Skip to the content
2 layers45 × 18 mmZX80 Pixel Sync, the printed circuit board in 3D

ZX80 Pixel Sync

BrettHallen/Sinclair5

Projects for Sinclair computers (ZX80, ZX81, TS1000, TS1500, TS2068, Spectrum and clones)

Size
45 × 18 mm
Copper layers
2
Thickness
1.6 mm
Parts
7
Nets
17
Pads
41
Tracks, vias
85, 8
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
21 May 2025
Updated
22 Oct 2026

Overview

ZX80 Pixel Sync is an open-source printed circuit board by BrettHallen, from the BrettHallen/Sinclair repository on GitHub. It is a 2-layer board of 45 × 18 mm with 7 parts on 17 nets, routed with 85 tracks and 8 vias.

It is built around the 74LS74PC and BC548. Its parts include 2 connectors, 1 capacitor, 1 resistor, 1 IC and 1 diode.

Main components

2

README

Z88_Serial_DE9-to-DB25/README.md

Z88 Serial Port Converter

The Cambridge Computers Z88 has a DE9 serial port with the following pinout:

DE9 PinSignalPurposeDB25 Pin
1+5Vdo not usen/c
2TxDtransmitted data2
3RxDreceived data3
4RTSrequest to send4
5CTSclear to send5
6unknowndo not usen/c
7GNDsignal ground7
8DCDdata carrier detect6 & 8
9DTRdata terminal ready20

To connect to a device with a DB25 plug we need to through-connect the DE9 pins to the equivalent on the DB25 side. Additionally, we need to connect DB25 pin 6 (DSR, data set ready) to the DCD signal.

Note that DB25 pin 1 is Protective Ground (PG) and must not be connected to signal ground.

Z88 side: DE9 male
DB25 side: DB25 female

Z88 DE9 converter board

Parts

7
QtyValueFootprintReferences
1100nFCapacitor_THT:C_Disc_D3.0mm_W2.0mm_P2.50mmC1
11N4148Diode_THT:D_DO-35_SOD27_P7.62mm_HorizontalD202
174LS74Package_DIP:DIP-14_W7.62mmIC202
175ΩResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR100
1BC548Package_TO_SOT_THT:TO-92_InlineTR101
1IC201Package_DIP:DIP-14_W7.62mm_SocketJ1
1To_Minstrel2Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ2

More from BrettHallen/Sinclair

12
  • 2 layers289 × 110 mmZ88 Mechanical Keyboard, the printed circuit board in 3D

    Z88 Mechanical Keyboard

    BrettHallen/Sinclair

    Projects for Sinclair computers (ZX80, ZX81, TS1000, TS1500, TS2068, Spectrum and clones)

    72 parts5
  • 2 layers289 × 107.5 mmZ88 Mechanical Keyboard ANSI, the printed circuit board in 3D

    Z88 Mechanical Keyboard ANSI

    BrettHallen/Sinclair

    Projects for Sinclair computers (ZX80, ZX81, TS1000, TS1500, TS2068, Spectrum and clones)

    71 parts5
  • 2 layers276 × 89 mmZX80 Gaming Keyboard, the printed circuit board in 3D

    ZX80 Gaming Keyboard

    BrettHallen/Sinclair

    Projects for Sinclair computers (ZX80, ZX81, TS1000, TS1500, TS2068, Spectrum and clones)

    53 parts5
  • 2 layers207 × 88 mmZX80 Gaming Keyboard RevD, the printed circuit board in 3D

    ZX80 Gaming Keyboard RevD

    BrettHallen/Sinclair

    Projects for Sinclair computers (ZX80, ZX81, TS1000, TS1500, TS2068, Spectrum and clones)

    47 parts5
  • 2 layers210 × 90 mmZX Spectrum Keyboard Standard, the printed circuit board in 3D

    ZX Spectrum Keyboard Standard

    BrettHallen/Sinclair

    Projects for Sinclair computers (ZX80, ZX81, TS1000, TS1500, TS2068, Spectrum and clones)

    46 parts5
  • 2 layers60 × 62 mmZ88 Expansion Connector Keyboard, the printed circuit board in 3D

    Z88 Expansion Connector Keyboard

    BrettHallen/Sinclair

    Projects for Sinclair computers (ZX80, ZX81, TS1000, TS1500, TS2068, Spectrum and clones)

    27 parts5
  • 2 layers68.8 × 82.6 mmZX81 Centronics, the printed circuit board in 3D

    ZX81 Centronics

    BrettHallen/Sinclair

    Projects for Sinclair computers (ZX80, ZX81, TS1000, TS1500, TS2068, Spectrum and clones)

    18 parts5
  • 2 layers37 × 31 mmVDriveZ88 Serial Converter, the printed circuit board in 3D

    VDriveZ88 Serial Converter

    BrettHallen/Sinclair

    Projects for Sinclair computers (ZX80, ZX81, TS1000, TS1500, TS2068, Spectrum and clones)

    12 parts5
  • 2 layers100 × 50 mmZX80 Joypad, the printed circuit board in 3D

    ZX80 Joypad

    BrettHallen/Sinclair

    Projects for Sinclair computers (ZX80, ZX81, TS1000, TS1500, TS2068, Spectrum and clones)

    12 parts5
  • 2 layers26 × 22 mmVDriveZ88 Serial Converter SMD, the printed circuit board in 3D

    VDriveZ88 Serial Converter SMD

    BrettHallen/Sinclair

    Projects for Sinclair computers (ZX80, ZX81, TS1000, TS1500, TS2068, Spectrum and clones)

    11 parts5
  • 2 layers61.2 × 53.3 mmZX81 Expansion Breakout, the printed circuit board in 3D

    ZX81 Expansion Breakout

    BrettHallen/Sinclair

    Projects for Sinclair computers (ZX80, ZX81, TS1000, TS1500, TS2068, Spectrum and clones)

    6 parts5
  • 2 layers21 × 45 mmZX81 EPROM, the printed circuit board in 3D

    ZX81 EPROM

    BrettHallen/Sinclair

    Projects for Sinclair computers (ZX80, ZX81, TS1000, TS1500, TS2068, Spectrum and clones)

    5 parts5

Similar boards

  • 2 layers236.8 × 169.8 mmTK2000, the printed circuit board in 3D

    TK2000

    clemarfolly/Microdigital-TK2000

    Reprodução da PCB do TK-2000 da Microdigital, clone do Micro-Professor MPF-II

    212 parts17
  • 2 layers239.6 × 239.9 mmTK3000, the printed circuit board in 3D

    TK3000

    clemarfolly/TK3000

    Réplica do Microdigital TK3000

    329 parts7GPL-3.0
  • 2 layers94.3 × 128.5 mmLeaky bucket, the printed circuit board in 3D

    Leaky bucket

    tpcarlson/synth-diy

    Mostly Eurorack projects

    137 parts107
  • 2 layers231.1 × 106.7 mmSnark barker, the printed circuit board in 3D

    Snark barker

    schlae/snark-barker

    A 100% compatible replica of the famed SB 1.0 sound card

    199 parts687
  • 2 layers49.6 × 78.3 mmOdyssey, the printed circuit board in 3D

    Odyssey

    jotego/jtcores

    FPGA cores compatible with multiple arcade game machines and KiCAD schematics of arcade games. Working on MiSTer FPGA/Analogue Pocket

    24 parts346GPL-3.0
  • 2 layers182.9 × 172.7 mmMulti, the printed circuit board in 3D

    Multi

    homebrew8088/8088-PC-Compatible

    8088 PC XT Compatible

    120 parts238GPL-3.0
  • 2 layers365.1 × 203.2 mmDIAG, the printed circuit board in 3D

    DIAG

    Nakazoto/CenturionComputer

    This is just a simple backup of all the files related to the Centurion that I have stored on my HD. The Wiki itself has far more in-depth information about the Centurion and it's individual cards.

    150 parts172
  • 2 layers304.8 × 165.1 mmComix-35, the printed circuit board in 3D

    Comix-35

    schlae/comix-35

    The COMIX-35 is an improved clone of the COMX-35 1802 home computer

    173 parts138

Questions

How big is the ZX80 Pixel Sync PCB?

It measures 45 × 18 mm and has 2 copper layers, 1.6 mm thick.

What parts does the ZX80 Pixel Sync use?

7 parts, built around the 74LS74PC and BC548. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the ZX80 Pixel Sync KiCad files?

From the BrettHallen/Sinclair repository on GitHub, at the commit this page was made from: the board is ZX80_Pixel_Sync/ZX80_Pixel_Sync.kicad_pcb and its schematic VDriveZ88_Serial_Converter/SurfaceMount/VDriveZ88_Serial_Converter_SMD.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the ZX80 Pixel Sync design in my own project?

Its repository states no licence, so its author keeps all rights: ask BrettHallen before reusing the design.