2 layers
Digital Clock 6 Digits
koson/Digital_Clock_6_Digits
โครงงานนี้ใช้วิธีการเดินสายด้วย Wire wrapping เพื่อลดขั้นตอนในการทำ PCB และเป็นการฝึกให้นักศึกษาได้บัดกรีวงจรที่มีความซับซ้อนในระดับที่เหมาะสม
57 parts3
2 layers80.1 × 96 mm
Diplomen proekt
BN53/diplomna- Size
- 80.1 × 96 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 27
- Nets
- 64
- Pads
- 123
- Tracks, vias
- 139, 7
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 28 Feb 2025
- Updated
- 30 May 2025
Overview
Diplomen proekt is an open-source printed circuit board by BN53, from the BN53/diplomna repository on GitHub, published under the AGPL-3.0 licence. It is a 2-layer board of 80.1 × 96 mm with 27 parts on 64 nets, routed with 139 tracks and 7 vias.
It is built around the ESP32-S3, DA56-11SURKWA and HC-SR04, with the TP4056 among its other parts. Its parts include 16 resistors, 6 ICs, 3 capacitors and 1 switch. It belongs with the ESP32 boards of this library.
Main components
4
ESP32-S3
QFN-56-EP(7x7)-40℃~+105℃ -98.4dBm 150Mbps 2.412GHz~2.484GHz 2.4GHz 21dBm 340mA 3V~3.6V 88mA SPI、USB、UART、ADC、I2C、I2S、PWM WiFi transceiver QFN-56-EP(7x7) RF Transceiver ICs ROHSEspressif SystemsRF Transceiver ICs
DA56-11SURKWA
DIP-180.56 2 25mmx19.05mmx6.8mm 7 Segment 75mW Common Anode Red DIP-18 LED Segment Displays ROHSKingbrightLED Segment Displays
HC-SR04
-- Ultrasonic Receivers, Transmitters ROHSUniversal MicroelectronicsUltrasonic Receivers, Transmitters
TP4056
ESOP-8-40℃~+85℃ 1 1A 35uA 4.2V 4V~6.5V Charging IC Lithium Battery Support Support 恒流充电、恒压充电、涓流充电、自动再充电、充电终止、可编程充电电流、软启动、欠压锁定 ESOP-8 Battery Management ROHSUMWBattery Management
README
README.mdДиплона работа
Parts
27| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | 150Ω | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12, R13, R14, R15, R16 |
| 2 | 1uF | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C1, C2 |
| 1 | 0.1uF | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C3 |
| 1 | 1043P | 1043P (1):BAT_1043P | BT2 |
| 1 | ACTIVE_BUZZER | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Horizontal | U4 |
| 1 | DA56-11SURKWA | 7-seg:DIPS1524W75P254L2500H825Q18N | U1 |
| 1 | ESP32-S3 | components:esp32-s3 | U2 |
| 1 | HC-SR04 | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Horizontal | U3 |
| 1 | MCP1826S | ldo:TO254P482X1024X3124-3P | U6 |
| 1 | SW_Push | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Horizontal | SW1 |
| 1 | TP4056 | tp4056:TP4056-18650 | U5 |
Questions
How big is the Diplomen proekt PCB?
It measures 80.1 × 96 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Diplomen proekt use?
27 parts, built around the ESP32-S3, DA56-11SURKWA, HC-SR04 and TP4056. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Diplomen proekt KiCad files?
From the BN53/diplomna repository on GitHub, at the commit this page was made from: the board is pcb/diplomen_proekt.kicad_pcb and its schematic pcb/diplomen_proekt.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Diplomen proekt design in my own project?
Its repository publishes it under the AGPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers54.1 × 51.9 mm
- 2 layers110 × 80 mm
Noko 2
NikolaiRadke/Noko_2
The do-it-yourself Arduino-based Noko monster. Version 2 with PCB and 3D printed casing.
51 parts3Apache-2.0 - 2 layers90 × 100 mm
PCB MAQUEEN V1
vmfachini/Lumibot
Desenvolvimento de um Hardware Livre, com uso de energia limpa, baseado no micro:bit para criar robôs móveis acessíveis, promovendo ensino de robótica, pensamento computacional e sustentabilidade no Brasil.
62 partsMIT - 2 layers35.4 × 27 mm
- 2 layers42 × 30.8 mm
- 2 layers96.2 × 62.4 mm
- 4 layers40.1 × 60.5 mm
