2 layers98 × 27 mm
2 layers14 × 12.7 mm
FilpperZero Gameboy Link V2
BoredModder/FilpperZero_Gameboy_Link30A module for the Flipper Zero to connect to the Gameboy via the link port
- Size
- 14 × 12.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 5
- Nets
- 8
- Pads
- 18
- Tracks, vias
- 24, 0
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 27 Feb 2024
- Updated
- 27 Feb 2024
Overview
FilpperZero Gameboy Link V2 is an open-source printed circuit board by BoredModder, from the BoredModder/FilpperZero_Gameboy_Link repository on GitHub, published under the CC0-1.0 licence. It is a 2-layer board of 14 × 12.7 mm with 5 parts on 8 nets, routed with 24 tracks and 0 vias.
Its parts include 2 resistors, 2 connectors and 1 diode. It belongs with the retro computing and games boards of this library.
README
readme.mdFlipper Zero: Gameboy Link Port Module
This is a module I worked on as a project to learn about PCB design, but to also learn about KiCAD, which is the program that was used to create this. I used GAME BOY Pokemon Trading MALVEKE to create this. Check is out because he is a way smarter guy than I.
If you want a simple way to get the PCB it is up in OshPark.
I use his GPIO layout so you will want to do the same on your flipper zero. If you use his Pokemon app in flipper.net then it will be the under "Select Pinout" > "Original".
Copied shamelessly off of his Github.
| Cable Game Link (Socket) | Flipper Zero GPIO |
|---|---|
| 6 (GND) | 8 (GND) |
| 5 (CLK) | 6 (B2) |
| 3 (SI) | 7 (C3) |
| 2 (SO) | 5 (B3) |
Bill of Materials (BOM)
Parts
5| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 0022232041 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | 150 | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 33k | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | LED | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | LINKPORTCGB-LINK | MGBC-MBL-01_2_0:CGB-LINK | P1 |
Questions
How big is the FilpperZero Gameboy Link V2 PCB?
It measures 14 × 12.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the FilpperZero Gameboy Link V2 use?
5 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the FilpperZero Gameboy Link V2 KiCad files?
From the BoredModder/FilpperZero_Gameboy_Link repository on GitHub, at the commit this page was made from: the board is FilpperZero_Gameboy_Link_V2.kicad_pcb and its schematic FilpperZero_Gameboy_Link_V2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the FilpperZero Gameboy Link V2 design in my own project?
Its repository publishes it under the CC0-1.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers21 × 33 mm
24g2usb pico2w
joypad-ai/joypad-os
Universal controller firmware for building adapters, dongles, and custom controllers.
5 parts1.7kApache-2.0 - 2 layers53.2 × 59.6 mm
A10 OLinuXino Lime Rev B SHIELD TEMPLATE
OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C
5 parts1.5k - 2 layers30 × 11 mm
Main control board servo tester
jamro/tiny-engineer
A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.
5 parts1.1k - 2 layers78.8 × 35.3 mm
KiCadTest
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
5 parts915 - 2 layers50 × 23 mm
- 2 layers43.2 × 28.5 mm
- 2 layers20.3 × 15.2 mm
L0 light sensor
Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
5 parts546MIT