2 layers116.8 × 30 mm
Type d
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
14 parts3kApache-2.0
2 layers75 × 48 mm
Wall drawer pcb
bob-mccarthy/wall-drawer- Size
- 75 × 48 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 14
- Nets
- 30
- Pads
- 84
- Tracks, vias
- 162, 11
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 11 Jun 2025
- Updated
- 27 Jul 2025
Overview
Wall drawer pcb is an open-source printed circuit board by bob-mccarthy, from the bob-mccarthy/wall-drawer repository on GitHub. It is a 2-layer board of 75 × 48 mm with 14 parts on 30 nets, routed with 162 tracks and 11 vias.
Its parts include 4 capacitors, 4 connectors, 1 resistor, 1 IC and 1 diode. It belongs with the ESP32 and RISC-V boards of this library.
README
README.mdwall-drawer
Parts
14| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 10uF | fab:C_1206 | C3, C4 |
| 2 | C | Capacitor_THT:CP_Radial_Tantal_D6.0mm_P2.50mm | C1, C2 |
| 2 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2, J6 |
| 2 | ~ | TMC2209_SILENTSTEPSTICK:MODULE_TMC2209_SILENTSTEPSTICK | T1, T2 |
| 1 | 1K | fab:R_1206 | R1 |
| 1 | Conn_PWRJack_2x5.5mm_CUIDevices_PJ-002AH-SMT-TR | fab:CUIDevices_PJ-002AH-SMT-TR_PWRJack_2x5.5mm | J5 |
| 1 | Conn_PinHeader_2x02_P2.54mm_Vertical_SMD | fab:PinHeader_2x02_P2.54mm_Vertical_SMD | J1 |
| 1 | Diode_Schottky_MiniSMA | fab:Diode_Schottky_MiniSMA | D1 |
| 1 | Module_XIAO-ESP32C3 | fab:SeeedStudio_XIAO_ESP32C3 | M1 |
| 1 | Regulator_Linear_5.0V_1A_OnSemi | fab:SOT-223-3_TabPin2 | U1 |
Similar boards
- 2 layers32 × 22 mm
- 2 layers34 × 45 mm
2032Charger
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
14 parts915 - 2 layers34 × 109.9 mm
- 2 layers45.3 × 42.7 mm
- 2 layers42.5 × 28.8 mm
C5VRX JACK DIY
Twotoz/C5VRX
Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS
14 parts515GPL-3.0 - 2 layers54 × 47 mm
- 2 layers62 × 24 mm
Questions
How big is the Wall drawer pcb PCB?
It measures 75 × 48 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Wall drawer pcb use?
14 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Wall drawer pcb KiCad files?
From the bob-mccarthy/wall-drawer repository on GitHub, at the commit this page was made from: the board is wall-drawer-pcb/wall-drawer-pcb.kicad_pcb and its schematic wall-drawer-pcb/wall-drawer-pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Wall drawer pcb design in my own project?
Its repository states no licence, so its author keeps all rights: ask bob-mccarthy before reusing the design.