-Ink display module | project:E-Ink display module | U4 |
| 1 | Jumper_2_Open | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 1 | Jumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP2 |
| 1 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
| 1 | SHT40 module | project:SHT40 module | U2 |
| 1 | STM32G031F6Px | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U3 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH-12mm | SW1 |
| 1 | stamp | project:stamp | G1 |

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards


VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

tenderlove/initial-v
It's a BMW shifter converted to a Bluetooth Keyboard that you use with Vim

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!


It measures 75 × 47 mm and has 2 copper layers, 1.6 mm thick.
30 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the brrastak/g031_sht40 repository on GitHub, at the commit this page was made from: the board is hardware/g031_sht40.kicad_pcb and its schematic hardware/g031_sht40.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask brrastak before reusing the design.