
Z88 Mechanical Keyboard
BrettHallen/Sinclair
Projects for Sinclair computers (ZX80, ZX81, TS1000, TS1500, TS2068, Spectrum and clones)

Projects for Sinclair computers (ZX80, ZX81, TS1000, TS1500, TS2068, Spectrum and clones)
ZX81 Centronics is an open-source printed circuit board by BrettHallen, from the BrettHallen/Sinclair repository on GitHub. It is a 2-layer board of 68.8 × 82.6 mm with 18 parts on 78 nets, routed with 566 tracks and 22 vias.
It is built around the 74LS27P-E, 74LS30PC and 74LS32SC, with the BC558 among its other parts. Its parts include 6 capacitors, 4 resistors, 4 ICs, 1 transistor and 1 connector.
The Cambridge Computers Z88 has a DE9 serial port with the following pinout:
| DE9 Pin | Signal | Purpose | DB25 Pin |
|---|---|---|---|
| 1 | +5V | do not use | n/c |
| 2 | TxD | transmitted data | 2 |
| 3 | RxD | received data | 3 |
| 4 | RTS | request to send | 4 |
| 5 | CTS | clear to send | 5 |
| 6 | unknown | do not use | n/c |
| 7 | GND | signal ground | 7 |
| 8 | DCD | data carrier detect | 6 & 8 |
| 9 | DTR | data terminal ready | 20 |
To connect to a device with a DB25 plug we need to through-connect the DE9 pins to the equivalent on the DB25 side. Additionally, we need to connect DB25 pin 6 (DSR, data set ready) to the DCD signal.
Note that DB25 pin 1 is Protective Ground (PG) and must not be connected to signal ground.
Z88 side: DE9 male
DB25 side: DB25 female

| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 100nF | Capacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mm | C2, C3, C4, C6 |
| 2 | 10µF | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C1, C5 |
| 1 | 100KΩ | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3 |
| 1 | 10KΩ | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | 2.2KΩ | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
| 1 | 4.7Ω | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R4 |
| 1 | 74LS27 | Package_DIP:DIP-14_W7.62mm | U1 |
| 1 | 74LS30 | Package_DIP:DIP-14_W7.62mm | U3 |
| 1 | 74LS32 | Package_DIP:DIP-14_W7.62mm | U2 |
| 1 | 8255 | Package_DIP:DIP-40_W15.24mm | U4 |
| 1 | BC558 | Package_TO_SOT_THT:TO-92_Inline | Q1 |
| 1 | CENTRONICS | Connector_PinHeader_2.54mm:PinHeader_2x13_P2.54mm_Vertical | J1 |
| 1 | CONN_ZX81 | CluelessEngineer:ZX81_EDGE | BUS1 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_6mm_H4.3mm | SW1 |

BrettHallen/Sinclair
Projects for Sinclair computers (ZX80, ZX81, TS1000, TS1500, TS2068, Spectrum and clones)

BrettHallen/Sinclair
Projects for Sinclair computers (ZX80, ZX81, TS1000, TS1500, TS2068, Spectrum and clones)

BrettHallen/Sinclair
Projects for Sinclair computers (ZX80, ZX81, TS1000, TS1500, TS2068, Spectrum and clones)

BrettHallen/Sinclair
Projects for Sinclair computers (ZX80, ZX81, TS1000, TS1500, TS2068, Spectrum and clones)

BrettHallen/Sinclair
Projects for Sinclair computers (ZX80, ZX81, TS1000, TS1500, TS2068, Spectrum and clones)

BrettHallen/Sinclair
Projects for Sinclair computers (ZX80, ZX81, TS1000, TS1500, TS2068, Spectrum and clones)

BrettHallen/Sinclair
Projects for Sinclair computers (ZX80, ZX81, TS1000, TS1500, TS2068, Spectrum and clones)

BrettHallen/Sinclair
Projects for Sinclair computers (ZX80, ZX81, TS1000, TS1500, TS2068, Spectrum and clones)

BrettHallen/Sinclair
Projects for Sinclair computers (ZX80, ZX81, TS1000, TS1500, TS2068, Spectrum and clones)
BrettHallen/Sinclair
Projects for Sinclair computers (ZX80, ZX81, TS1000, TS1500, TS2068, Spectrum and clones)

BrettHallen/Sinclair
Projects for Sinclair computers (ZX80, ZX81, TS1000, TS1500, TS2068, Spectrum and clones)

BrettHallen/Sinclair
Projects for Sinclair computers (ZX80, ZX81, TS1000, TS1500, TS2068, Spectrum and clones)


yanataka60/X1_SD
X1、X1turboでSD-CARDからのアプリケーション起動、BASICなどのアプリケーションからSD-CARDへのロード、セーブを実現するものです

yanataka60/S-OS_OPN
Oh!MZに掲載されたハード版S-OS"MACE" I/Oポート及びFM音源ボートを1枚にまとめMZ-2000の拡張ボードとして設計してみました



laurent-fr/junior_computer_replica
A replica of the Junior Computer (a KIM-1 clone) published by Elektor in the 80's

CyberspiceHardware/BBCMicro128KRomRam
A 128K RAM sideways ROM/RAM board for the BBC Micro model B

flypie/Ace-2019
Reimplimentation of the Jupiter ACE with slightly more modern hardware. https://www.jupiter-ace.co.uk/ the KiCad versions are the up to date designs which are available at https://jupiterdeuce.blogspot.com and…
It measures 68.8 × 82.6 mm and has 2 copper layers, 1.6 mm thick.
18 parts, built around the 74LS27P-E, 74LS30PC, 74LS32SC and BC558. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the BrettHallen/Sinclair repository on GitHub, at the commit this page was made from: the board is ZX81_Centronics/Kicad/ZX81_Centronics.kicad_pcb and its schematic VDriveZ88_Serial_Converter/SurfaceMount/VDriveZ88_Serial_Converter_SMD.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask BrettHallen before reusing the design.