
Nonam
brico-labs/Raptor
A followline robot with N20 motors, 16340 batteries, arduino pro micro and TB6612 or Raspberry Pi Zero.

A followline robot with N20 motors, 16340 batteries, arduino pro micro and TB6612 or Raspberry Pi Zero.
Raptor is an open-source printed circuit board by brico-labs, from the brico-labs/Raptor repository on GitHub. It is a 2-layer board of 135 × 100 mm with 16 parts on 27 nets, routed with 205 tracks and 0 vias.
Its parts include 4 connectors, 2 ICs, 2 switches and 1 resistor. It belongs with the AVR (ATmega, ATtiny) boards of this library.
This is the Raptor project repository
A followline robot with N20 motors, 16340 batteries, arduino pro micro and TB6612 or Raspberry Pi Zero.
This repository evolved
from fstdp/openscad, all openscad
files from the old repo are now on openscad_miscdirectory
This repo uses BricoLabs KiCAD Library as a submodule.
When cloning this repo you must:
git clone https://github.com/brico-labs/Raptor
cd Raptor
git submodule init
git submodule updateor just with one command:
git clone --recursive https://github.com/brico-labs/Raptorvariety of OpenSCAD things from different projects
Copyright 2017 Félix Sánchez-Tembleque
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | Battery | bl_kicad:Battery_16340 | BT1, BT2 |
| 2 | LOGO | bl_kicad:RaptorName_v1 | G***, G*** |
| 1 | 10k | Resistors_ThroughHole:Resistor_Horizontal_RM7mm | R1 |
| 1 | Arduino_Pro_Mini | bl_kicad:DIP-24_600 | U2 |
| 1 | CONN_01X04 | Socket_Strips:Socket_Strip_Straight_1x04 | P4 |
| 1 | CONN_02X08 | Socket_Strips:Socket_Strip_Straight_2x08 | P3 |
| 1 | LEFT_ENG | bl_kicad:Motor_raptor | P1 |
| 1 | LOGO | bl_kicad:RaptorCranium | G*** |
| 1 | LOGO | bl_kicad:BricoLabs_logo_small | G*** |
| 1 | RIGHT_ENG | bl_kicad:Motor_raptor | P2 |
| 1 | SW_PUSH | Buttons_Switches_ThroughHole:SW_PUSH-12mm | SW2 |
| 1 | Switch_SPDT_x2 | Buttons_Switches_ThroughHole:SW_Micro_SPST | SW1 |
| 1 | TB6612FNG_BREAKOUT | bl_kicad:DIP-16_600 | U1 |
The 15 most common of 16 parts.

brico-labs/Raptor
A followline robot with N20 motors, 16340 batteries, arduino pro micro and TB6612 or Raspberry Pi Zero.

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

conorpp/u2f-zero
U2F USB token optimized for physical security, affordability, and style

rusefi/rusefi
rusefi - GPL internal combustion engine control unit

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!


It measures 135 × 100 mm and has 2 copper layers, 1.6 mm thick.
16 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the brico-labs/Raptor repository on GitHub, at the commit this page was made from: the board is kicad/raptor/raptor.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask brico-labs before reusing the design.