

I2C Sensor Board
I2C EEPROM & Sensor Board A custom 2-layer PCB designed in KiCad, integrating I²C-based memory, temperature sensing, elapsed time recording, and power regulation.
- Size
- 34 × 25 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 18
- Nets
- 14
- Pads
- 63
- Tracks, vias
- 121, 9
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 14 Sep 2026
- Updated
- 23 Oct 2026
Overview
I2C Sensor Board is an open-source printed circuit board by BniX-exe, from the BniX-exe/i2c-eeprom-temp-sensor-board repository on GitHub. It is a 2-layer board of 34 × 25 mm with 18 parts on 14 nets, routed with 121 tracks and 9 vias.
It is built around the AT24CS01-SSHM-B and DS1683S+. Its parts include 6 capacitors, 5 resistors, 4 ICs, 2 diodes and 1 connector. It belongs with the sensors and measurement boards of this library.
Main components
2AT24CS01-SSHM-B
SOIC-8-40℃~+85℃ 1.7V~5.5V 1Kbit 1MHz 5ms I2C SOIC-8 EEPROM ROHSMicrochip TechnologyEEPROMDS1683S+
SOIC-8-40℃~+85℃ 2.5V~5.5V 300uA Built-in I2C Temperature compensation、InsideSRAM/NVRAM、Timestamp function、Alarm function、Power-off retention of registers、Locking and tamper-proof Yes SOIC-8 Real Time Clocks ROHSMaxim Integrated (Analog Devices)Real Time Clocks
README
README.mdI2C EEPROM & Sensor Board A custom 2-layer PCB designed in KiCad, integrating I²C-based memory, temperature sensing, elapsed time recording, and power regulation. Overview This project demonstrates schematic design, component selection, PCB layout, and integration of multiple I²C peripherals on a compact board. The PCB was recreated as a personal portfolio project based on hardware design experience gained during an engineering internship. Hardware Components Component Description AT24C501 I²C EEPROM TMP102 Digital temperature sensor DS1683S+ Elapsed time recorder AP2204K-ADJ Adjustable LDO voltage regulator Schottky Diode Input reverse-current protection LED Alarm status indication Design Features • 2-layer PCB designed using KiCad • 5V input and regulated 3.3V supply • Shared I²C communication bus • 4.7kΩ I²C pull-up resistors • On-board decoupling capacitors • 2×5 external interface connector • Alarm and event signal connections PCB Design Schematic
PCB Layout
Design Tools • KiCad — Schematic Capture • KiCad PCB Editor — PCB Layout and Routing Project Status PCB schematic and layout completed. Physical manufacturing and hardware validation have not been documented. Note This repository contains a personally recreated PCB design intended for educational and portfolio purposes.
Parts
18| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 10nF | Capacitor_SMD:C_0402_1005Metric | C5, C6 |
| 2 | 4.7k | Resistor_SMD:R_0402_1005Metric | R4, R5 |
| 1 | 100nF | Capacitor_SMD:C_0402_1005Metric | C4 |
| 1 | 100uF | Capacitor_Tantalum_SMD:CP_EIA-3528-21_Kemet-B | C3 |
| 1 | 1uF | Capacitor_SMD:C_1206_3216Metric | C1 |
| 1 | 2.2uF | Capacitor_SMD:C_1206_3216Metric | C2 |
| 1 | 390 | Resistor_SMD:R_0402_1005Metric | R3 |
| 1 | 3k | Resistor_SMD:R_0402_1005Metric | R2 |
| 1 | 4.99k | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | AP2204K-ADJ | Package_TO_SOT_SMD:SOT-23-5 | U1 |
| 1 | AT24CS01-SSHM | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | Conn_02x05_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J1 |
| 1 | DS1683S+ | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U4 |
| 1 | LED_Red | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | TMP102xxDRL | Package_TO_SOT_SMD:SOT-563 | U3 |
| 1 | ~ | Diode_SMD:D_1206_3216Metric | D1 |
Similar boards
- 8 layers100 × 100 mm

- 8 layers100 × 100 mm

- 4 layers100 × 100 mm

LED Panel Controller
drewsum/LED_Panel_Controller
Controls a single 64x64 HUB75E LED Panel
590 parts2GPL-3.0 - 4 layers200 × 50 mm

- 4 layers200 × 50 mm

- 10 layers180 × 100 mm

Jetson agx thor baseboard
antmicro/jetson-agx-thor-baseboard
Open hardware baseboard for Nvidia Jetson Thor AGX T5000 System on Module
1,213 parts48Apache-2.0 - 2 layers196.7 × 31.5 mm

- 2 layers81.3 × 99.7 mm

STM32F407VET6
jmz52/Hardware
First public release. Corrected version of prototype board.
103 parts8CC-BY-4.0
Questions
How big is the I2C Sensor Board PCB?
It measures 34 × 25 mm and has 2 copper layers, 1.6 mm thick.
What parts does the I2C Sensor Board use?
18 parts, built around the AT24CS01-SSHM-B and DS1683S+. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the I2C Sensor Board KiCad files?
From the BniX-exe/i2c-eeprom-temp-sensor-board repository on GitHub, at the commit this page was made from: the board is I2C_Sensor_Board.kicad_pcb and its schematic I2C_Sensor_Board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the I2C Sensor Board design in my own project?
Its repository states no licence, so its author keeps all rights: ask BniX-exe before reusing the design.