4 layers50 × 168 mm
4 layers85 × 56 mm
V link hat
BoostedMoose/v-link-hat6Official repository of the V-Link HAT
- Size
- 85 × 56 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 96
- Nets
- 114
- Pads
- 373
- Tracks, vias
- 716, 333
- Pours
- 34
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 16 May 2025
- Updated
- 16 May 2025
Overview
V link hat is an open-source printed circuit board by BoostedMoose, from the BoostedMoose/v-link-hat repository on GitHub. It is a 4-layer board of 85 × 56 mm with 96 parts on 114 nets, routed with 716 tracks and 333 vias.
It is built around the SN65HVD230DR, MCP2004-E/SN and ADS1115IDGSR, with the TPS568215RNNR, MCP2515-I and SN74LVC1G14DRLR among its other parts. Its parts include 32 capacitors, 24 resistors, 13 ICs, 4 transistors and 3 connectors.
Main components
12
SN65HVD230DR
SOP-8CAN TransceiversTokmasMCP2004-E/SN
SOIC-8-40℃~+125℃ 1 1 15uA 175mV 6V~27V Half-Duplex Transceiver ±8kV SOIC-8 LIN Transceivers ROHSMicrochip TechnologyLIN Transceivers
ADS1115IDGSR
VSSOP-10-40℃~+125℃ 16 1LSB 2 2.048V 2V~5.5V 500nA 860Hz 8Hz、16Hz、32Hz、64Hz、128Hz、250Hz、475Hz、860Hz Built-in Built-in I2C Sigma-Delta Support Yes VSSOP-10 Analog to Digital Converters (ADC) ROHSTexas InstrumentsAnalog To Digital Converters (ADC)
TPS568215RNNR
VQFN-18-HR(3.5x3.5)-40℃~+150℃@(TJ) 1 1.2MHz 4.5V~17V 600mV~5.5V 700uA 8A Adjustable Buck Built-in Overcurrent Protection、Light load efficient mode、Output discharge、Adjustable soft-start、Operating status indication、Cycle-by-cycle current limiting、Adjustable current limiting、Hiccup current limiting、Built-in LDO regulator Step-down type Yes VQFN-18-HR(3.5x3.5) DC-DC Converters ROHSTexas InstrumentsDC-DC Converters
MCP2515-I
TSSOP-20-40℃~+85℃ 1Mbps 1uA 2.7V~5.5V 5mA CAN Controller SPI TSSOP-20 CAN Controllers ROHSTokmasCAN Controllers
SN74LVC1G14DRLR
SOT-553-40℃~+125℃ 1 1.16V~3.33V 1.2V~3.8V 1.65V~5.5V 100mV~550mV 10uA 32mA 32mA 390mV~1.87V 6.5ns@2.5V,50pF 74LVC Power shutdown protection、Noise suppression function Push-pull Schmitt trigger SOT-553 Inverters ROHSTexas InstrumentsInverters
TLP2361(TPL,E
SO-5-40℃~+125℃ 1 1.5V 1.6mA 10mA 10mA 15Mbps 2.7V~5.5V 20kV/us 20mW 3.75kV 5V 6V 80ns 80ns DC SO-5 Logic Output Optoisolators ROHSToshibaLogic Output OptoisolatorsTXS0108EPWR
UncategorisedUnknown maker
BC848B
SOT-23-65℃~+150℃ 1 NPN 100MHz 100mA 200 200mV 250mW 30V 5V 5uA NPN SOT-23 Bipolar (BJT) ROHSNexperiaBipolar (BJT)
DZ254R-11-02-63
插件,P=2.54mm1 1x2P 2.54mm 2.54mm 2P 3A 3mm 6mm Black Brass Gold Pin Header Through Hole 插件,P=2.54mm Pin Headers ROHSDEALONPin Headers2N7002_R1_00001
SOT-23-55℃~+150℃ 1 N-channel 1V 250mA 25pF 350mW 50pF 5pF 60V 7.5Ω@4.5V 700pC@15V N-Channel ±20V SOT-23 MOSFETs ROHSPANJIT InternationalMOSFETs
DZ254R-11-04-63
插件,P=2.54mm1 1x4P 2.54mm 2.54mm 3A 3mm 4P 6mm Black Brass Gold Pin Header Through Hole 插件,P=2.54mm Pin Headers ROHSDEALONPin Headers
Parts
96| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 100nF | C0603 | C2, C3, C4, C5, C7, C8, C14, C22, C23, C24, C27, C41 |
| 8 | 10kΩ | R0603 | R5, R9, R11, R16, R17, R21, R22, R32 |
| 6 | 100uF | C1206 | C1, C32, C33, C34, C35, C37 |
| 6 | 10uF | C0805 | C15, C19, C20, C21, C28, C39 |
| 4 | 22pF | C0402 | C10, C11, C12, C13 |
| 3 | 50362462 | CONN-TH_50362462 | CN1, CN2, CN4 |
| 3 | BC848B | SOT-23-3_L2.9-W1.6-P1.90-LS2.8-BR | Q1, Q5, Q7 |
| 3 | DZ254R-11-02-63 | HDR-TH_2P-P2.54-V-M-1 | H2, H3, H4 |
| 2 | 100nF | C0402 | C6, C9 |
| 2 | 120Ω | R0805 | R15, R18 |
| 2 | 16MHz | OSC-SMD_L5.0-W3.2 | X1, X2 |
| 2 | 1kΩ | R0402 | R3, R31 |
| 2 | 27kΩ | R0402 | R2, R8 |
| 2 | 4.7kΩ | R0402 | R4, R6 |
| 2 | MCP2515-I | TSSOP-20_L6.5-W4.4-P0.65-LS6.4-BL | U11, U14 |
| 2 | SN65HVD230DR | SOIC-8_L4.9-W3.9-P1.27-LS6.0-BL | U9, U10 |
| 2 | TYPE-C 6P(073) | TYPE-C-SMD_TYPE-C-6P | USB1, USB2 |
| 1 | 120kΩ | R0402 | R13 |
| 1 | 1MΩ | R0402 | R1 |
| 1 | 2.2kΩ | R0805 | R19 |
| 1 | 2.2uF | C0603 | C25 |
| 1 | 2.2uH | IND-SMD_L8.0-W8.0-1 | L3 |
| 1 | 20kΩ | R0402 | R24 |
| 1 | 2N7002_R1_00001 | SOT-23-3_L2.9-W1.3-P1.90-LS2.4-BR | Q4 |
| 1 | 2kΩ | R0603 | R30 |
| 1 | 5.6kΩ | R0402 | R7 |
| 1 | 50pF | C0402 | C26 |
| 1 | 52.3kΩ | R0603 | R23 |
| 1 | 75kΩ | R0603 | R10 |
| 1 | ADS1115IDGSR | MSOP-10_L3.0-W3.0-P0.50-LS5.0-BL | U5 |
| 1 | DIP-4_L6.5-W4.6-P2.54-LS7.6-BL | DIP-4_L6.5-W4.6-P2.54-LS7.6-BL | U13 |
| 1 | DZ254R-11-04-63 | HDR-TH_4P-P2.54-V-M | H1 |
| 1 | FDD4685_C5371004 | TO-252-3_L6.6-W6.1-P4.57-LS9.9-BR-CW | U1 |
| 1 | MCP2004-E/SN | SOIC-8_L4.9-W3.9-P1.27-LS6.0-BL | U2 |
| 1 | MMZ2012R102AT000 | L0805 | L2 |
| 1 | Pad_gge54079 | Pad_gge54079 | Pad_gge54079 |
| 1 | Pad_gge54130 | Pad_gge54130 | Pad_gge54130 |
| 1 | Pad_gge54154 | Pad_gge54154 | Pad_gge54154 |
| 1 | Pad_gge54178 | Pad_gge54178 | Pad_gge54178 |
| 1 | Pad_gge54202 | Pad_gge54202 | Pad_gge54202 |
| 1 | Pad_gge54226 | Pad_gge54226 | Pad_gge54226 |
| 1 | Pad_gge90525 | Pad_gge90525 | Pad_gge90525 |
| 1 | Pad_gge90570 | Pad_gge90570 | Pad_gge90570 |
| 1 | RASPBERRY PI 4B | RASPBERRY PI 4B | U8 |
| 1 | SN74LVC1G14DRLR | SOT-553-5_L1.6-W1.2-P0.50-LS1.6-TL | U6 |
| 1 | SS52BF | SMBF_L4.3-W3.6-LS5.3-RD | D1 |
| 1 | TLP2361(TPL,E | OPTO-SMD-5_L3.7-W4.6-P1.27-LS7.0-BR | U3 |
| 1 | TPS568215RNNR | VQFN-HR-18_L3.5-W3.5-P0.55-BL_TPS56C215RNNR | U7 |
| 1 | TXS0108EPWR | TSSOP-20_L6.5-W4.4-P0.65-LS6.4-BL | U4 |
| 1 | XF-508P-B-B | FUSE-TH_4P-L16.0-W6.7 | F2 |
Questions
How big is the V link hat PCB?
It measures 85 × 56 mm and has 4 copper layers, 1.6 mm thick.
What parts does the V link hat use?
96 parts, built around the SN65HVD230DR, MCP2004-E/SN, ADS1115IDGSR and TPS568215RNNR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the V link hat KiCad files?
From the BoostedMoose/v-link-hat repository on GitHub, at the commit this page was made from: the board is v-link-hat.kicad_pcb and its schematic v-link-hat.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the V link hat design in my own project?
Its repository states no licence, so its author keeps all rights: ask BoostedMoose before reusing the design.
Similar boards
- 6 layers160 × 160.1 mm
ChromaDeck
FBIopeningUPP/ChromaDeck
ChromaDeck is a massive, open-source, fully custom USB MIDI Control Surface designed for streaming, video editing, and live audio mixing.
152 partsMIT - 4 layers41.3 × 55 mm
Home automation module std
stephaneamans/app-home_automation
The general principle is based on a centralised ECU (Raspbery Pi) with an optional coprpocessor (STM32) used to manage low speed IO.
73 parts - 6 layers62.1 × 56.2 mm
- 2 layers65 × 36 mm
- 2 layers60 × 100 mm
- 2 layers20 × 20 mm
B TPiS 1S 1385
Boardoza/Boardoza_Excelitas_TPiS_1S_1385_IR_Presence_Motion_Detection_Breakout
TPiS1385 IR Thermopile Sensor for Contactless Temperature Measurement Breakout Board.
15 parts1CC-BY-SA-4.0 - 2 layers20 × 20 mm
B IrDA Transceiver BRK R1.0
Boardoza/Boardoza_IrDA_Transceiver_Infrared_Wireless_Communication_Breakout_Board
Compact infrared transceiver breakout board for short-range asynchronous wireless serial communication.
18 partsCC-BY-SA-4.0