
Analog
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

Personal project that distributes drinks to up to six cups
Drink Dispencer is an open-source printed circuit board by brianz123, from the brianz123/drinkDispenser repository on GitHub, published under the CC0-1.0 licence. It is a 2-layer board of 100 × 60 mm with 32 parts on 34 nets, routed with 85 tracks and 0 vias.
Its parts include 6 resistors, 4 switches and 2 diodes.
The Drink Dispenser is an Arduino-powered project designed to automatically fill one to six cups with the drink of your choice. Built as a personal engineering challenge, this project combines hardware control, PCB design, and 3D modeling to create a functional and customizable beverage distribution system.
This project was built for fun to explore hardware control, fluid management, and embedded systems. It uses an Arduino to control a water pump and distributes fluid into up to six glasses based on user input selected with a rotary encoder. LEDs connected to an I/O expander provide visual feedback on the number of drinks selected. The mechanical frame was designed in Autodesk Inventor, and the control board was custom-designed in KiCad.
Brian Zagalsky
| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | MountingHole_1.2mm | Arduino_MountingHole:MountingHole_1.2mm | 3.3V, A0, A1, A2, A3, A4, A5, A6, A7, D8, D9, D10, D11, D12, D13, GND |
| 4 | 10k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1, R2, R3, R4 |
| 2 | 220 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R5, R6 |
| 1 | 2 Min | Button_Switch_THT:SW_PUSH-12mm | SW2 |
| 1 | 3 Min | Button_Switch_THT:SW_PUSH-12mm | SW3 |
| 1 | Arduino Nano | Module:Arduino_Nano | A1 |
| 1 | Battery | Connector_Wago:Wago_734-132_1x02_P3.50mm_Vertical | V1 |
| 1 | FINDER-36.11 | Relay_THT:Relay_SPDT_Finder_36.11 | Relay |
| 1 | Horn | Button_Switch_THT:SW_PUSH-12mm | SW4 |
| 1 | Power | LED_THT:LED_D3.0mm | D2 |
| 1 | Reset | Button_Switch_THT:SW_PUSH-12mm | SW1 |
| 1 | Speaker | Connector_Wire:SolderWire-2.5sqmm_1x02_P7.2mm_D2.4mm_OD3.6mm | LS1 |
| 1 | Status | LED_THT:LED_D3.0mm | D1 |

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!


octosavvi/ESPKey
Wiegand data logger, replay device and micro door-controller

zmaker/arduino_cookbook
gli sketch del nuovo progetto Arduino Cookbook e dei video di YouTube

murexrobotics/electrical
Highly integrated electronics design and printed circuit boards (PCBs) for the MATE ROV Competition. Attempt the impossible.

swharden/AVR-projects
A collection of standalone AVR projects written in C

hardenedlinux/cheap-pcb
Cheap PCB: Better understanding the current status of hardware supply chain
It measures 100 × 60 mm and has 2 copper layers, 1.6 mm thick.
32 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the brianz123/drinkDispenser repository on GitHub, at the commit this page was made from: the board is Hardware/PCB Design/Drink Dispencer.kicad_pcb and its schematic Hardware/PCB Design/Drink Dispencer.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CC0-1.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).