
LogicAnalyzer
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software

A wireless status indicator system built with the XIAO ESP32C3. Designed for pairs who want to communicate their availability without interrupting each other's flow state.
Busy indicator is an open-source printed circuit board by brancengregory, from the brancengregory/busy-indicator repository on GitHub. It is a 2-layer board of 27.9 × 83.8 mm with 10 parts on 21 nets, routed with 22 tracks and 0 vias.
Its parts include 4 resistors, 4 diodes, 1 IC and 1 switch. It belongs with the ESP32 and RISC-V boards of this library.
A wireless status indicator system built with the XIAO ESP32C3. Designed for pairs who want to communicate their availability without interrupting each other's flow state.
The Busy Indicator is a simple, elegant solution to a common problem: knowing when your partner or colleague is available without the social pressure of asking. Each device has two sets of red/green LEDs:
When your partner presses their button to change status, your remote LEDs update automatically via ESP-NOW wireless communication.
The PCB is designed around the Seeed Studio XIAO ESP32C3 with:
| Function | GPIO |
|---|---|
| Local Red LED | GPIO3 |
| Local Green LED | GPIO4 |
| Remote Red LED | GPIO21 |
| Remote Green LED | GPIO20 |
| Button | GPIO10 |
The hardware design is in KiCad 9.0 format:
hardware/busy-indicator/busy-indicator.kicad_sch - Schematichardware/busy-indicator/busy-indicator.kicad_pcb - PCB layouthardware/busy-indicator/busy-indicator.kicad_pro - Project settingshardware/libs/XIAO_ESP32C3/ - XIAO ESP32C3 footprint and symbol library (git submodule)The firmware is written in Rust using the Embassy async framework:
The firmware uses an actor-model architecture with Embassy tasks:
state_manager): Pure state machine handling all state transitionsled_controller): Handles LED output with retry logicbutton_task): Button debouncing, press detection, and sleep controlesp_now_task): Wireless communication between devicesriscv32imc-unknown-none-elf targetespflash or cargo-espflash for flashing# Build and flash
cargo run --release
# Or flash pre-built binary
espflash flash target/riscv32imc-unknown-none-elf/release/busy-indicatorhardware/busy-indicator/busy-indicator.kicad_pcb in KiCadDevices automatically discover each other via ESP-NOW broadcast on channel 11. No manual pairing required - just power on two devices within range and they'll sync automatically.
busy-indicator/
├── src/
│ ├── bin/main.rs # Firmware entry point and task definitions
│ └── lib.rs # Library (currently empty, no_std marker)
├── hardware/
│ ├── busy-indicator/ # KiCad PCB design files
│ └── libs/ # Component libraries (XIAO_ESP32C3 submodule)
├── Cargo.toml # Rust dependencies
├── build.rs # Build script with helpful linker errors
└── .gitignore # Git ignore patterns for Rust + KiCadThis project is open source. See individual component licenses:
hardware/libs/XIAO_ESP32C3/LICENSE| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | LED | LED_THT:LED_D3.0mm | D1, D2, D3, D4 |
| 4 | R_US | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3, R4 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH-12mm | SW1 |
| 1 | XIAO ESP32C3 | XIAO_ESP32C3:xiao_esp32c3 | U1 |

gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software

byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch


OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C

rusefi/rusefi
rusefi - GPL internal combustion engine control unit

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
It measures 27.9 × 83.8 mm and has 2 copper layers, 1.6 mm thick.
10 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the brancengregory/busy-indicator repository on GitHub, at the commit this page was made from: the board is hardware/busy-indicator/busy-indicator.kicad_pcb and its schematic hardware/busy-indicator/busy-indicator.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask brancengregory before reusing the design.