

Esr pr4 n
A redesigned PCB for the original ESR-PR4 ESR meter
- Size
- 64.5 × 39.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 87
- Nets
- 65
- Pads
- 241
- Tracks, vias
- 568, 146
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 12 May 2025
- Updated
- 5 Jun 2026
Overview
Esr pr4 n is an open-source printed circuit board by bogdancandea, from the bogdancandea/New_ESR_PR4 repository on GitHub. It is a 2-layer board of 64.5 × 39.9 mm with 87 parts on 65 nets, routed with 568 tracks and 146 vias.
It is built around the ATMEGA8L-8AU, AMS1117-5.0 and BC807, with the BC817 and 1N4148W among its other parts. Its parts include 33 resistors, 9 capacitors, 7 diodes, 6 transistors and 2 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
5ATMEGA8L-8AU
TQFP-32(7x7)-40℃~+85℃ 10bit 1KB 2.7V~5.5V 23 512Byte 8 Bit 8KB 8MHz AVR Built-in FLASH TQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)AMS1117-5.0
SOT-223-40℃~+125℃ 1 1.3V 15V 1A 5V 60dB Fixed Positive Short Circuit Protection、Thermal shutdown SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsBC807
SOT-23-65℃~+150℃ 1 PNP 100 100nA 345mW 45V 500mA 5V 700mV 80MHz PNP SOT-23 Bipolar (BJT) ROHSNexperiaBipolar (BJT)BC817
SOT-231 NPN 100nA 150MHz 300mW 40 45V 500mA 5V 700mV NPN SOT-23 Bipolar (BJT) ROHSShikuesBipolar (BJT)1N4148W
SOD-123150mA 1A 1V@50mA 1uA@75V 400mW 4ns 75V Independent SOD-123 Switching Diodes ROHSSTMicroelectronicsSwitching Diodes
README
README.mdNew_ESR_PR4
A redesigned PCB for the original ESR-PR4 ESR meter
Back in 2023, my ESR-PR4 broke due to an error (I measured a charged capacitor). My first thought was: oh well, it served me well until now—I'll just get another one. Identical. However, over the years, the manufacturer had stopped production, and even the website had disappeared.
With some information from specialized forums and with the help of https://web.archive.org, I managed to access an archived version of the website that used to sell the product:
https://web.archive.org/web/20180327142201/http://x-roast.home.ro/
At that time, the author had published both the schematic and the software written for the microcontroller. So I was able to repair my device by replacing and reprogramming the microcontroller.
That’s when I got the idea to republish the information. Since the original information did not include the PCB, I designed a PCB version so that electronics enthusiasts could build the device themselves.
The author of the schematic and the software is unknown to me. I am using and republishing this information because it was publicly available at x-roast.home.ro. I have no commercial interest whatsoever.
There is a mismatch between the original schematic and the HEX file: pins 10 and 11 of the microcontroller are swapped. The first unit I built had a few errors, including the swapped pins 10 and 11, which were fixed by cutting PCB traces and soldering wires.
The published version has already been corrected.
A new, smaller PCB version is currently in development, which I will publish only after I have had the chance to test it.
Parts
87| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R15, R16, R17, R19, R20, R22, R30, R31, R33 |
| 8 | 470 | Resistor_SMD:R_0603_1608Metric | R21, R23, R24, R25, R26, R27, R28, R29 |
| 6 | BC807 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3, Q4, Q5, Q6 |
| 6 | BC817 | Package_TO_SOT_SMD:SOT-23 | QT1, QT2, QT3, QT4, QT5, QT6 |
| 5 | 100n | Capacitor_SMD:C_0603_1608Metric | C2, C5, C6, C7, C9 |
| 4 | 1N4148W | Diode_SMD:D_SOD-123 | D3, D4, D5, D6 |
| 4 | 2k2 | Resistor_SMD:R_0603_1608Metric | R6, R8, R14, R18 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad_TopBottom | H1, H2, H3, H4 |
| 3 | WL-T7DS | Display_7Segment:7SegmentLED_LTS6760_LTS6780 | AFF1, AFF2, AFF3 |
| 2 | 100 | Resistor_SMD:R_0603_1608Metric | R5, R11 |
| 2 | 1N4007 | Diode_THT:D_DO-201_P12.70mm_Horizontal | D1, D2 |
| 2 | 1k | Resistor_SMD:R_0603_1608Metric | R2, R10 |
| 2 | 220 | Resistor_SMD:R_0603_1608Metric | R7, R12 |
| 2 | 22u | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | CP3, CP5 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 100n/10V | Capacitor_SMD:C_0603_1608Metric | C4 |
| 1 | 100u | Capacitor_THT:CP_Radial_D10.0mm_P2.50mm_P5.00mm | CP2 |
| 1 | 10u / 25V | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | CP1 |
| 1 | 10u/10V | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | CP4 |
| 1 | 1N4007 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D7 |
| 1 | 1u/10V | Capacitor_SMD:C_0603_1608Metric | C3 |
| 1 | 200 | Potentiometer_THT:Potentiometer_Runtron_RM-065_Vertical | RV1 |
| 1 | 220k | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 33n | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 470k | Resistor_SMD:R_0603_1608Metric | R32 |
| 1 | 470n | Capacitor_SMD:C_0603_1608Metric | C8 |
| 1 | 680 | Resistor_SMD:R_0603_1608Metric | R13 |
| 1 | 6k8 | Resistor_SMD:R_0603_1608Metric | R9 |
| 1 | AMS1117-5.0 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | ATmega8L-8A | Package_QFP:TQFP-32_7x7mm_P0.8mm | U2 |
| 1 | GND | TestPoint:TestPoint_Pad_D3.0mm | GND |
| 1 | ISP_5V | TestPoint:TestPoint_Pad_D1.5mm | +5V |
| 1 | ISP_GND | TestPoint:TestPoint_Pad_D1.5mm | GND |
| 1 | ISP_MISO | TestPoint:TestPoint_Pad_D1.5mm | MISO |
| 1 | ISP_MOSI | TestPoint:TestPoint_Pad_D1.5mm | MOSI |
| 1 | ISP_RESET | TestPoint:TestPoint_Pad_D1.5mm | RST |
| 1 | ISP_SCK | TestPoint:TestPoint_Pad_D1.5mm | SCK |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW1 |
| 1 | Test+ | TestPoint:TestPoint_Pad_D3.0mm | Test |
| 1 | Test- | TestPoint:TestPoint_Pad_D3.0mm | Test |
| 1 | V_in | TestPoint:TestPoint_Pad_D3.0mm | Vin |
More from bogdancandea/New_ESR_PR4
1- 2 layers90 × 45 mm

Similar boards
- 2 layers120.1 × 46 mm

- 2 layers44 × 16 mm

- 4 layers309.5 × 145 mm

Micro HIL v0.1
danielsimonreinhardt/microHIL
microHIL is a self-developed testing device for setting up a basic hardware-in-the-loop environment
396 partsMIT - 2 layers74.9 × 61 mm

- 2 layers100 × 100 mm

DC line module+Meter probe
kwiecinski/BMS-and-offgrid-photovoltaic-management-system
Project contains BMS for lead-acid batteries and ESP-based board used to pull information from EASUN offgrid inverter, energy meters and sensors.
100 parts3MIT - 2 layers106 × 65 mm

- 2 layers78.3 × 80.5 mm

Mesa mezclas
mariomp14/mixing_table
This desing has some errors! If you want do the the project you have to change some things. During the explain the errors will be pointed out and explained.
87 parts - 2 layers95 × 78 mm

AMP8611
dmsd-lab/AMP8611
AMP8611 - open hardware integrated stereo power amplifier with a 2-channel input selector, PGA2311 digital volume control and LM3886 power stages
56 partsCERN-OHL-S-2.0
Questions
How big is the Esr pr4 n PCB?
It measures 64.5 × 39.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Esr pr4 n use?
87 parts, built around the ATMEGA8L-8AU, AMS1117-5.0, BC807 and BC817. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Esr pr4 n KiCad files?
From the bogdancandea/New_ESR_PR4 repository on GitHub, at the commit this page was made from: the board is new_esr_pr4/kicad files v2/esr_pr4_n.kicad_pcb and its schematic new_esr_pr4/kicad files v1/esr_pr4.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Esr pr4 n design in my own project?
Its repository states no licence, so its author keeps all rights: ask bogdancandea before reusing the design.