Skip to the content
2 layersCnc pendant, the printed circuit board in 3D
Copper layers
2
Thickness
1.6 mm
Parts
16
Nets
42
Pads
134
Tracks, vias
0, 0
Routed
Not yet
KiCad
KiCad 10.0 (file 20260206)
Created
15 Feb 2024
Updated
2 Nov 2026

Overview

Cnc pendant is an open-source printed circuit board by bodgery, from the bodgery/Bodgery-CNC-Router repository on GitHub. It is a 2-layer board with 16 parts on 42 nets.

It is built around the ESP32-C6-MINI-1. Its parts include 10 switches, 2 resistors, 2 diodes, 1 IC and 1 connector. It belongs with the robots and motor control boards and the ESP32 and RISC-V boards of this library.

Main components

1

Parts

16
QtyValueFootprintReferences
10SW_PushButton_Switch_Keyboard:SW_Cherry_MX_1.00u_PCBSW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW9, SW10
2220Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P1.90mm_VerticalR1, R2
2LEDLED_THT:LED_D5.0mmD1, D2
1ESP32-C6-MINI-1RF_Module:ESP32-C6-MINI-1U1
1USB_C_Plug_USB2.0Package_DFN_QFN:WDFN-10-1EP_3x3mm_P0.5mm_EP1.8x2.5mmP1

More from bodgery/Bodgery-CNC-Router

2

Similar boards

  • 4 layers86 × 56 mmRv1106, the printed circuit board in 3D

    Rv1106

    EPSILON0-dev/Raven1106

    Raspberry Pi-style SBC based on the Rockchip RV1106G3

    217 parts4
  • 2 layers25 × 22.6 mmUSlime, the printed circuit board in 3D

    USlime

    ReSummit/uSlime

    Micro form of SlimeVR trackers using BNO085

    48 parts4GPL-3.0
  • 2 layers27.9 × 41.7 mmModbus Adapter, the printed circuit board in 3D

    Modbus Adapter

    tomasmcguinness/esp32-modbus-serial-adapter

    The hardware folder contains a KiCad PCB design, designed around the ESP32-C6-MINI-1. Both the antenna and non-antenna (U1) versions will work here due to the location of the ESP32.

    23 parts4
  • 2 layers40 × 22.1 mmKaze, the printed circuit board in 3D

    Kaze

    Las-Vejas/Kaze

    A very powerful surrounding sensor

    44 parts3MIT
  • 2 layers50 × 45.3 mmTempic HW, the printed circuit board in 3D

    Tempic HW

    jernej13/Tempic

    Small solarpowered ESP32 based indoor/outdoor wifi weather station.

    61 parts2MIT
  • 2 layers30.4 × 52.6 mmMBus ESP Adapter, the printed circuit board in 3D

    MBus ESP Adapter

    tomasmcguinness/matter-esp32-mbus-adapter

    An ESP32-C6 adapter board for wired M-Bus (EN 13757) meters, with firmware examples that expose meter readings to a Matter fabric over Thread.

    42 parts2
  • 2 layers105 × 90 mmWs uc06, the printed circuit board in 3D

    Ws uc06

    wildsystems/ws-uc06

    Custom ESP32-C6 development board with power input protection, relay outputs, opto-isolated I/O, NTC sensor input, and JTAG debugging. Designed as a DIY-friendly controller base.

    84 parts2
  • 2 layers46.3 × 43.4 mmCarbon, the printed circuit board in 3D

    Carbon

    Enderman8843/Carbon

    Carbon is an open-source indoor air quality sensing board designed for accurate VOC, temperature, and humidity monitoring.

    38 parts1

Questions

What parts does the Cnc pendant use?

16 parts, built around the ESP32-C6-MINI-1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Cnc pendant KiCad files?

From the bodgery/Bodgery-CNC-Router repository on GitHub, at the commit this page was made from: the board is cnc-pendant/Untitled/Untitled.kicad_pcb and its schematic cnc-pendant/Pendant_electronics/Pendant_electronics.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Cnc pendant design in my own project?

Its repository states no licence, so its author keeps all rights: ask bodgery before reusing the design.