2 layers56 × 65 mm
SeaTalk1
dotnet/iot
This repo includes .NET Core implementations for various IoT boards, chips, displays and PCBs.
24 parts2.4kMIT
2 layers60 × 31.5 mm
Bloop box tailboard light
bloop-box/bloop-box-tailboard-lightThe board is designed using KiCAD 6 with production and assembly by JLCPCB in mind. All parts are selected to be available from JLCPCB. At the time of writing as many parts as possible are used from their basic library.
- Size
- 60 × 31.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 24
- Nets
- 11
- Pads
- 76
- Tracks, vias
- 38, 4
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 11 Dec 2022
- Updated
- 29 Aug 2024
Overview
Bloop box tailboard light is an open-source printed circuit board by bloop-box, from the bloop-box/bloop-box-tailboard-light repository on GitHub, published under the BSD-2-Clause licence. It is a 2-layer board of 60 × 31.5 mm with 24 parts on 11 nets, routed with 38 tracks and 4 vias.
Its parts include 5 resistors, 3 diodes, 2 connectors and 2 switches.
README
README.mdBloop Box Tailboard Light
The board is designed using KiCAD 6 with production and assembly by JLCPCB in mind. All parts are selected to be available from JLCPCB. At the time of writing as many parts as possible are used from their basic library.
- USB-C Power Input
- 5V only
- Two buttons connected to the Raspberry Pi, per default used for volume control
- Three LEDs
- One to show status of power supply
- Two can be remote-controlled by Raspberry Pi through the Mainboard
Parts
24| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | VAL** | Panelization:mouse-bite-2x5mm-slot-onesided | mouse-bite-2mm-slot, mouse-bite-2mm-slot, mouse-bite-2mm-slot, mouse-bite-2mm-slot |
| 2 | 5k1 | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | 680R | Resistor_SMD:R_0603_1608Metric | R4, R5 |
| 2 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2 |
| 1 | 1k5 | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | Button1 | Button_Switch_THT:SW_Tactile_SPST_Angled_PTS645Vx83-2LFS | SW1 |
| 1 | Button2 | Button_Switch_THT:SW_Tactile_SPST_Angled_PTS645Vx83-2LFS | SW2 |
| 1 | IO1 | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | IO2 | LED_SMD:LED_0603_1608Metric | D3 |
| 1 | LOGO | My_Footprints:CutieMark5mmInverted | G*** |
| 1 | Mainboard | Connector_JST:JST_PH_S8B-PH-K_1x08_P2.00mm_Horizontal | J1 |
| 1 | PWR | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | USB_C_Receptacle_Power | USB4125-GF-A_REVA2:GCT_USB4125-GF-A_REVA2 | J2 |
The 19 most common of 24 parts.
Questions
How big is the Bloop box tailboard light PCB?
It measures 60 × 31.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Bloop box tailboard light use?
24 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Bloop box tailboard light KiCad files?
From the bloop-box/bloop-box-tailboard-light repository on GitHub, at the commit this page was made from: the board is pcb/BloopBox Tailboard Light.kicad_pcb and its schematic pcb/BloopBox Tailboard Light.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Bloop box tailboard light design in my own project?
Its repository publishes it under the BSD-2-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers26.2 × 45.5 mm
PL18 multiprotocol
pascallanger/DIY-Multiprotocol-TX-Module
Multiprotocol TX Module (or MULTI-Module) is a 2.4GHz transmitter module which controls many different receivers and models.
24 parts1.9kGPL-3.0 - 2 layers58 × 35.5 mm
- 2 layers144 × 58 mm
Breakout 80pin 1393476-Connector
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
24 parts1.2k - 2 layers21.6 × 19.5 mm
Micron Logo LED
DraftShift/StealthChanger
Tool changing system for Vorons and other front mount printer motion systems, not just stealthburner.
24 parts1.2kGPL-3.0 - 2 layers158 × 11 mm
Rainbow Matchstick
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
24 parts1.1kGPL-3.0 - 2 layers85.6 × 54 mm
TRACED wio1262-carrier
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
24 parts915 - 2 layers36 × 20 mm
