

Voltage regulator
Design various voltage regulators for practicing purposes
- Size
- 26 × 53 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 34
- Nets
- 16
- Pads
- 73
- Tracks, vias
- 52, 47
- Pours
- 11
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 7 Oct 2025
- Updated
- 14 Nov 2025
Overview
Voltage regulator is an open-source printed circuit board by bquangDinh, from the bquangDinh/voltage-regulators repository on GitHub. It is a 2-layer board of 26 × 53 mm with 34 parts on 16 nets, routed with 52 tracks and 47 vias.
It is built around the AMS1117-3.3, TPS54302 and LD39200DPUR. Its parts include 9 capacitors, 7 resistors, 3 diodes, 3 connectors and 2 ICs. It belongs with the power boards of this library.
Main components
3AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsTPS54302
UncategorisedTexas InstrumentsLD39200DPUR
DFN-8(4x4)-40℃~+125℃ 1 100uA 2A 6V 70dB@(1kHz) Adjustable PG Pin、Over Current Protection、Over Temperature Protection、Reverse connection protection、Enable Positive DFN-8(4x4) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSSTMicroelectronicsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
Parts
34| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2, H3, H4 |
| 3 | 10u | Capacitor_SMD:C_0603_1608Metric | C3, C4, C5 |
| 3 | 1k5 | Resistor_SMD:R_0402_1005Metric | R5, R6, R7 |
| 3 | OUT_TP | Connector_Pin:Pin_D1.0mm_L10.0mm | TP2, TP4, TP8 |
| 3 | PWR | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1, J2, J3 |
| 2 | 100n | Capacitor_SMD:C_0402_1005Metric | C6, C7 |
| 2 | 22u | Capacitor_SMD:C_0805_2012Metric | C1, C2 |
| 2 | PWR_LED | LED_SMD:LED_0603_1608Metric | D2, D3 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 10p | Capacitor_SMD:C_0402_1005Metric | C8 |
| 1 | 10u | SamacSys_Parts:INDPM6965X300N | L1 |
| 1 | 13k3 | Resistor_SMD:R_0402_1005Metric | R4 |
| 1 | 1k | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 33u | Capacitor_SMD:C_0805_2012Metric | C9 |
| 1 | 49.9 | Resistor_SMD:R_0402_1005Metric | R2 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | GND_TP | Connector_Pin:Pin_D1.0mm_L10.0mm | TP9 |
| 1 | LD39200DPUR | SamacSys_Parts:SON80P400X400X100-9N-D | PS2 |
| 1 | PRW_LED | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | TPS54302 | Package_TO_SOT_SMD:SOT-23-6 | U2 |
Similar boards
- 6 layers176 × 70.2 mm

- 4 layers65.9 × 52.9 mm

- 4 layers76 × 76.9 mm

- 2 layers50 × 67 mm

- 4 layers75.5 × 78 mm

Current loop gen
andrzejkasica/CO-sensor
Project based on ME2-CO gas sensor with current loop and 2 relays output.
126 parts - 2 layers113.5 × 64 mm

- 2 layers100 × 100 mm

Hydroponics reservoir controller
bookofthefuture/hydroponics-pcb
KiCad PCB designs for the two-tier IKEA hydroponics monitoring/control system
82 parts - 4 layers100 × 82.6 mm

HV ECU
outlandnish/subaru-brz-hv-ecu
HV Power Management ECU for my Subaru BRZ EV Conversion
125 partsMIT
Questions
How big is the Voltage regulator PCB?
It measures 26 × 53 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Voltage regulator use?
34 parts, built around the AMS1117-3.3, TPS54302 and LD39200DPUR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Voltage regulator KiCad files?
From the bquangDinh/voltage-regulators repository on GitHub, at the commit this page was made from: the board is voltage-regulator.kicad_pcb and its schematic voltage-regulator.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Voltage regulator design in my own project?
Its repository states no licence, so its author keeps all rights: ask bquangDinh before reusing the design.