2 layers153.7 × 71.1 mm
WMS
bostang/PSoC6
Repository untuk program yang dijalankan pada PSoC6 (belajar dan hands-on project)
32 parts
2 layers180 × 146 mm
Repository untuk program yang dijalankan pada PSoC6 (belajar dan hands-on project)
- Size
- 180 × 146 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 33
- Nets
- 100
- Pads
- 305
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 7 (file 20221018)
- Created
- 2 Dec 2023
- Updated
- 3 Jul 2024
Overview
WMS is an open-source printed circuit board by bostang, from the bostang/PSoC6 repository on GitHub. It is a 2-layer board of 180 × 146 mm with 33 parts on 100 nets.
Its parts include 7 ICs, 5 connectors, 4 resistors, 4 switches and 2 diodes.
README
README.mdPSoC6
Repository untuk program yang dijalankan pada PSoC6 (belajar dan hands-on project)
Pranala Penting
Parts
33| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2, H3, H4, H5, H6, H7, H8 |
| 4 | R | Resistor_SMD:R_0805_2012Metric | R1, R2, R3, R4 |
| 2 | Conn_01x40_Socket | Connector_PinHeader_2.54mm:PinHeader_1x40_P2.54mm_Vertical | J1, J2 |
| 2 | Conn_02x06_Odd_Even | Connector_JST:JST_PHD_B12B-PHDSS_2x06_P2.00mm_Vertical | J4, J5 |
| 2 | LED | LED_SMD:LED_0805_2012Metric | D1, D2 |
| 2 | SW_Push_Open | Button_Switch_THT:SW_PUSH_6mm_H9.5mm | SW1, SW3 |
| 1 | Battery | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | BT1 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | Conn_01x03_Socket | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | SSD1306 | WMS_components:128x64OLED_v2 | Brd1 |
| 1 | SW_Push_DPDT | Button_Switch_THT:SW_E-Switch_EG2219_DPDT_Angled | SW2 |
| 1 | SW_SPDT | Button_Switch_THT:SW_E-Switch_EG1224_SPDT_Angled | SW4 |
| 1 | ~ | WMS_components:GM67_Barcode_Scanner | U4 |
| 1 | ~ | WMS_components:TP4056-18650_v2 | U3 |
| 1 | ~ | WMS_components:YR903_RFID_Scanner_FPC | U7 |
| 1 | ~ | WMS_components:CY8CPROTO-062-4343W_v2 | U6 |
| 1 | ~ | WMS_components:Quad_SPI_flash_microSD_v2 | U5 |
| 1 | ~ | WMS_components:YX850_v2 | U1 |
| 1 | ~ | WMS_components:MT3608_module_v2 | U2 |
More from bostang/PSoC6
6- 2 layers138.6 × 64.2 mm
WMS
bostang/PSoC6
Repository untuk program yang dijalankan pada PSoC6 (belajar dan hands-on project)
30 parts - 2 layers138.6 × 64.2 mm
WMS
bostang/PSoC6
Repository untuk program yang dijalankan pada PSoC6 (belajar dan hands-on project)
28 parts - 2 layers77 × 54.6 mm
WMS PCB2
bostang/PSoC6
Repository untuk program yang dijalankan pada PSoC6 (belajar dan hands-on project)
18 parts - 2 layers66.3 × 146.8 mm
WMS PCB1
bostang/PSoC6
Repository untuk program yang dijalankan pada PSoC6 (belajar dan hands-on project)
14 parts - 2 layers50.2 × 134.8 mm
WMS Scanner
bostang/PSoC6
Repository untuk program yang dijalankan pada PSoC6 (belajar dan hands-on project)
8 parts
Similar boards
- 2 layers65 × 30 mm
Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
33 parts1kGPL-3.0 - 2 layers127 × 96 mm
Amiga gfxcard
mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog
33 parts1k - 2 layers92.7 × 58.4 mm
Hacky holidays
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
33 parts915 - 2 layers240 × 120 mm
Quiver PDB 01
Arrow-air/project-quiver
Project Quiver documentation, designs, and project artifacts.
33 parts617CERN-OHL-S-2.0 - 2 layers75 × 26 mm
DIY detector
ozel/DIY_particle_detector
A mobile low-cost spectrometer for measuring radioactivity and the energy of ionising radiation like alpha particles and electrons
33 parts558BSD-2-Clause - 2 layers100 × 50 mm
Pixelix
BlueAndi/Pixelix
Full RGB LED matrix, based on an ESP32 and WS2812B LEDs or emulated LEDs on TFT.
33 parts447MIT - 2 layers99.1 × 71.1 mm
CONTROLLER Standby Instrument
jrsteensen/OpenHornet
OpenHornet 1:1 F/A-18C Simulator Repository
33 parts431 - 2 layers65 × 30 mm
Questions
How big is the WMS PCB?
It measures 180 × 146 mm and has 2 copper layers, 1.6 mm thick.
What parts does the WMS use?
33 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the WMS KiCad files?
From the bostang/PSoC6 repository on GitHub, at the commit this page was made from: the board is PCB/WMS/WMS_v1/WMS.kicad_pcb and its schematic PCB/WMS/WMS_v1 - layouted/DataAcquisition.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the WMS design in my own project?
Its repository states no licence, so its author keeps all rights: ask bostang before reusing the design.