2 layers29.3 × 51.8 mm
2 layers30 × 65 mm
Rpi doorbot
bodgery/rpi_doorbot- Size
- 30 × 65 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 20
- Nets
- 37
- Pads
- 84
- Tracks, vias
- 117, 8
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 5 Apr 2024
- Updated
- 5 Apr 2024
Overview
Rpi doorbot is an open-source printed circuit board by bodgery, from the bodgery/rpi_doorbot repository on GitHub. It is a 2-layer board of 30 × 65 mm with 20 parts on 37 nets, routed with 117 tracks and 8 vias.
It is built around the L7805 and NDT3055. Its parts include 5 resistors, 4 connectors, 2 capacitors, 2 diodes and 1 IC.
Main components
2
L7805
TO-220ST0℃~+125℃@(Tj) 1 1.2A 20V 2V@(1A) 42uV 500uA 5V 73dB@(120Hz) Fixed Positive Short Circuit Protection TO-220ST Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSOSENVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
NDT3055
SOT-223-4-65℃~+150℃ 1 N-channel 100mΩ@10V 100pF 15nC@10V 250pF 25W 30pF 4A 4V 60V N-Channel SOT-223 MOSFETs ROHSonsemiMOSFETs
README
README.mdRPi doorbot software and hat
Parts
20| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_2.7mm_M2.5_Pad | H1, H2, H3, H4 |
| 2 | 1k | Resistor_SMD:R_1210_3225Metric | R4, R6 |
| 2 | 2k | Resistor_SMD:R_1210_3225Metric | R5, R7 |
| 1 | 10uF | Capacitor_SMD:C_1206_3216Metric | C2 |
| 1 | 1K | Resistor_SMD:R_1210_3225Metric | R1 |
| 1 | 22uF | Capacitor_SMD:C_1206_3216Metric | C1 |
| 1 | Barrel_Jack | Terminal_Blocks:TerminalBlock_Pheonix_MKDS1.5-2pol | J3 |
| 1 | Conn_01x02_Female | Terminal_Blocks:TerminalBlock_Pheonix_MKDS1.5-2pol | J2 |
| 1 | Conn_01x07_Male | Pin_Headers:Pin_Header_Straight_1x07 | J1 |
| 1 | D_Schottky | Diode_SMD:D_1206_3216Metric | D3 |
| 1 | L7805 | TO_SOT_Packages_THT:TO-220_Neutral123_Vertical | U1 |
| 1 | LED | LED_SMD:LED_1206_3216Metric | D1 |
| 1 | NDT3055 | Package_TO_SOT_SMD:SOT-223 | Q1 |
| 1 | Raspberry_Pi_2_3 | Connector_PinHeader_2.54mm:PinHeader_2x20_P2.54mm_Vertical | J4 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_PTS645 | SW1 |
Similar boards
- 2 layers40.6 × 110 mm
Europi surface mount
Allen-Synthesis/EuroPi
EuroPi: A reprogrammable Eurorack module based on the Raspberry Pi Pico
92 parts584CC0-1.0 - 2 layers132.1 × 45.7 mm
IPoS
peterheinrich/InternetOverSpaghetti
Transmitting IP packages over a pair of spaghetti thus demonstrating how media independent IP really is.
42 parts342 - 2 layers59.7 × 57.5 mm
- 2 layers90.8 × 35.6 mm
ERCF easy brd
Tircown/ERCF-easy-brd
More informations on how to reset for flashing:\ https://wiki.seeedstudio.com/Seeeduino-XIAO/#enter-bootloader-mode
28 parts195GPL-3.0 - 2 layers111.3 × 106.4 mm
Super Sixteen v1
matthewcieplak/super-sixteen
Code and schematics for the Super Sixteen Eurorack sequencer
141 parts171 - 2 layers91.4 × 71.1 mm
Pico w rover
NikodemBartnik/Mini-Mars-Rover
Educational robotic platform made to look like a mini mars rover
20 parts143MIT - 2 layers144.1 × 182.2 mm
SHVC CPU-01
starlightk7/OpenSFC
OSHW Reproduction Parts related to the Super Famicom / Super Nintendo game console
498 parts114CERN-OHL-S-2.0
Questions
How big is the Rpi doorbot PCB?
It measures 30 × 65 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Rpi doorbot use?
20 parts, built around the L7805 and NDT3055. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Rpi doorbot KiCad files?
From the bodgery/rpi_doorbot repository on GitHub, at the commit this page was made from: the board is rpi_pcb/rpi_doorbot.kicad_pcb and its schematic rpi_pcb/rpi_doorbot.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Rpi doorbot design in my own project?
Its repository states no licence, so its author keeps all rights: ask bodgery before reusing the design.