2 layers98 × 27 mm
2 layers44.4 × 9.5 mm
CAN Interjector
Brown-County-FIRST-Robotics/CAN_InterjectorAn button that can disable and terminate the can bus on both sides
- Size
- 44.4 × 9.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 5
- Nets
- 6
- Pads
- 18
- Tracks, vias
- 36, 0
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 28 Feb 2026
- Updated
- 1 Apr 2026
Overview
CAN Interjector is an open-source printed circuit board by Brown-County-FIRST-Robotics, from the Brown-County-FIRST-Robotics/CAN_Interjector repository on GitHub, published under the CC0-1.0 licence. It is a 2-layer board of 44.4 × 9.5 mm with 5 parts on 6 nets, routed with 36 tracks and 0 vias.
Its parts include 2 resistors, 2 connectors and 1 switch.
README
README.mdCAN Interjector
To panelize, run
kikit panelize --layout 'grid; rows: 5; cols: 1; hspace: 1mm; vspace: 1mm;' --cuts 'mousebites' CAN_Interjector.kicad_pcb panelized.kicad_pcbUse this extension to export it
Parts
5| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 120 ohms | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | Conn_01x02 | TerminalBlock_WAGO:TerminalBlock_WAGO_2601-1102_1x02_P3.50mm_Horizontal | J1, J2 |
| 1 | SW_DPDT_x2 | Library:SW_TL2201EEYA_EWI | SW1 |
Similar boards
- 2 layers21 × 33 mm
24g2usb pico2w
joypad-ai/joypad-os
Universal controller firmware for building adapters, dongles, and custom controllers.
5 parts1.7kApache-2.0 - 2 layers53.2 × 59.6 mm
A10 OLinuXino Lime Rev B SHIELD TEMPLATE
OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C
5 parts1.5k - 2 layers30 × 11 mm
Main control board servo tester
jamro/tiny-engineer
A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.
5 parts1.1k - 2 layers78.8 × 35.3 mm
KiCadTest
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
5 parts915 - 2 layers50 × 23 mm
- 2 layers43.2 × 28.5 mm
- 2 layers20.3 × 15.2 mm
L0 light sensor
Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
5 parts546MIT
Questions
How big is the CAN Interjector PCB?
It measures 44.4 × 9.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the CAN Interjector use?
5 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the CAN Interjector KiCad files?
From the Brown-County-FIRST-Robotics/CAN_Interjector repository on GitHub, at the commit this page was made from: the board is CAN_Interjector.kicad_pcb and its schematic CAN_Interjector.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the CAN Interjector design in my own project?
Its repository publishes it under the CC0-1.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).