2 layers216.9 × 86.8 mm
Sweepbling lp pcb
davidphilipbarr/Sweep
Sweep - a small promicro based keyboard inspired by the Ferris.
59 parts2.1k
2 layers113 × 61.5 mm
Agbaixo PCB
bongarbit-org/agbaixoBaixe e instale o Arduino na versão legado (1.8.x) em https://www.arduino.cc/en/software
- Size
- 113 × 61.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 59
- Nets
- 44
- Pads
- 139
- Tracks, vias
- 242, 0
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 24 Mar 2026
- Updated
- 24 Mar 2026
Overview
Agbaixo PCB is an open-source printed circuit board by bongarbit-org, from the bongarbit-org/agbaixo repository on GitHub, published under the MIT licence. It is a 2-layer board of 113 × 61.5 mm with 59 parts on 44 nets, routed with 242 tracks and 0 vias.
Its parts include 39 connectors, 16 diodes and 4 resistors.
README
README.mdAgbaixo
Instrumento Agbaixo, em processo de criação pelo BongarBit
Para mandar o código para o Arduino:
Baixe e instale o Arduino na versão legado (1.8.x) em https://www.arduino.cc/en/software
Abra o programa Arduino (Arduino IDE)
Instale as bibliotecas colocando no diretório onde o Arduino for instalado, dentro da pasta libraries, todas as pastas que estão em Arduino/libraries deste repositório.
Na IDE do Arduino, vá nas configurações (File > Preferences) e adicione o texto na caixa de texto "Additional Board Manager URLs" o seguinte link: https://raw.githubusercontent.com/sparkfun/Arduino_Boards/main/IDE_Board_Manager/package_sparkfun_index.json
Vá em Tools>Board>Boards Manager e faça uma busca por Sparkfun AVR Boards e clique no botão "Install"
Vá em Tools>Board> e selecione a placa Arduino Pro Micro
Vá em Tools>Processor: e selecione o "ATmega 32u4 (5v, 16MHz)"
Identifique quais opções existem em Tools>Port>
Conecte o arduino no USB do computador
Note qual foi a opção nova que apareceu no submenu Tools>Port> e selecione ela
Abra o arquivo Arduino/agbaixo/agbaixo.ino e clique na barra de ferramentas da IDE do Arduino no botão "Upload" (o segundo da esquerda pra direita)
Se tudo der certo o código será enviado para a memória do Arduino.
Parts
59| Qty | Value | Footprint | References |
|---|---|---|---|
| 20 | Conn_01x02_Socket | Connector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | J3, J5, J10, J11, J12, J13, J14, J15, J16, J17, J18, J19, J20, J21, J22, J23 +4 |
| 16 | Conn_01x02_Pin | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J24, J25, J26, J27, J28, J29, J30, J31, J32, J33, J34, J35, J36, J37, J38, J39 |
| 16 | D | Diode_THT:D_T-1_P5.08mm_Horizontal | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14, D15, D16 |
| 4 | 220R | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1, R2, R3, R4 |
| 2 | Conn_01x12_Socket | Connector_PinSocket_2.54mm:PinSocket_1x12_P2.54mm_Vertical | J1, J2 |
| 1 | Conn_01x03_Socket | Connector_JST:JST_EH_B3B-EH-A_1x03_P2.50mm_Vertical | J4 |
Similar boards
- 2 layers132.3 × 94.9 mm
- 2 layers100 × 24 mm
STM32 Klipper Expander
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
59 parts1.1kGPL-3.0 - 2 layers77.5 × 20.4 mm
- 2 layers80 × 110 mm
NucDeck Left Controller PCB
dmcke5/NucDeck
The Open Source DIY Handheld Gaming PC!
59 parts561CERN-OHL-S-2.0 - 2 layers100 × 96 mm
Backlight
jackw01/scanlight
A better light source for scanning color negative film
59 parts397CERN-OHL-W-2.0 - 2 layers95.3 × 100 mm
Beyblock20
ChrisChrisLoLo/beyblock20
The magnetic, modular, 20-key macropad that can join together to form an ortholinear board
59 parts335GPL-3.0 - 2 layers94 × 94.5 mm
Vikropad
sadekbaroudi/vik
This is a VIK module designed to mount a PER56 scroll ring, with a 35mm Cirque Trackpad and optional WS2812B LEDs.
59 parts220CERN-OHL-P-2.0
Questions
How big is the Agbaixo PCB PCB?
It measures 113 × 61.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Agbaixo PCB use?
59 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Agbaixo PCB KiCad files?
From the bongarbit-org/agbaixo repository on GitHub, at the commit this page was made from: the board is Circuito/Agbaixo_PCB.kicad_pcb and its schematic Circuito/Agbaixo_PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Agbaixo PCB design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).