Skip to the content
4 layers10 × 45 mmLed matrix, the printed circuit board in 3D
Size
10 × 45 mm
Copper layers
4
Thickness
1.6 mm
Parts
9
Nets
7
Pads
48
Tracks, vias
3, 1
Pours
3
Routed
Yes
KiCad
KiCad 4
Created
4 Mar 2019
Updated
13 Oct 2026

Overview

Led matrix is an open-source printed circuit board by Blunk-electronic, from the Blunk-electronic/ET_training repository on GitHub. It is a 4-layer board of 10 × 45 mm with 9 parts on 7 nets, routed with 3 tracks and 1 via.

Its parts include 2 resistors, 2 ICs, 1 diode and 1 crystal. It belongs with the lEDs and displays boards of this library.

README

README.md

ET_training

Parts

9
QtyValueFootprintReferences
3NETCHANGERbel_netchanger:0mm2N1, N2, N3
1100Rbel_resistor:S_0805R1
1220Rbel_resistor:S_0805R002
17400bel_ic:S_SO14IC10
174193bel_ic:S_SO16IC2
1FEMALE_01X06bel_connector_and_jumper:T_FEMALE_01X06_VERTICAL_PITCH_2mm54X1
1redbel_opto:S_0805LED2

More from Blunk-electronic/ET_training

5
  • 2 layers111.8 × 73.7 mmNucleo core, the printed circuit board in 3D

    Nucleo core

    Blunk-electronic/ET_training

    21 parts
  • 2 layersHierarchy 1, the printed circuit board in 3D

    Hierarchy 1

    Blunk-electronic/ET_training

    18 parts
  • 2 layers50.8 × 38.1 mmDemo, the printed circuit board in 3D

    Demo

    Blunk-electronic/ET_training

    5 parts
  • 2 layersV5 libtest, the printed circuit board in 3D

    V5 libtest

    Blunk-electronic/ET_training

    4 parts

Similar boards

  • 4 layers39.3 × 61.8 mmMCL64, the printed circuit board in 3D

    MCL64

    MicroCoreLabs/Projects

    Ted Fried's MicroCore Labs Projects - FPGA CPU cores and emulators for the 8088, 8086, 8051, 6502, 68000, Z80, Risc-V, and also Typewriter and EPROM Emulator projects.

    9 parts534
  • 4 layers79.2 × 26.3 mmHPE FlexibleLOM adapter x4, the printed circuit board in 3D

    HPE FlexibleLOM adapter x4

    TobleMiner/HPE-FlexibleLOM-adapter

    Adapter for using HPE FlexibleLOM cards in full height PCIe slots

    9 parts246GPL-3.0
  • 4 layers74 × 42 mmCoupler isolation, the printed circuit board in 3D

    Coupler isolation

    azonenberg/starshipraider

    Open hardware test equipment

    9 parts193BSD-3-Clause
  • 4 layersErOled096 1 1, the printed circuit board in 3D

    ErOled096 1 1

    BerkeleyHCI/PolymorphicBlocks

    A Python-based hardware description language for PCBs for higher-level (block-diagram / system-architecture level) PCB design through libraries of directly reusable subcircuit generators.

    9 parts94BSD-3-Clause
  • 4 layers108 × 31.8 mmSimm72 rom plcc, the printed circuit board in 3D

    Simm72 rom plcc

    agranlund/raven

    Homemade MC68060 + DSP56303 Atari-compatible computer. Hardware, firmware, and software stack

    9 parts87
  • 4 layers36.3 × 21.1 mmBoard main xiao, the printed circuit board in 3D

    Board main xiao

    m-kozlowski/airbridge

    Wireless adapter for AirSense/AirCurve 10 devices

    9 parts26GPL-3.0
  • 4 layers151.9 × 99.8 mmNqvme template, the printed circuit board in 3D

    Nqvme template

    thorpej/pg68k

    The 68k Playground, a 680x0-based home-brew computer with multiple CPU options

    9 parts15
  • 4 layers27 × 56 mmReceiver, the printed circuit board in 3D

    Receiver

    will127534/CSI-2-FourLane-HDMI-Extender

    A simple MIPI CSI-2 extender with 4-lane support through HDMI cable

    9 parts15MIT

Questions

How big is the Led matrix PCB?

It measures 10 × 45 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Led matrix use?

9 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Led matrix KiCad files?

From the Blunk-electronic/ET_training repository on GitHub, at the commit this page was made from: the board is kicad-projects/projects/led_matrix/led_matrix.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Led matrix design in my own project?

Its repository states no licence, so its author keeps all rights: ask Blunk-electronic before reusing the design.