4 layers26 × 26 mm
4 layers48 × 48 mm
GigaStax PicoConnRevB
botblox/GigaStax-Rugged-PicoConnThe open source design files for GigaStax Rugged PicoConn
- Size
- 48 × 48 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 14
- Nets
- 65
- Pads
- 160
- Tracks, vias
- 4,815, 70
- Pours
- 9
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 9 Mar 2022
- Updated
- 9 Mar 2022
Overview
GigaStax PicoConnRevB is an open-source printed circuit board by botblox, from the botblox/GigaStax-Rugged-PicoConn repository on GitHub. It is a 4-layer board of 48 × 48 mm with 14 parts on 65 nets, routed with 4,815 tracks and 70 vias.
It is built around the 1.25T-8A, 1.25T-6A and 1.25T-4A, with the LSHM-140-03.0-L-DV-A-S-K-TR among its other parts.
Main components
4
1.25T-8A
插件,P=1.25mm-25℃~+85℃ 1 1.25mm 11.85mm 125V 1A 1x8P 3.2mm 4.8mm 8 8P Beige Brass Through Hole 插件,P=1.25mm Wire To Board Connector ROHSCAXWire To Board Connector
1.25T-6A
插件,P=1.25mm-25℃~+85℃ 1 1.25mm 1x6P 250V 3A 6 6P PBT PicoBlade(MX 1.25) Through Hole Tin UL94V-0 White 插件,P=1.25mm Wire To Board Connector ROHSBOOMELEWire To Board Connector
1.25T-4A
插件,P=1.25mm-25℃~+85℃ 1 1.25mm 125V 1A 1x4P 3.2mm 4 4.8mm 4P 6.85mm Beige Brass Through Hole 插件,P=1.25mm Wire To Board Connector ROHSCAXWire To Board Connector
LSHM-140-03.0-L-DV-A-S-K-TR
SMD,P=0.5mm-55℃~+125℃ 0.5mm 2 2A 80P Gold Phosphor bronze Surface Mount,Vertical SMD,P=0.5mm Board-to-Board and Backplane Connector ROHSSamtecBoard-To-Board And Backplane Connector
README
Design Files/README.mdGigaStax-Rugged-PicoConn
The open source design files for GigaStax Rugged PicoConn
The files here contain the schematic and PCB for GigaStax Rugged PicoConn, the breakout board for GigaStax Rugged. Links to both products are below.
https://www.botblox.io/products/gigastax-stackable-rugged-gigabit-switch-40-to-85-c https://www.botblox.io/products/gigastax-rugged-picoconn
To open these files, you will need to download KiCAD
Parts
14| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 1.25T-8A | Connector_Molex:Molex_PicoBlade_53047-0810_1x08_P1.25mm_Vertical | J2, J4, J5, J7, J8 |
| 4 | MountingHole | Kpk:MHM3_with_small_PAD | H1, H2, H3, H4 |
| 2 | 1.25T-6A | Connector_Molex:Molex_PicoBlade_53047-0610_1x06_P1.25mm_Vertical | J3, J9 |
| 1 | 1-84953-4 | Connector_FFC-FPC:TE_1-84953-4_1x14-1MP_P1.0mm_Horizontal | J10 |
| 1 | 1.25T-4A | Connector_Molex:Molex_PicoBlade_53047-0410_1x04_P1.25mm_Vertical | J6 |
| 1 | LSHM-140-03.0-L-DV-A-S-K-TR | Kpk:Samtec_LSHM-140-06.0-L-DV-A-S-TR_P0.50mm_Vertical | J1 |
Similar boards
- 4 layers36.3 × 36.3 mm
SwitchbloxPicoBaseBoardRevB
botblox/SwitchCore-Baseboard-Designs
The baseboard designs for SwitchCore
24 partsMIT - 4 layers15.2 × 9 mm
Sensors
StuckAtPrototype/Racer
These are structured into their own files. I could have used submodules, but decided against it.
14 parts3.8kApache-2.0 - 4 layers25.5 × 46.5 mm
TremorWatch
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
14 parts915 - 4 layers81 × 46 mm
XTMAX PCB
MicroCoreLabs/Projects
Ted Fried's MicroCore Labs Projects - FPGA CPU cores and emulators for the 8088, 8086, 8051, 6502, 68000, Z80, Risc-V, and also Typewriter and EPROM Emulator projects.
14 parts534 - 4 layers22 × 42 mm
- 4 layers64 × 46.5 mm
DSC Scan Selector
nanographs/Open-Beam-Interface
Just what you need to control the beam and get an image.
14 parts371 - 4 layers65.2 × 61.4 mm
Pi 400 gpio breakout
CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.
14 parts253GPL-3.0
Questions
How big is the GigaStax PicoConnRevB PCB?
It measures 48 × 48 mm and has 4 copper layers, 1.6 mm thick.
What parts does the GigaStax PicoConnRevB use?
14 parts, built around the 1.25T-8A, 1.25T-6A, 1.25T-4A and LSHM-140-03.0-L-DV-A-S-K-TR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the GigaStax PicoConnRevB KiCad files?
From the botblox/GigaStax-Rugged-PicoConn repository on GitHub, at the commit this page was made from: the board is Design Files/GigaStax-PicoConnRevB.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the GigaStax PicoConnRevB design in my own project?
Its repository states no licence, so its author keeps all rights: ask botblox before reusing the design.